Radioactive liquid waste generated during the operation of domestic nuclear power plants is treated through a somewhat different liquid radwaste system (LRS) for each plant. Prior to the introduction of standard nuclear power plants, LRS used a concentrated water dry system (CWDS) to evaporate liquid waste and manage it in the form of dry powder. The boron-containing radioactive liquid waste dry powder was solidified using paraffin from 1995 to 2010, and about 3,650 drums (based on 200 L) of paraffin solidified drums are currently stored in nuclear power plants. Paraffin solidification drums do not meet the acceptance criteria for radioactive waste repositories because it is difficult to secure the homogeneity of the solidified body and there are concerns about leaching of radioactive waste due to the low melting point of paraffin. In order to solve this problem and safely permanently dispose of paraffin solidification drums, the characteristics of dry powder paraffin solidification drums containing boron-containing radioactive liquid waste must be analyzed and appropriate treatment technology utilizing the results must be introduced. This study analyzes the physical properties of paraffin, the chemical properties of boron-containing radioactive waste dry powder, and the physicochemical properties of paraffin solidification powder, and proposes an appropriate alternative technology for treating boron-containing radioactive waste dry drum. When disposing of the paraffin solidification drum with boron-containing radioactive liquid waste dry powder, the solidification body must be effectively withdrawn from the drum and the paraffin must be completely separated from the solidification body. When disposing the drum, the solidified material must be effectively extracted from the drum and the paraffin must be completely separated from the solidified material. Afterwards, the paraffin must be self-disposed, and the radioactive waste must be disposed of in accordance with acceptance criteria of repository. We looked at how each characteristic of the paraffin solidification drum with boron-containing radioactive liquid waste dry powder can be utilized in each of the above treatment processes.

Nuclear power plants use ion exchange resins to purify liquid radioactive waste generated while operating nuclear power plants. In the case of PHWR, ion exchange resins are used in heavy water and dehydration systems, liquid waste treatment systems, and heavy water washing systems, and the used ion exchange resins are stored in waste resin storage tanks. The C-14 radioactivity concentration in the waste resin currently stored at the Wolseong Nuclear Power Plant is 4.6×106 Bq/g, exceeding the low-level limit, and if all is disposed of, it is 1.48×1015 Bq, exceeding the total limit of 3.04×1014 Bq of C-14 in the first stage disposal facility. Therefore, disposal is not possible at domestic low/medium-level disposal facilities. In addition, since the heavy water reactor waste resin mixture is stored at a ratio of about 20% activated carbon and zeolite mixture and about 80% waste resin, mixture extraction and separation technology and C-14 desorption and adsorption technology are required. Accordingly, research and development has been conducted domestically on methods to treat heavy water waste resin, but the waste resin mixture separation method is complex and inefficient, and there are limitations in applying it to the field due to the scale of the equipment being large compared to the field work space. Therefore, we would like to introduce a resin treatment technology that complements the problems of previous research. Previously, the waste resin mixture was extracted from the upper manhole and inspection hole of the storage tank, but in order to improve limitations such as worker safety, cost, and increased work time, the SRHS, which was planned at the time of nuclear power plant design, is utilized. In addition, by capturing high-purity 14CO2 in a liquid state in a high-pressure container, it ensures safety for long-term storage and is easy to handle when necessary, maximizing management efficiency. In addition, the modularization of the waste resin separation and withdrawal process from the storage tank, C-14 desorption and monitoring process, high-concentration 14CO2 capture and storage process, and 14CO2 adsorption process enables separation of each process, making it applicable to narrow work spaces. When this technology is used to treat waste resin mixtures in PHWR, it is expected to demonstrate its value as customized, high-efficiency equipment that can secure field applicability and safety and reflect the diverse needs of consumers according to changes in the working environment.

