본 연구에서는 초고층건축물의 풍진동 모니터링을 위한 시스템식별기법의 현장적용성을 평가하였다. 실제 아웃리거-벨트월 을 횡력저항 시스템으로 가지는 실제 63층 RC구조물을 대상으로 상시 및 강풍시 응답을 모니터링하였으며, 진동수영역분해(FDD), 랜덤감소(RDT)기법, 부분공간시스템식별(SSI)법을 사용하여 진동특성을 식별하였다. 건물의 평면이 정방형이고, 두 개의 횡방향 모드의 진동수는 매우 유사하였다. 모든 식별기법에서 태풍과 같이 강한 외력이 존재할 경우 뿐만 아니라 상시미진동 에서도 구조물의 모드 특성을 식별할 수 있었다. 현장에서의 적용성 평가결과, 계산속도는 FDD가 가장 빨랐으며, RDT가 가장 간단한 프로그래밍 절차를 가지고 있음을 확인하였다.

The fisheries industry has led the Korean economy, and has been achieving high-level position in the world. However, this industry meets aging, low growth and profit. In order to overcome this critical situation, it is needed to understand the overall status of industry. In industry level, most of previous researches focused on ocean industry rather than fisheries. In addition, scholars have been getting a lot of attention about fisheries cooperatives, fishing-ports, methods of fishery, and manufacturing process in fisheries sector. The aim of this research is analysis of domestic fisheries industry’s managerial performance using data envelopment analysis(DEA) considering operating and scale view. Furthermore, the comparative analysis is performed by firm size, and industry type. In results, fisheries industry’s managerial performance is not high, overall. In more detail, most of big size firms are under decreasing returns to scale(DRS) status. Fishery processing industry’s performance is low, and fishery distribution industry has the best performance. This paper suggests that transferring operating capability from big firms to small firms, and policy supports and firm’s activities should be accompanied for high-value added in fisher, and fishery processing industries.

본 논문에서는 국제해사기구의 데이터수집 시스템 도입에 따른 MRV 지원 및 국제해운 에너지 효율 포탈 시스템에 대한 기술적 검증을 수행하였다. 데이터 수집 시스템과 연료 사용량 데이터 수집 방법론을 포함하는 SEEMP 가이드라인의 주요 내용을 검토하고, EU MRV와 차이점을 분석하여 MRV에 대한 국내 해운선사의 대응전략을 제시하고 이에 대한 MRV 지원시스템의 기술적 적합성을 검토하였다. MRV 지원시스템은 배출량 데이터를 원시단계에서 최종단계까지 통합 관리함으로서 검증을 위한 비용과 업무 효율성을 높일 수 있으며, 현재 해운선사의 보고절차를 유지하면서 데이터 변환 기능을 통해 표준양식으로 배출량 데이터를 수집하고 보고 할 수 있다. 또한, 포탈시스템에 대한 접근권한을 구분하여 해운선사의 데이터 수집과 보고, 검증자의 데이터 검증업무를 지원할 수 있으며 전자적인 방법으로 보고서 제출이 가능하여 MRV 국제 규제에 대한 대응이 가능하다.

Naval combat system developed in-country is progressing at an alarming rate since 2000. ROK navy will be achieved all vessels that have combat system in the near future. The importance of System Engineering and Integrated Logistics Support based on reliability analysis is increasing. However, reliability analysis that everyone trusted and recognized is not enough and applied practically for development of Defense Acquisition Program. In particular, Existing Reliability Analysis is focusing on reliability index (Mean Time Between Failure (MTBF) etc.) for policy decision of defense improvement project. Most of the weapon system acquisition process applying in the exponential distribution simply persist unreality due to memoryless property. Critical failures are more important than simple faults to ship’s operator. There are no confirmed cases of reliability analysis involved with critical failure that naval ship scheduler and operator concerned sensitively.Therefore, this study is focusing on Mean Time To Critical Failure (MTTCF), reliability on specific time and Operational Readiness Float (ORF) requirements related to critical failure of Patrol Killer Guided missile (PKG) combat system that is beginning of naval combat system developed in-country. Methods of analysis is applied parametric and non-parametric statistical techniques. It is compared to the estimates and proposed applications. The result of study shows that parametric and non-parametric estimators should be applied differently depending on purpose of utilization based on test of normality. For the first time, this study is offering Reliability of ROK Naval combat system to stakeholders involved with defense improvement project. Decision makers of defense improvement project have to active support and effort in this area for improvement of System Engineering.

