In mechanical testing of W-Ni-Pe heavy alloys, the cracks nucleate at W/W interface and propagate through W/ Imatrix interface or through matrix phase together with the cleavage of W grains. The mechanical properties can therefore be improved by control of the interfacial strength and area. In this presentation, some experimental result and techniques on this subject will be reviewed and discussed. The hydrogen embrittlement caused by the hydrogen segregation at interfaces during sintering in an hydrogen atmosphere can be removed by an heat-treattnent in vacuum or in an inert atmosphere. The heat-treatment condition can be estimated by using a diffusion equation for a cylindrical shape. The mechanical properties, in particular the impact property, are degraded by the segregation of non-metallic impurities, such as Sand P. The degradation can be prevented by adding a fourth element, such as La or Ca, active with the non-metallic impurities. The cyclic heat-treatment at usual heat-treattnent tempemture causes the penetration of matrix between W/W grain boundaries and results in remarkable increase in impact energy. This is due to an increase in the area of ductile failure during the impact test. The instability of W/matrix interface casued by addition of Mo or Re can be controlled by using W powders of different size. The increase in the interfacial area in found to be related to the presence of non-equilibrium pure W gmins among W(Mo or Re) solid solution gmins.

Mossbauer 분광법으로 비정질 Fe32Ni36Cr14P12B6의 자기적 성질을 연구하였다. 88K의 스펙트럼 분석에 의하면 초미세 자기장의 값은 140.5kOe이며 사중극자 분열은 거의 0의 값을 같는데 이는 초미세 자기장이 전기장 기울기 주축에 대해서 무질서하게 나열함을 의미한다. 시료의 Tc는 280K이고 상자성 온도 영역에서는 사중극자 분열값은 온도에 무관하게 거의 일정한 값을 나타냈다. 되튐없는 확률로부터 시료의 Debye특성 온도 288K를 얻었다.

상업적으로 HTS (High Temperature Shift reaction) 반응에서 사용되는 Fe2O3/Cr2O3 촉매는 사용 후 6가 크롬 (Cr6+)의 침출에 따른 환경적/인체적 문제를 일으킬 수 있는 잠재성을 가지고 있어 친환경 크롬-프리 촉매개발을 위한 연구가 활발히 진행되고 있다. 본 연구에서는 크롬을 사용하지 않고 우수한 성능을 나타낼 수 있는 Fe/Al, Fe/Al/Cu, 그리고, Fe/Al/Ni 촉매를 제조하고 성능을 비교 평가하였다. 단계함침법으로 금속산화물(Cu와 Ni)과 알루미늄이 함유된 Fe계 촉매를 제조하고 촉매반응장치를 이용하여 각 촉매의 활성을 분석하였다. 그 결과 Fe/Al/Cu 촉매는 가혹한 조건(COconc. = 38.2%; 천연가스 대비 약 5.7 배 높은 CO 농도)에서도 탁월한 성능(XCO = 84.3% at 400 ℃)을 나타내었다. 이 결과는 Fe/Al/Cu 촉매의 강한 환원력과 활성종인 Fe3O4의 높은 열적 안정성에 기인한 것으로 확인되었다. 또한 강한 소결 저항성을 가진 Fe/Al/Cu 촉매는 400°C에서 100시간 동안 뚜렷한 비활성화를 보이지 않아 높은 안정성을 지닌 것으로 확인되었다.

The aim of this study is to evaluate the environmental impacts of recovery of valuable metals from the desulfurizing spent catalyst. Molybdenum, vanadium and nickel widely used in the area of catalysis. But the demand of these metals is full filled by industries. Every year, more than 18,000 tons spent catalysts are discarded. In most countries, spent catalyst is classified as a harmful waste. Thus, metal recovery from spent catalyst has been processed. The recovery process of molybdenum, vanadium and nickel from spent catalyst was mainly carried out wet process. However, this process are not suitable for economics and environmental aspects. Because environmental costs for removal of sulfur in the spent catalyst is high and huge amount of industrial wastewater occurs. Thus, it is necessary to develop a process which is efficient and does not cause pollution than the wet process. Thus, we have studied life cycle assessment about the dry process for the recovery of valuable metals.