This study was conducted to improve the durability and decrease the friction of the sintered bushing used in the joints of construction equipment. Research was carried out to examine the effects of the groove pattern on the inner surface. The following results were obtained: (1) The bushing (EK Bush) with grooves on the inner diameter showed increased durability as compared to a non-grooved bushing. (2) The helical-grooved bushing showed the least amount of wear; it was １/10 of the wear of the non-grooved bushing. (3) If the distance between grooves was decreased, then the coefficient of friction also decreased.

Sintered materials have been applied widely in Valve Seat Inserts (VSI). The demands for VSIs are not only good heat and wear resistance but also good machinability. The sintered materials, which are made of a mixture of manganese containing iron powder and certain types of sulfide powder, have superior machinability due to precipitation of the fine MnS particles in the matrix. This report introduces a new VSI material, which has both superior machinability, and wear resistance due to applies of this "MnS precipitation" technique.

Sintered materials have been applied widely in Valve Seat Inserts (VSI). The amount of wear on VSIs increases when used in gas (LPG, CNG) engines because of their dry environments. In this paper, two newly developed high performance VSI materials for gas engines are introduced. These materials applied new techniques, which are both high performance hard particle and new distribution method of solid lubricant, to increase wear resistance.