이 연구는 유기농 식물성 계면활성제의 화장품 가용화력에 관한 연구이다. 유기농으로 인증된 원료를 사용하여 고순도의 폴리글리세릴-10올리에이트와 폴리글리세릴-10스테아레이트를 합성하여 우수한 가용화력을 가진 계면활성제를 개발하였다. 이 혼합원료의 이름을 Solubil ORG-1300으로 칭하였다. 이 원료의 외관은 엷은 노란색의 페이스트이었고, 특이한 고유의 냄새를 가지고 있었다. 비중은 1.15, 산가는 0.072±0.1로 순도가 높았다. 이 계면활성제의 HLB값은 평균값=15.1로 Griffin식을 사용 하여 계산하였다. 유기농 가용화제가 향과 오일을 어떻게 가용화되는가를 메커니즘적으로 해석하였다. 가용화 실험은 두 가지 오일에 대하여 성능실험을 통하여 육안으로 판별하고 UV분광광도계로 890nm에서 투과도를 측정하여 투명도를 평가하였다. 이 결과 베르가못오일을 가용화하는데 필요한 계면활성제의 농도는 약 2배정도가 필요한 것으로 나타났다. 또한 토코페릴아세테이트를 가용화하는데 필요한 계면활성제의 농도는 약 8배정도가 필요한 것으로 나타났다. pH변화에 따른 가용화력을 실험한 결과 pH=3.5의 산성영역, pH=7.2의 중성영역, pH=11.5의 알칼리성영역에서도 안정화된 가용화력을 보였다. 화장품의 응용분야로써 보습스킨토너 처방을 성공적으로 개발하였다. 이러한 결과를 바탕으로 스킨케어, 베이비 로션, 민감성 혹은 아토피 피부용 화장품에 폭넓게 응용이 가능할 것으로 기대한다.

본 연구에서는 지방 알코올을 이용하여 탄소 길이에 따른 술폰산계 음이온 계면활성제를 합성하였으며, 합성한 계면활성제들의 구조를 FT-IR과 1H NMR 분석을 통하여 확인하였다. 음이온 계면활성제의 임계미셀농도(critical micelle concentration: cmc)는 10-5∼10-3mol/L이며, 임계미셀농도에서의 표면장력 값은 26∼32 mN/m이었다. 합성한 술폰산계 계면활성제의 분자당 최소 영역값은 1.68∼1.30nm2이다. 음이온 계면활성제의 분자당 최소 영역이 감소하였다. 합성한 계면활성제의 물성은 임계미셀농도, 기포력, 유화력, 접촉각을 측정하였다.

Bi2Te3 powders are recovered by wet chemical reduction for waste n-type thermoelectric chips, and the recovered particles with different morphologies are prepared using various surfactants such as cetyltrimethylammonium bromide (CTAB), sodium dodecylbenzenesulfonate (SDBS), and ethylenediaminetetraacetic acid (EDTA). When citric acid is added as the surfactant, the shape of the aggregated particles shows no distinctive features. On the other hand, rod-shaped particles are formed in the sample with CTAB, and sheet-like particles are synthesized with the addition of SDBS. Further, particles with a tripod shape are observed when EDTA is added as the surfactant. The growth mechanism of the particle shapes depending on the surfactant is investigated, with a focus on the nucleation and growth phenomena. These results help to elucidate the intrinsic formation mechanism of the rod, plate, and tripod structures of the Bi2Te3 recovered by the wet reduction process.

양이온 계면활성제는 살균력을 가지고 있으며 이를 개발하기 위한 연구는 다양한 산업분야에 서 계속 진행되고 있다. 단순히 우수한 성능을 가질 뿐만 아니라 생분해성이 우수한 계면활성제를 개발 하기 위한 연구는 증가되고 있다. 본 연구에서는 Michael addition 반응을 통하여 ester-type의 양이온 계면활성제를 합성하였다. 실온에서 촉매없이 alkyl acrylate와 1차 아민을 가지는 화합물을 합성한 뒤 dimethyl sulfate 로 4차화시킨다. 2개의 소수기와 한 개의 친수기를 갖는 HQ21과 2개의 소수기와 2개 의 친수기를 갖는 HQ22를 합성하였다. 이들 합성화합물은 1H-NMR, HR-MS 와 FT-IR로 구조를 확인하였으며 생분해성을 측정하였다.

