The purpose of this study is to research into which characteristic is shown according to a change in filler metal in case of CO2 gas arc welding by using Automobile Structural Steel(ATOS80). The major characteristics of this study were experimented by having Bevel angle as 50°, Root gap as 3mm, Filler metal as Solid wire & Flux wire, and the projected length of wire as 15mm. This study made the welded test specimens for the KS specification in advance suitably for the conditions, thereby having comparatively analyzed with the data value that was obtained through tensile test, hardness test, impact test and Macro Structure Detecting. Arranging the results that analyzed finally, the tensile strength and the hardness appeared to be excellent in case of welding with flux wire. The impact strength was indicated to be superior in case of welding with solid wire.

To conduct a nuclear fuel irradiation test, the inside of the nuclear fuel rod must be assembled along with the test fuel, several different parts, and sensors, and then filled with high-pressure and high-purityhelium gas. Therefore, it is necessary to develop helium gas filling techniques that can achieve exact TIG (Tungsten Inert Gas) spot welding at a pin-hole of the nuclear fuel rod to fill helium gas into the nuclear fuel test rod. However, previous apparatuses do not have repeatability for TIG spot welding as they lack an electrode position control jig to exactly fix a TIG electrode in a high-pressure chamber, and they consume a large amount of helium gas. Therefore, a TIG spot welding apparatus was developed to easily and accurately conduct TIG spot welding and significantly reduce the gas consumption. In addition, the optimum welding conditions of this welding apparatus were established through various weld tests.

Gas welding is a very important and useful technology in the fabrication of railroad cars and commercial vehicle structures. However, since the fatigue strength of gas-welded joints is considerably lower than that of the parent material due to stress concentration at the weld, the fatigue-strength assessment of gas-welded joints is very important for the reliability and durability of railroad cars and the establishment of a criterion for long-life fatigue design. In this paper, in order to save time and cost for the fatigue design, an accelerated life-prediction method that is based on the theory of statistical reliability was investigated. Its usefulness was verified by comparing the (Δσa)R-Nf relationship that was obtained from actual fatigue test results with the (Δσa)R-(Nf)ALP relationship that was derived from accelerated life testing. And the reliability of the predicted life was evaluated. The reliability of the accelerated life-prediction on the base of actual test data was analyzed to be (81～86)% of the actual test life of the fillet-type gas welded joint.

Stainless steel sheets are widely used as the structure material for the railroad cars and the commercial vehicles. These kinds structures used stainless steel sheets are commonly fabricated by using the gas welding. For fatigue design of gas welded joints such as fillet and plug and ring type joint, it is important to obtain optimum design parameter information on gas welded joints. In this paper, analysis approach for fatigue test using experimental design are evaluated optimum factor in gas welded joint type and geometrical parameters of materials. Using these results, that factors applied to fundamental information for fatigue design.