Much of the data used in the analysis of environmental ecological data is being obtained over time. If the number of time points is small, the data will not be given enough information, so repeated measurements or multiple survey points data should be used to perform a comprehensive analysis. The method used for that case is longitudinal data analysis or mixed model analysis. However, if the amount of information is sufficient due to the large number of time points, repetitive data are not needed and these data are analyzed using time series analysis technique. In particular, with a large number of data points in the current situation, when we want to predict how each variable affects each other, or what trends will be expected in the future, we should analyze the data using time series analysis techniques. In this study, we introduce univariate time series analysis, intervention time series model, transfer function model, and multivariate time series model and review research papers studied in Korea. We also introduce an error correction model, which can be used to analyze environmental ecological data.

The present study has aimed at analyzing the technical and scale efficiencies of credit utilization by the farmer-borrowers in Chittoor district of Andhra Pradesh, India. DEA approach was followed to analyze the credit utilization efficiency and to analyze the factors influencing the credit utilization efficiency, log-linear regression analysis was attempted. DEA analysis revealed that, the number of farmers operating at CRS are more in number in marginal farms (40%) followed by other (35%) and small (17.5%) farms. Regarding the number of farmers operating at VRS, small farmers dominate the scenario with 72.5 per cent followed by other (67.5%) and marginal (42.5%) farmers. With reference to scale efficiency, marginal farmers are in majority (52.5%) followed by other (47.5%) and small (25%) farmers. At the pooled level, 26.7 per cent of the farmers are being operated at CRS, 63 per cent at VRS and 32.5 per cent of the farmers are either performed at the optimum scale or were close to the optimum scale (farms having scale efficiency values equal to or more than 0.90). Nearly 58, 15 and 28 percents of the farmers in the marginal farms category were found operating in the region of increasing, decreasing and constant returns respectively. Compared to marginal farmers category, there are less number of farmers operating at CRS both in small farmers category (15%) and other farmers category (22.5%). At the pooled level, only 5 per cent of the farmers are operating at DRS, majority of the farmers (73%) are operating at IRS and only 22 per cent of the farmers are operating at CRS indicating efficient utilization of credit. The log-linear regression model fitted to analyze the major determinants of credit utilization (technical) efficiency of farmer- borrowers revealed that, the three variables viz., cost of cultivation and family expenditure (both negatively influencing at 1% significant level) and family income (positively influencing at 1% significant level) are the major determinants of credit utilization efficiency across all the selected farmers categories and at pooled level. The analysis further indicate that, escalation in the cost of cultivation of crop enterprises in the region, rise in family expenditure and prior indebtedness of the farmers are showing adverse influence on the credit utilization efficiency of the farmer-borrowers.

본 연구는 다중빔 음향측심 자료를 바탕으로 침몰선박의 정확한 형상 및 해저지형에 대한 정보를 분석하였다. 다양한 영상 자료처리를 통해 현재 침몰선박의 상태를 분석하였다. 해당 자료와 과거 조사 자료의 비교를 통하여 침몰선박 상태 변화 및 주변지형의 변화를 해석하였다. 분석대상 선박 중 퍼시픽프랜드호의 경우 조류에 의한 침·퇴적으로 인해 선수-선미의 지형변화가 뚜렷하게 나타나는 특징을 알 수 있었다. 그리고 제7해성호의 경우 2011년 국립해양조사원 영상자료에서는 선수 일부가 유지된 상태였으나, 2015년 조사 영상에서는 선수 일부가 붕괴된 것을 확인할 수 있었다. 이는 오랜 기간 선박이 해저에 방치되면서 조류 및 화물의 하중 등과 지속적인 부식으로 선체가 붕괴된 것으로 추정된다. 따라서 잔존연료 유출 및 주변 해양오염이 발생할 수 있어 지속적인 모니터링이 필요할 것으로 판단된다. 침몰선박의 영상분석을 통해 침몰선박이 수심과 조류에 의한 영향을 많이 받은 지역일 경우 지질학적 특성과 퇴적물의 침·퇴적 양상에 따라 침몰선박의 구조 안전성에 상당한 영향을 줄 것으로 판단되며, 부식으로 인한 선체의 변화는 계속적으로 변화될 것으로 추정된다. 따라서 지질학적 특성을 고려한 잔존연료 유출 및 주변 환경 변화에 대하여 침몰선박의 변화에 따라 예측‧대응하는 기술의 개발이 필요하다.

