본 연구에서는 에너지 소모가 큰 기존 진공 증류 공정의 대안으로 친환경이면서 에너지 효율적인 투과증발 분리 공정을 이용하여 1,2 hexane diol/water (1,2 HDO/water) 혼합물에서 물을 분리하는 데 적용되었다. 사용한 분리막은 glutaraldehyde (GA)로 가교된 PVA를 알루미나 중공사 막(Al-HF) 내부에 코팅하여 사용하였다. 1,2 HDO/water 투과증발 분리공 정에서는 PVA/GA 비율, 경화 온도 및 투과증발 분리공정 운전 조건에 대한 막의 최적화를 연구하였다. 장기 안정성 시험에 서 PVA/GA (몰 비율 = 0.08, 경화 온도 = 80°C) 로 코팅된 Al-HF 막이 공정온도 40°C에서 1.90~2.16 kg/m2h 범위의 투과 도를 보였으며, 투과용액의 수분 함량은 99.5% (separation factor = 68) 이상이었다.

In the epoxy resin manufacturing process, carcinogenic ECH (epichlorohydrin), IPA (isopropanol) and Biphenol-A materials has been generally used. After the reaction, byproducts containing ECH/IPA/Water is remained along with final product. But, in the recovery process, ECH and IPA forming an azeotropic mixture with water containing feed solution at any temperature condition, the recovery of high purity ECH is difficult only by distillation. Therefore, pervaporation process could be suitable countermeasure due to its mild operation condition for separation of azeotropic mixtures at the point of energy and cost saving. In this study, Alumina-PVA composite membrane was prepared for pervaporation dehydration of ECH/IPA/Water feed mixtures and pervaporation performance and stability of the prepared composite membrane was identified.

The modification of Silicotungstic acid (STA) was done by Melamine and Mixed matrix membranes from the Melamine modified Silico tungstic acid (M-STA) particles were prepared for the pervaporation dehydration of Water -Isopropanol (IPA) mixture. The characterization of the membranes were done by FTIR, SEM, EDS AFM XRD, and contact angle measurements. The M-STA loaded composite membranes showed improved pervaporation performance in comparison to the virgin membrane. The 8 wt% M-STA loaded (M8-MSTA) membrane gave an optimum pervaporation performance having flux = 0.36 kg/m2h, separation factor 485.6 for 20 wt% water -isopropanol feed composition at 60 0C was observed.

Blended membranes of hydrophilic polymers poly (vinyl alcohol) (PVA) and poly(vinyl amine) (PVAm) were prepared and crosslinked with glutaraldehyde. The characterization of membranes were done by using FTIR, XRD, DSC, SEM and swelling study. MB1.5 membrane was the best one in all since it exhibited higher separation index. By using blend membrane (MB1.5), the flux through a 65-mm film increased from 0.01 to 0.47 kg/m2h at an acetonitrile/water feed ratio between 20/80 and 5/95 w/w at 30°C while separation factor increased from the 5055 to 100.84 attributed to the higher hydrophilicity of blend membranes. On comparison of pervaporation data with water-acetonitrile vapor-liquid equilibrium data it was observed that the membrane acted as third phase to effectively break the azeotropes.