Laser cutting technology capable of remote cutting is being developed to reduce radiation exposure to workers and minimize secondary waste generation when dismantling highly polluted nuclear power plant facilities (reactors, pressurizers, steam generators, coolant pumps, etc.). Laser cutting proceeds in air or water, and at this time, secondary products containing radioactive materials are inevitably generated. In air cutting, dust and aerosol are generated, and in underwater cutting, aerosol, water vapor, dispersed particles (colloid, suspension), sediment (dross, sediment), and radioactive waste liquid are generated. Dispersed particles float in the form of fine particles in water, increasing the turbidity of water as cutting progresses, hindering work, and aerosols contain micrometer-sized particles together with water vapor, which can threaten the safety of workers. Particles dispersed in water and aerosol are within 10% of the mass ratio among secondary products, but the volume they occupy is very large, which can have a significant impact on the environment as well as a burden on treatment capacity. Various characterization methods are being developed to diagnose the generation mechanism and physical and chemical properties of laser cutting secondary products in real time and to secure technologies for collecting and removing dispersed particles and aerosols in water. This study introduces a real-time laser cutting secondary product characteristic evaluation method that can identify the key mechanisms of secondary product generation by analyzing the plasma formation process on laser cutting surface and behavior of aerosol, underwater dispersed particles produced by secondary products, as well as physical and chemical properties in real time with various measurement technologies such as Optical Emission Spectrometer (OES), Particle Size Analyzer (PSA), Scanning Electron Microscopy (SEM), X-ray Diffraction (XRD), Energy-dispersive X-ray spectroscopy (EDX), Transmission electron microscopy (TEM) and Inductively Coupled Plasma Time-of-Flight Mass Spectrometry (ICP-TOF-MS).

This study is about the production of radiation sources of simulated concrete and soil reference materials to verify the validity of the quality establishment and measurement of the detector (HPGe) of the radioactive soil and concrete waste classification system, which is being developed to quickly and accurately classify nuclear decommissioning waste. Specific activity of gamma nucleus among radioactive wastes is evaluated using gamma spectroscopy. At this time, in order to verify the validity and reliability of measuring equipment, it shall be a standardized substance of the same medium as nuclear decommissioning waste (chemical ingredients, particles, density, etc.) in order to correct the energy and efficiency of gamma nuclide analysis equipment. The CRM used for the detector’s energy correction used a 1 L Marinelli beaker standard correctional radiation source consisting of 10 radioactive isotopes. In order to correct efficiency, in accordance with the production and certification process of the Korea Standards and Research Institute, it has produced artificial simulated radioactive concrete similar to nuclear decommissioning waste (30% for cement, 60% for regulation and 10% for bentonite). The radioactive homogeneity of the simulated concrete reference materials was evaluated using dispersion analysis (ANOVA) in accordance with ISO Guide 35, while 137Cs and 60Co of concrete reference materials were able to obtain homogeneous measurements both in and between bottles. The self-absorption rate of the simulated concrete reference material was determined by the MCNP computer simulation measurement method, and the self-absorption correction coefficients of 137Cs and 60Co were assessed at 0.995 and 0.996, respectively, and the standard value for the radiation of the simulated concrete reference material was calculated on the weighted average of the measurements of 20 samples. The uncertainty about the reference value was calculated by combining measurement uncertainty (Type B evaluation), bottle to bottle standard deviation, and uncertainty within bottle by modifying the formula suggested in ISO Guide 35. The concentration of 137Cs and 60Co of reference materials was divided into high-speed measurement mode and precision measurement mode in consideration of the self-disposal standard. The reference value and uncertainty of expansion among reference materials for high-speed measurement mode were rated at 1,032.7 ± 64.0 Bq·kg−1and 1,083.7 Bq·kg−1, respectively. The standard value and expansion uncertainty for 137Cs and 60Co among reference materials for precision measurement mode were rated at 113.7 ± 10.0 Bq·kg−1 and 122.3 ± 10.3 Bq·kg−1, respectively.

As the plan for the nuclear dismantlement due to the permanent shutdown of Kori-1 and Wolseong- 1 nuclear power plants has been concretized, a “movable radionuclide analysis system” is being developed that can quickly and accurately analyze large amounts of radioactive waste generated on the sites during dismantling. This system has various advantages from the perspective of strict regulations on the radioactive waste movement and social acceptability, such as preventing unexpected accidents while moving on the national highway or expressway, reducing various documents and immediate response to dismantling plans. Currently the system is being developed to be equipped with previously developed sample pretreatment and radioactivity measuring equipment and automated volatile and nonvolatile nuclide separation equipments, but to ensure mobile stability, it needs to analyze factors and establish stability standards. In the KS Q ISO/IEC 17025:2017 standard, the requirements for “facilities and environmental conditions” are a very important factor in building reliability for consumers as part of the quality guarantee for this facility. In order to meet the requirements, the technical standards of various test equipment to be installed in this facility were investigated. The physical, chemical, and radiological hazards that could affect the safety of the equipment and workers in the process of moving the equipment between nuclear power plants or between nuclear dismantling sites were derived from vibrations, rapid changes in temperature and humidity, and the spread of contamination from radioactive waste samples. Therefore, the scope of application of the law, which is the basis for securing stability during movement, was classified into two situations: movement from facility manufacturer to installation site (non-contaminated) and movement from primary to secondary use (contaminated). And in order to investigate the Nuclear Safety Act, enforcement ordinances, and radiation safety management, and to establish standards for packaging and transportation of radioactive materials, the results of transportation tests and transport details were compared and analyzed. Finally, the air suspension systems and the automatic temperature and humidity control devices were analyzed to establish standards for securing stability against the vibration and the sharp changes in the temperature and humidity, and countermeasures such as accident measures in accordance with the Enforcement Decree of the Nuclear Safety Act were also investigated.

