Painting system are widely used to prevent corrosion damage The coating method on various corrosion preventive method was usually adopted for the functional ability and excellent appearance. In this study, to evaluate the deterioration curve of coating system for steel bridge, the combined cyclic corrosion test was conducted base on ISO 20340. The deterioration areas were measured depending on corrosion cycle. The deteriorations of newly-built coating were compared with those of re-coating.

Steel structures have been prevented from corrosion damage using by paint coating. The durability of paint coating can be changed by installed environment condition of steel structures. In this study, thus, deterioration test of paint coating was conducted for various environmental condition. Deterioration levels of paint coating specimens exposed by each artificial environment were examined from visual inspection.

Visual inspection has generally been applied to examine the coating deterioration. However, it was difficult to evaluate an anti-corrosion performance of paint film. In this study, thus, to quantitatively evaluate an anti-corrosion performance of paint film under various corrosion enviornent, change in the impedance paint coating was evauated using EIS (Electrochemical Impedance Spectroscopy).

Visual inspection has generally been applied to examine the coating deterioration. However, it was difficult to evaluate an anti-corrosion performance of paint film. In this study, thus, to quantitatively evaluate an anti-corrosion performance of paint film under various corrosion enviornent, change in the impedance paint coating was evauated using EIS (Electrochemical Impedance Spectroscopy).

In order to prepare the information needed to construct a reduction system for volatile organic compounds (VOCs) exhausted from ship-block paint-booths in a giant shipyard, VOCs in paint-shop airs were analyzed and compared to the components in paint thinners. Aromatic hydrocarbons containing eight and nine carbon atoms are known to be major VOC compounds found in shipyard paint-shops. The total hydrocarbon (THC(C7)) concentrations calibrated using toluene gas, were measured in block paint-shops with two photo-ionization detector (PID) meters, and the resulting THC(C7) data were converted to THC(C1) concentrations according to the Standard Methods for the Measurements of Air Pollution in South Korea. THC(C1) concentrations near the spray site ranged from 10 to 2,000 ppm, but they were less than 400 ppm near the walls of the paint-booth. The measurements of THC concentrations, based on the height of the monitoring sites, were related to the height of the target to which the spray paints were applied. The maximum concentrations occurred at almost the same height as the spray targets. When painted blocks had been dried-by warming with no spraying, the THC concentrations were 80~100 ppm.

In this study, degradation due to the durability of the coating to reduce the check for to determine the deterioration of the durability coating was in parallel to outdoor exposure test and the salt spray test on the marine environment. weatherability paint coating was electrochemical measured using EIS (Electrochemical Impedance Spectroscopy) to evaluate durability. The purpose of the study was to compare the reduced durability of the paint coating.

콘크리트 구조물의 내구성을 향상하기 위해 개발된 통기성이 개선된 나노합성 폴리머 표면처리제를 도포한 콘크리트의 내구성향 상 효과를 평가하기 위해 내부 구조와 공극량을 측정하였으며, 염분침투, 탄산화, 동결융해 및 화학적 침식 저항성에 대한 실험을 진행하여 기 존 표면처리제와 비교․분석하였다. 공극량과 내부 구조를 측정한 결과, 나노합성 폴리머 표면처리제를 도포한 콘크리트는 0.3㎛ 이상의 공극과 0.1㎛ 이하의 공극영역에서 세공량이 감소하는 경향을 보였으며, 전자현미경을 통한 촬영된 내부는 수화조직에 의해 치밀함을 보였다. 나노합 성 폴리머 표면처리제를 도포한 콘크리트의 염분침투 깊이는 무도포 콘크리트에 비해 약 92% 이상, 수성 에폭시 표면처리제를 도포한 콘크리 트보다도 약 70% 이상 감소하였다. 이는 탄산화, 동결융해 및 화학적 침식 저항성 실험에서도 비슷하게 나타났다. 특히 황산 5% 수용액에 침지 실험한 화학적 침식 저항성 실험에서는 침지 12일 이후 무도포 콘크리트와 수성 에폭시 표면처리제를 도포한 콘크리트에서 -4%의 중량감소를 보였지만, 나노합성 폴리머 표면처리제를 도포한 콘크리트는 -1.7%의 중량감소율을 보였으며, Tsivilis et al.에 의한 외관등급 조사법에서도 우 수한 결과를 보였다.

In this study, Impedence of bridge paint coating was measured using EIS(Electrochemical Impedance Spectroscopy) to evaluate durability of paint coating depeding on coating thickness. Thus, paint coating specimens with different paint thickness were used. From impedence mesearment, the durability of paint coating was compared.

The research measured cracks by visualizing them through mechano- luminescence(ML) paint. By applying M-L paint on the surface of the specimen and using the 3-point bending test. Through the results of this research, we confirmed the crack propagation speed by section and the mechanical correlation such as between loads and cracks and between deflection and cracks, which means this research was quite successful in analyzing the characteristics of cracks.

일반적으로 강재시설물에 사용되는 유기에폭시 도장의 경우, 일반적인 조건에서는 우수한 내구성을 보이고 있으나, 송/배전 시설물인 강재전력시설물과 같이 빛(자외선)이나 열에 노출되는 환경에서는 도막자체의 열화현상에 의한 피해가 더욱 심각하게 증가하고 있다. 본 연구의 목적은 무기계 액상 규산질을 기초로 한 강재용 도장제를 개발하는 것이다. 이를 위해 6가지 예비실험을 거쳐서 최적의 배합조건을 도출하였으며, 물리적 특성실험 및 내구성 실험을 수행하였다. 실험결과 개발된 무기계 도료는 현재의 유기계 도료의 성능을 확보하고 있었으며, 내화학성에 대한 저항성이 개선된다면, 강재 시설물의 대체 도료로 사용될 수 있으며, 그 적용성이 더욱 증가할 것으로 평가되었다.

국제해사기구-해양환경보호위원회 제 46차(외교회의 결정 2001년 10월 5일)회의에서 유기주석계 방오도료 사용금지(2003년 1월 1일 선체 사용금지, 2008년 1월 1일 선체 잔존금지)에 따른 TBT함유 페인트 폐기물의 다량 발생에 대한 처리기술의 개발로 방오 도료 페인트의 최적 처리시스템을 연구하였다. 열분해 반응장치를 이용하여 TBT함유 페인트 폐기물의 열분해 특성 및 처리성능을 평가하였다. TBT함유 페인트 폐기물을 열분해 반응조에서 온도를 1000℃, 반응시간을 1시간 동안 처리했을 때 유기주석이 99% 제거되어 처리효율이 뛰어났다.

Hull roughness due to corrosions of outer hull and had applications on outer hull paints was analyzed theoretically. It's value which was gainable practically, was studied, and estimated power penalty formular correspon-ding to that value were reviewed. Local roughness penalty and roughness texture penalty that paint manahers in ship yard can easily were compared and studied by dotting actual ships in the issued curves. Losses and benifits of hull roughness & the specification choise of A/F paint which managers of ship maintenance were much interested in have been calculated through actual ships. The paper is illustrating that how much the specification choise and managing of A/F paint have effects on fuel consumption of ship in program. It is urgently required that recent developed antifouling paints of new A/F generation should be adopted to new ship building by big shipping companies in view of the environmental protection and the economical maintenance of ships.