This study proposes a methodology to analyse social networks among participating design engineers during product development projects. The proposed methodology enables product development managers or the participating design engineers to make a proper decision on product development considering the performance of participating design engineers. It considers a product development environment where an integrated product data management (PDM) system manages the product development data and associated product development processes consistently in its database, and all the design engineers share the product development data in the PDM database for their activities in the product development project. It provides a novel approach to build social networks among design engineers from an operational product development data in the PDM database without surveys or monitoring participating engineers. It automatically generates social networks among the design engineers from the product data and relationships specified by the participants during the design activities. It allows analysts to gather operational data for their analysis without additional efforts for understanding complex and unstructured product development processes. This study also provides a set of measures to evaluate the social networks. It will show the role and efficiency of each design engineers in the social network. To show the feasibility of the approach, it suggests an architecture of social network analysis (SNA) system and implemented it with a research-purpose PDM system and R, a statistical software system. A product configuration management process with synthetical example data is applied to the SNA system and it shows that the approach enables analysts to evaluate current position of design engineers in their social networks.

목 적: 산소투과율이 낮은 콘택트렌즈의 착용은 각막합병증 발생의 원인이 된다. 산소투과율이 높은 실 리콘 하이드로젤 제품의 사용이 각막합병증 예방에 도움 되기 때문에 국내에서도 다수 출시되었지만, 제품 마다 산소투과율이 많이 다른 상황이다. 일부 제품은 산소투과율이 표기되지 않은 상태로 판매되어 그 정보 가 알려져 있지 않다. 식품의약품안전처의 허가정보를 분석하여 국내에서 판매중인 소프트 콘택트렌즈 제품 의 현황을 살펴보고자 한다. 방 법: 식품의약품안전처에서 허가된 소프트 콘택트렌즈 131종을 대상으로 재질은 실리콘 하이드로젤과 하이드로젤이고, 사용목적은 일반 제품과 미용 제품으로 분류하며, 산소투과율은 각막에 필요한 최소 산소 투과율 12, 눈을 뜬 상태에서 각막부종이 생기지 않을 Dk/t 24, 눈을 감은 상태에서 각막부종이 생기지 않 는 Dk/t 87을 기준으로 분류하여 제품의 특성을 분석하였다. 결 과: 국산 하이드로젤 제품은 산소투과율이 Dk/t 12보다 낮은 제품의 비율이 67.2%(41개)이었고, 수입 하이드로젤 제품은 산소투과율 Dk/t 12보다 높은 제품의 비율이 85.7%(12개)였다. 국산 실리콘 하이드로젤 제품은 산소투과율 Dk/t 24보다 낮은 제품의 비율이 73.8%(31개)이었고 성능이 낮은 Dk/t 12보다 낮은 제 품이 52.4%(22개)로 과반을 차지했다. 수입 실리콘 하이드로젤 제품은 산소투과율 Dk/t 24보다 높은 제품 의 비율이 100%(14개)였고, 연속착용이 가능한 Dk/t 87 이상인 제품의 비율이 42.9%(6개)였다. 결 론: 2011년 10.0%였던 실리콘 하이드로젤 처방률이 2015년 24.0%로 증가하였지만, 국내에서 출시된 실리콘 하이드로젤 제품 가운데 일부 제품이 산소투과율이 표기와 다르거나 또는 표기되지 않아 부작용이 발 생할 수 있으므로 제품선택에 주의가 요구된다.

