Even in an era where 8-meter class telescopes are common, small telescopes are considered very valuable research facilities since they are available for rapid follow-up or long term monitoring observations. To maximize the usefulness of small telescopes in Korea, we established the SomangNet, a network of 0.4{1.0 m class optical telescopes operated by Korean institutions, in 2020. Here, we give an overview of the project, describing the current participating telescopes, its scientic scope and operation mode, and the prospects for future activities. SomangNet currently includes 10 telescopes that are located in Australia, USA, and Chile as well as in Korea. The operation of many of these telescopes currently relies on operators, and we plan to upgrade them for remote or robotic operation. The latest SomangNet science projects include monitoring and follow-up observational studies of galaxies, supernovae, active galactic nuclei, symbiotic stars, solar system objects, neutrino/gravitational-wave sources, and exoplanets.

The world-wide need to reduce the energy used and the greenhouse gases emitted during cement manufacture has led to the pursuit of more eco-efficient materials, such as ground granulated blastfurnace slag(GGBS) and fly ash. Especially, GGBS is a by-product generated during the manufacture of pig ions. GGBS can be divided into water-cooled slag(WS) and air-cooled slag(AS). With comparison of WS, the AS is formed by allowing the molten slag to cool relatively slowly under ambient conditions. This study presents experimental findings on the mechanical and durability performance of cement concrete pavement with replacement of cement by WS and/or AS. In order to produce concrete specimens, total replacement of cement by GGBS(WS+AS) was fixed at 40% by mass. Concrete specimens were regularly monitored for the variation of mechanical properties such as flexural strength, compressive strength and initial surface absorption. In addition, in order to assess durability of concrete pavement with WS and/or AS, the chloride ion penetration resistance and scaling resistance tests were adopted, and the corresponding results were compared to those of plain concrete pavement. The test results indicated that the performance of concrete pavement was significantly dependent on the replacement level of WS by AS. Concrete specimens incorporating 20% replacement level of AS showed a poor mechanical performance, while 5% replacement of AS showed a beneficial effect both mechanical and durability performance. Especially, the 5% AS replacement led to the higher resistance of concrete pavement against frost-salt action. Based on the experimental results, the present study would be helpful to design high-performance cement concrete pavement.

An injection unit is the important part which guide the melted resine into the mold. Once injection molding is performed, there will be a pressure of 33 MPa built up inside of injection cylinder body. It was confirmed that the crack occurs by internal stress on the 9 mm material when the machine is used for long time. Because the cylinder rod has material thickness of 9~12 mm during manufacturing process on the cylinder body, there would be 3 mm thickness differences. In this experiment, IDEAS, a computer aided structure analysis software, is used to present the optimized design condition. Insert rod with inner diameter of 9 mm was set as a normal and vary 3 mm in x, y axis direction. When the internal pressure of 33 MPa occurs at the injection unit, fix the x and y direction and find out the stress acting only in z axis. It was confirmed that the stress of 45~82 N/mm 2 was built up when the left of cylinder body had been set 9 mm by using a structure analysis. Also, it has been verified the thickness of the material on the left need to be greater and equal than 12 mm to prevent a material crack by an internal stress.