금속산화물 반도체 중 하나인 산화아연은 인체에 무해하고 친환경적이며, 우수한 화학적, 열 적 안정성의 특성을 지니며 3.37 eV의 넓은 밴드갭 에너지와 60 meV의 높은 엑시톤 바인딩 에너지로 인해 태양전지, 염료페기물의 분해, 가스센서 등 다양한 분야에 응용이 가능한 물질이다. 산화아연은 입 자 형상 및 결정성의 변화에 따라 광촉매 활성이 변하게 된다. 따라서, 다양한 실험변수와 첨가제를 사 용하여 입자를 합성하는 것이 매우 중요하다. 본 논문에서는 마이크로파 수열합성법을 사용하여 산화아연을 합성하였다. 전구체로는 질산아연을 사 용하였고, 수산화나트륨을 사용하여 용액의 pH를 11로 조정하였다. 첨가제로는 계면활성제인 에탄올아 민, 세틸트리메틸암모늄브로마이드, 소듐도데실설페이트, 솔비탄모노올레이트를 첨가하였다. 합성된 입자 는 별모양, 원추형, 씨드형태, 박막형태의 구형의 형상을 보였다. 합성된 산화아연의 물리・화학적 특성 은 XRD, SEM, TGA을 통하여 확인하였고, 광학적 특성은 UV-vis spectroscopy, PL spectroscopy, Raman spectroscopy으로 확인하였다.

We report on an all-solution-processed hydrothermal method to control the morphology of ZnO nanostructures on Si substrates from three-dimensional hemispherical structures to two-dimensional thin film layers, by controlling the seed layer and the molar contents of surfactants during their primary growth. The size and the density of the seed layer, which is composed of ZnO nanodots, change with variation in the solute concentration. The ZnO nanodots act as heterogeneous nucleation sites for the main ZnO nanostructures. When the seed layer concentration is increased, the ZnO nanostructures change from a hemispherical shape to a thin film structure, formed by densely packed ZnO hemispheres. In addition, the morphology of the ZnO layer is systematically controlled by using trisodium citrate, which acts as a surfactant to enhance the lateral growth of ZnO crystals rather than a preferential one-dimensional growth along the c-direction. X-ray diffraction and energy dispersive X-ray spectroscopy results reveal that the ZnO structure is wurtzite and did not incorporate any impurities from the surfactants used in this study.

비이온계면활성제 가운데 솔비톨계 계면활성제인 Span을 이용해 수열합성법으로 수산화마그네슘을 합성하였다. 수산화마그네슘 합성의 전구체는 염화마그네슘과 수산화나트륨을 사용하였다. 비이온 계면활성제는 안정제와 분산제 그리고 표면 개질제로 적용하였다. 비이온 계면활성제를 첨가하였을 경우 수산화마그네슘 입자는 좀 더 작고 균일한 크기와 좋은 분산성을 나타내었으며, 소수성 성질을 나타내었다. 합성된 입자의 특성은 PSA, SEM, EDS, XRD 그리고 FT-IR을 통해 확인하였다. 기기 분석을 통해 개질 전과 후의 수산화마그네슘의 소수성, 분산성 특성을 비교하였다. 또한 실험조건에 따라 수산화마그네슘 입자의 표면 개질 특성 변화를 확인하였다.

양이온 에스테르형 계면활성제인 N-2-hydroxy-3-(2-hydroxyacetoxy)proply-N,N-dimethyl dodecylaminium chloride (HPDA)를 합성하였고, FT-IR 과 ¹H-NMR 분석으로 확인하였다. 합성화합물의 묽은 수용액에 대하여 표면장력을 측정하고, 임계미셀농도를 산정하였다. 표면장력은 10-³∼10-² mol/L 농도 범위에서 33～34 dyne/cm 이었고, 표면장력법에 의해 산정한 임계미셀농도는 8.5 ×10-³ mol/L 이었다. 합성 계면활성제인 HPDA와 SLS, TTAB의 유화특성을 시험하였다. 그 결과 HPDA가 우수한 유화제로 확인되었다. 그리고 Ross-Miles 방법으로 기포력과 기포안정성도 측정하였다.