India is largest producer of banana in the world producing 29.72 million tonnes from an area of 0.803 million ha with a productivity of 35.7 MT ha-1 and accounted for 15.48 and 27.01 per cent of the world’s area and production respectively (www.nhb.gov.in). In India, Tamil Nadu leads other states both in terms of area and production followed by Maharashtra, Gujarat and Andhra Pradesh. In Rayalaseema region of Andhra Pradesh, Kurnool district had special reputation in the cultivation of banana in an area of 5765 hectares with an annual production of 2.01 lakh tonnes in the year 2012-13 and hence, it was purposively chosen for the study. On 23rd November 2003, the Government of Andhra Pradesh has commenced a comprehensive project called ‘Andhra Pradesh Micro Irrigation Project (APMIP)’, first of its kind in the world so as to promote water use efficiency. APMIP is offering 100 per cent of subsidy in case of SC, ST and 90 per cent in case of other categories of farmers up to 5.0 acres of land. In case of acreage between 5-10 acres, 70 per cent subsidy and acreage above 10, 50 per cent of subsidy is given to the farmer beneficiaries. The sampling frame consists of Kurnool district, two mandals, four villages and 180 sample farmers comprising of 60 farmers each from Marginal (<1ha), Small (1-2ha) and Other (>2ha) categories. A well structured pre-tested schedule was employed to collect the requisite information pertaining to the performance of drip irrigation among the sample farmers and Data Envelopment Analysis (DEA) model was employed to analyze the performance of drip irrigation in banana farms. The performance of drip irrigation was assessed based on the parameters like: Land Development Works (LDW), Fertigation costs (FC), Volume of water supplied (VWS), Annual maintenance costs of drip irrigation (AMC), Economic Status of the farmer (ES), Crop Productivity (CP) etc. The first four parameters are considered as inputs and last two as outputs for DEA modelling purposes. The findings revealed that, the number of farms operating at CRS are more in number in other farms (46.66%) followed by marginal (45%) and small farms (28.33%). Similarly, regarding the number of farmers operating at VRS, the other farms are again more in number with 61.66 per cent followed by marginal (53.33%) and small farms (35%). With reference to scale efficiency, marginal farms dominate the scenario with 57 per cent followed by others (55%) and small farms (50%). At pooled level, 26.11 per cent of the farms are being operated at CRS with an average technical efficiency score of 0.6138 i.e., 47 out of 180 farms. Nearly 40 per cent of the farmers at pooled level are being operated at VRS with an average technical efficiency score of 0.7241. As regards to scale efficiency, nearly 52 per cent of the farmers (94 out of 180 farmers) at pooled level, either performed at the optimum scale or were close to the optimum scale (farms having scale efficiency values equal to or more than 0.90). Majority of the farms (39.44%) are operating at IRS and only 29 per cent of the farmers are operating at DRS. This signifies that, more resources should be provided to these farms operating at IRS and the same should be decreased towards the farms operating at DRS. Nearly 32 per cent of the farms are operating at CRS indicating efficient utilization of resources. Log linear regression model was used to analyze the major determinants of input use efficiency in banana farms. The input variables considered under DEA model were again considered as influential factors for the CRS obtained for the three categories of farmers. Volume of water supplied (X1) and fertigation cost (X2) are the major determinants of banana farms across all the farmer categories and even at pooled level. In view of their positive influence on the CRS, it is essential to strengthen modern irrigation infrastructure like drip irrigation and offer more fertilizer subsidies to the farmer to enhance the crop production on cost-effective basis in Kurnool district of Andhra Pradesh, India. This study further suggests that, the present era of Information Technology will help the irrigation management in the context of generating new techniques, extension, adoption and information. It will also guide the farmers in irrigation scheduling and quantifying the irrigation water requirements in accordance with the water availability in a particular season. So, it is high time for the Government of India to pay adequate attention towards the applications of ‘Information and Communication Technology (ICT) and its applications in irrigation water management’ for facilitating the deployment of Decision Supports Systems (DSSs) at various levels of planning and management of water resources in the country.

This study of small ＆ Medium-Sized construction sites construction disaster prevention technology conduction-site visits from the map results report by the inspector on-site advice and technical guidance for the analysis of deficiencies and potential construction of disaster revealed the potential factors causing an accident as follows. As a results, Should not be a once a month visits. Therefore should be changed at least twice a month to help prevent accidents of this system is to be judged.

PURPOSES: This study analyzed the lane-by-lane traffic flow characteristics in Korea by using real-world data, including congestion levels, for 2-, 3-, and 4-lane freeways. METHODS : On the basis of a literature review, lane flow and speed characteristics were analyzed using flow measurements and speed ratios. In addition, the effect of congestion levels on traffic flow were visualized using rescaled cumulative plots. RESULTS: Driver behavior varied depending on the congestion level. During free-flow conditions, the lane-use ratio of individual lanes varied largely, whereas during congestion, the ratio was nearly the same for all lanes (i.e., equilibrium). During maximum-flow and congestion conditions, the median lane was used more than the shoulder lane, whereas during all other conditions, the shoulder lane had a higher lane-use ratio. In 3- or 4-lane freeways, the lane-use ratio of the median lane always exceeded 1 and was the highest during free-flow conditions. CONCLUSIONS : The results of the present analysis can be used as an index to predict congestion before a lane is overcapacitated. Moreover, the results can be applied in variable lane guidance systems, such as car navigation systems and variable message displays, to control traffic flow.