원전 해체는 일반적으로 5단계로 준비, 제염, 절단 및 철거, 폐기물 처리, 환경 복원으로 진행된다. 효율적인 원전 해체를 위해서는 작업자의 안전, 비용 대비 효과, 폐기물 최소화, 재사용 가능성 등이 고려되어야 한다. 또한, 작업자의 안전 및 측정 기술이 확보되어야 원전 해체 작업의 최적 효율을 낼 수 있으며 이를 위해서는 계통 및 기기의 정확한 측정 기술이 필요하다. 원전 해체 시 현장에서 사용할 수 있는 대표적인 In-Situ 방법으로는 CZT, Gamma Camera, ISOCS 등이 있다. 본 연구에서는 대표 시료 채취 없이 원전 해체 시 현장에서 적용될 수 있는 ISOCS를 이용하여 S/G Water Chamber 지점에 대 하여 측정을 수행하였다. 측정 방법은 ISOCS의 HPGe 검출기를 증기 발생기 수실 하부 중앙을 향해 위치하였으며, 이때 검출기는 주변 방사선장 감소를 위해 납 차폐체를 장착하였다. 차폐체 두께는 5 cm인 원통형 납 차폐체를 장착하였으며, 검출 기 전면에는 30도 콜리메이터를 장착하여 측정을 수행하였다. 측정값에 검증을 위해 실제 측정 방법과 동일하게 Microshield를 이용하여 측정한 값과 GEANT4 코드를 이용하여 모델링 하였다. 비교 결과 1.0×101~1.0×102 Bq 정도 차이를 보였으며, 이는 측정 시 주변 방사선의 영향, 모델링의 정밀도 등으로 오차를 줄일 수 있을 것으로 보인다. 본 논문의 연구 결과를 바탕으로 측정값의 정확도 및 신뢰도를 분석하고 향후 해체 작업 시 직접 측정 방법의 적용성에 대한 신뢰도를 높이고자 한다.

본 논문에서는 원전해체 시 적용 가능한 제염기술을 조사하여 분석하였다. 이를 기반으로 최적의 제염기술을 선정하기 위 해 의사결정 기법(EXPERT-CHOICE)을 사용하여 기술성을 평가하였다. 이 평가방법은 해당 분야의 전문가로 이루어진 전 문가 집단에 의해 수행되는 것이 일반적이다. 가중치를 고려한 결과는 각 기준에 대한 가중치에 평가점수를 곱한 총합을 구 하는 식으로 수행하였다. 평가 점수를 3단계로 하여 High, Medium, Low로 구분한 후 가중치를 부여하여 차별화 시킬 수 있 다. 하위분류 기준의 세분화와 각 기준 별 가중치의 추가 정량화를 통하여 기술성 분석의 수준을 제고할 수 있고, 좀 더 설 득력 있는 결과의 도출을 예상할 수 있다. 평가의 기본 가정은 각 기준 별 가중치를 전문가 조사에 의해 부여하며, 평가 기 준은 High에 좀 더 비중을 주는 식으로 차별화 하였다. 이를 반영하면 H, M, L는 대략“10:5:1”의 비율로 평가 점수를 부여 받는데, 이는 EXPERT-CHOICE 기법의 최적화 분석에 따른 것이다. 최고 및 최저값을 제외한 나머지 결과값의 평균을 평가 치로 고려하였다.

발전소 해체 및 핵종누출 시 원자력 관련 시설 주변의 방사성오염 토양은 주민의 거주 및 공업용지로의 재사용을 위해 토양 제염이 불가피하다. 본 논문에서는 기존 토양복원 기술을 생물학적, 물리/화학적, 열적 처리로 분류하고 각 기술의 원리 및 처리 물질을 분석 및 조사를 통해 방사성물질로 오염된 토양에 적용 가능한 기술을 선정하였다. 선정된 기술을 평가하기 위 해 경제성, 적용성, 기술성을 고려하였다. 또한 High, Medium, Low로 가중치를 적용하여 평가하였다. 이에 따른 결과값을 바탕으로 방사성물질로 오염된 토양에 가장 적합한 토양제염 방법을 제시하고자 한다.