To address the pressing societal concern in Korea, characterized by the imminent saturation of spent nuclear fuel storage, this study was undertaken to validate the fundamental reprocessing process capable of substantially mitigating the accumulation of spent nuclear fuel. Reprocessing is divided into dry processing (pyro-processing) and wet reprocessing (PUREX). Within this context, the primary focus of this research is to elucidate the foundational principles of PUREX (Plutonium Uranium Redox Extraction). Specifically, the central objective is to elucidate the interaction between uranium (U) and plutonium (Pu) utilizing an organic phase consisting of tributyl phosphate (TBP) and dodecane. The objective was to comprehensively understand the role of HNO3 in the PUREX (Plutonium Uranium Redox Extraction) process by subjecting organic phases mixed with TBPdodecane to various HNO3 concentrations (0.1 M, 1.0 M, 5.0 M). Subsequently, the introduction of Strontium (Sr-85) and Europium (Eu-152) stock solutions was carried out to simulate the presence of fission products typically contented in the spent nuclear fuel. When the operation proceeds, the complex structure takes the following form. 􀜷􀜱􀬶 􀬶􀬾(􀜽􀝍) + 2􀜰􀜱􀬷 􀬿(􀜽􀝍) + 2􀜶􀜤􀜲(􀝋􀝎􀝃) ↔ 􀜷􀜱􀬶(􀜰􀜱􀬷)􀬶 ∙ 2􀜶􀜤􀜲(􀝋􀝎􀝃) Subsequently, separate samples were gathered from both the organic and aqueous phases for the quantification of gamma-rays and alpha particles. Alpha particle measurements were conducted utilizing the Liquid Scintillation Counter (LSC) system, while gamma-ray measurements were carried out using the High-Purity Germanium Detector (HPGe). The distribution ratio for U, Eu (Eu-152), and Sr (Sr-84) was ascertained by quantifying their activity through LSC and HPGe. Through the experiments conducted within this program, we have gained a comprehensive understanding of the selective solvent extraction of actinides. Specifically, uranium has been effectively separated from the aqueous phase into the organic phase using a combination of tributyl phosphate (TBP) and dodecane. Subsequently, samples containing U(VI), Eu(III), and Sr(II) underwent thorough analysis utilizing LSC and HPGe detectors. Our radiation measurements have firmly established that the concentration of nitric acid enhances the selective separation of uranium within the process.

Molten salt reactor (MSR) uses fluoride or chloride based molten salt as a coolant of the system, and fuel materials are dissolved in the molten salt, therefore it can be act as both coolant and nuclear fuel. A few issues have arisen from early-stage research and development program of MSR from Oak Ridge National Laboratory, including corrosion of structural materials and fission product management. For investigating the effect of additives on corrosion of structural materials, Mg(OH)2 and MgCl2*6H2O are added into the NaCl-MgCl2 eutectic salt. Prepared chloride salt is injected into the autoclave in the glove box, as well as corrosion coupons for candidate structural materials for molten chloride salt reactor, SS316, Alloy 600, and C-276 are also prepared. The temperature is set as 700°C. After 500 h corrosion experiment, the samples are taken out from the autoclave, and they are analyzed with scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). SS316 samples show weight loss with all salt conditions, while Alloy 600 and C-276 show weight gain after the corrosion experiment.

Pyroprocessing is a promising technique for the treatment of damaged fuel debris (corium) generated by severe nuclear accidents. The debris typically consists of (U, Zr)O2 originating from the UO2 fuel and Zr alloy-based cladding. By converting the corium to a metallic form, the principal components of the fuel can be recovered through subsequent electrorefining, allowing for long-term storage or final disposal. A study investigated the reduction of zirconium oxide compounds by Li metal as a reductant in molten LiCl salt. This research explored the feasibility of treating damaged nuclear fuel debris, which mainly consists of (U, Zr)O2. The results showed that ZrO2 was successfully reduced to Zr metal by Li metal in LiCl salt at 650C without the formation of Li2ZrO3. In particular, Zr metal was produced without the formation of Li2ZrO3 when LiCl salt containing a high concentration of Li metal was used. However, Zr metal was produced with Li2ZrO3 when LiCl salt containing both Li metal and Li2O was added. This suggests that the concentration of Li metal in the LiCl salt is an important factor in determining the formation of Li2ZrO3. The study also demonstrated that Li2ZrO3 was partially reduced to Zr metal by Li metal in LiCl salt. This finding suggests that Li metal may be effective in reducing other oxide compounds in molten LiCl salt, which could be useful in the treatment of corium. Overall, the research provides valuable insights into the feasibility of using pyroprocessing for the treatment of corium. The ability to recover and store the principal components of the fuel through electrorefining could have important implications for the long-term management of nuclear waste.

Healthymi is a new sweetpotato variety developed from Mokpo Experiment Station, National Institute of Crop Science(NICS), RDA in 2003, which was for the utilization as food and starch. This variety was selected from the cross between Seonmi and MI9001-12