Although the Hazen-Williams C factors are very important in the design, operation, and maintenance of water supply pipes, sufficient studies for them have been not reported in korea, which are based on experiments or measured data. Because of this, we have estimated C factors by measurement considering constraints in time precise safety diagnosis for multi-regional water supply system were performed. In this study, we confirmed constraints and variables characteristics of Hazen-Williams equation, and collected reliable C factors data of 174 by measurement, and analyzed their characteristics. According to collected data, the average value is 115.35, which is almost equal to the value of design standard or a little higher than it in korea. Also, among the equations suggested to determine C factor in the past, the C factors calculated by Sharp and Walski equation was closest to them in this study. In addition, to analyze collected C factors, use year and pipe diameter having high correlation with them were respectively divided into there categories. Analysis results showed that C factors evidently decreases depending on increases in use year, on the other hand, size of pipe diameter is proportional to value of them. In conclusion, this research showing evaluation and characteristics for C factors based on measured data will be used as practical reference in determining C factor in multi-regional water supply systems at a later date.

이 논문에서는 고속철도교량 설계를 위한 활하중 모델을 통계 및 확률적 방법으로 검토하고, 하중조합의 하중계수가 주는 안전율을 분석하였다. 이 연구는 철도교량 설계기준에 대한 한계상태설계법 개발의 일환이며, 이를 위하여 경부고속철도를 운행하는 열차를 대상으로 약 한달 동안 실측하여 데이터를 수집하고 분석하였다. 이 데이터를 대상으로 교량의 설계수명에 맞도록 4가지 통계 방법들을 적용하여 설계하중을 추정하여 비교․검토하였다. 또한, 철도교량의 설계하중조합이 주는 안전율을 검토하기 위하여 신뢰도지수를 구하고 이를 분석하였다. 실측 데이터로부터 추정한 활하중효과에 대하여, 현행 고속철도 설계활하중인 표준열차하중의 0.75배를 적용한 설계활하중 효과의 크기가 최소 30～22% 더 크게 나왔다. 신뢰도분석을 통하여, 극한한계상태만을 기준으로 본다면, 추가적인 하중계수 감소의 가능성이 있음을 알 수 있다.

The effect of weir construction (2009~2011) was investigated on algal bloom dynamics and surrounding conditions in the Youngsan River by analyzing the long-term (2001~2014) data provided by the Water Information System, Ministry of Environment. The data include chlorophyll a and water properties such as total suspended solids (TSS), ammonium (NH4 +), nitrate (NO3-), orthophosphate (PO43-), total nitrogen (TN), total phosphorus (TP) and DIN/DIP molar ratio collected from 12 stations along the channel of the river. Temporal variations were examined using data collected monthly from 2001~2014 and Box-Whisker plot was used to examine the difference in algal bloom dynamics between before (2006~2008) and after (2012~2014) the weir construction. Pearson’s correlation analysis was also used to analyze the correlation of parameters. The results showed that TSS affecting water turbidity increased during the construction but decreased especially at the stations located in the upper and middle regions of the river after the construction. Ammonium concentrations increased whereas the concentrations of other nutrients decreased after the construction inducing an increase in N:P molar ratio. Chlorophyll a decreased suddenly during the construction but increased clearly after the construction at the stations where TSS decreased. This indicates that algal blooms can develop in the Youngsan River due to a decrease in turbidity that increases light penetration in water column although the concentrations of nutrients such as orthophosphate were reduced after the weir construction.

Conventional data envelopment analysis (DEA) models require that inputs and outputs are given as crisp values. Very often, however, some of inputs and outputs are given as imprecise data where they are only known to lie within bounded intervals. While a typical approach to addressing this situation for optimization models such as DEA is to conduct sensitivity analysis, it provides only a limited ex-post measure against the data imprecision. Robust optimization provides a more effective ex-ante measure where the data imprecision is directly incorporated into the model. This study aims to apply robust optimization approach to DEA models with imprecise data. Based upon a recently developed robust optimization framework which allows a flexible adjustment of the level of conservatism, we propose two robust optimization DEA model formulations with imprecise data; multiplier and envelopment models. We demonstrate that the two models consider different risks regarding imprecise efficiency scores, and that the existing DEA models with imprecise data are special cases of the proposed models. We show that the robust optimization for the multiplier DEA model considers the risk that estimated efficiency scores exceed true values, while the one for the envelopment DEA model deals with the risk that estimated efficiency scores fall short of true values. We also show that efficiency scores stratified in terms of probabilistic bounds of constraint violations can be obtained from the proposed models. We finally illustrate the proposed approach using a sample data set and show how the results can be used for ranking DMUs.