Gemini type of cationic surfactant, namely α,ω-alkane-bis(N-lauroyloxyethyl -N,N-dimethyl)-diammonium bromide was synthesized and confirmed by FT-IR and 1H-NMR spectroscopy. Their inhibition effect on corrosion of mild steel in 1 M HCl solution was tested by weight loss method. Surface tensions were measured by surface tensiometer Sigma 70. Their c.m.c. values evaluated by surface tension method was 4.01×10-5∼ 4.99×10-5 mol/L. The Krafft point of the these surfactants were < 0 ℃. The emulsifying properties of synthesized cationic gemini surfactants and sodium dodecyl sulfate (SDS), tetradecyl trimethyl ammonium bromide (TTAB) was investigated. Of these, α,ω-alkane-bis(N-lauroyloxyethyl-N,N-dimethyl)- diammonium bromide has been confirmed as a good emulsifier. The inhibition efficiency increases by increasing cationic gemini surfactant concentration. As a result, these surfactants are expected to be applied as corrosion inhibitors.

N,N,N-Trimethyl-10-nitrophenoxy decylammonium bromide (N10TAB) and N,N,N,N-Tetramethyl-bis-〔10-nitrophenoxy decyl〕-1,6-hexanediammonium dibromide (N10-6-10N), bearing aromatic nitrophenoxy group in the end of their hydrophobic chains have been prepared, and their properties in aqueous solutions have been studied by conductivity and H-NMR spectroscopy. Below the critical micelle concentration N10-6-10N form premicelle with two or three surfactant molecules. Beyond the critical micelle concentration two molecules have strong self-aggregation ability and form micelles of rather small size and with small aggregation numbers. H-NMR at different concentrations give the informations on the environmental changes of the surfactants on their micellization progress.

이 연구는 글리시딜 숙시네이트 양이온 제미니 계면활성제의 합성에 관한 것이다. 제미니 계면활성제는 2-메틸 디소디움 숙시네이트와 에피클로로히드린, N, N-디메틸 도데실 아민을 사용하여 합성하였다. FT-IR과 1H-NMR을 통해 물성을 확인하였다. 표면장력과 cmc 측정, 유화력 및 기포력을 각각 주어진 조건을 이용하여 측정하였다. 제미니 계면활성제의 표면장력은 33~34 dyne/cm이며 cmc 값은 10-4~10-3mol/L 였다. 제미니 계면활성제의 유화력은 유기용매에서 더 우수하였고 기포력이 안정한 것을 확인하였다.

Cationic gemini-surfactant, namely 1,4-butane-bis(N-alkanoyloxyethyl-N,Ndimethyl)-diammonium bromide was synthesized and their inhibition effect on corrosion of mild steel in 1 M HCl solution was tested by weight loss method. The synthesized product was confirmed by FT-IR and 1H-NMR spectroscopy. Surface tensions were measured by surface tensiometer Sigma 70. Their c.m.c. values evaluated by surface tension method was 4.1×10-5~5.4×10-5 mol/L. The Krafft point of the these surfactants were 〈0~10.7℃. The emulsifying properties of synthesized cationic gemini surfactants and sodium dodecyl sulfate (SDS), tetradecyl trimethyl ammonium bromide (TTAB) was investigated. Of these, 1,4-butane-bis(N-lauroyloxyethyl-N,N-dimethyl)- diammonium bromide, CGL 14-4-14 has been confirmed as a good emulsifier. The inhibition efficiency increases by increasing cationic gemini surfactant concentration. As a result, these surfactants are expected to be applied as corrosion inhibitors.

Core-Shell polymers of silicone dioxide-styrene system were prepared by sequential emulsion polymerization. In inorganic/organic Core-Shell composite particle polymerization, silicone dioxide adsorbed by surfactant sodium dioctyl sulfosuccinate (EU-DO133L) was prepared initially and then core silicone dioxide was encapsulated emulsion by sequential emulsion polymerization using styrene at the addition of potassium persulfate (KPS) as an initiator. We found that SiO2 core shell of SiO2/styrene structure was formed when polymerization of styrene was conducted on the surface of SiO2 particles, and the concentration sodium dioctyl sulfosuccinate (EU-DO133L) was 0.5~2.0g. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by scanning electron microscope(SEM).

Silicone dioxide absorbed polyoxyethylene alkylether sulfate (EU-S75D) surfactant was prepared. The core-shell composite of inorganic/organic were polymerized by using styrene(St) as a shell monomer and potassium persulfate(KPS) as an initiator. We studied the effect of surfactants on the core-shell structure of silicone dioxide/styrene in the presence of an anionic surfactant lauryl sulfate(SLS). The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer(TGA) and morphology of latex by scanning electron microscope(SEM).

Silicone surfactants are widely used in many industrial area because of its thermal stability and lower foaming property. But it has limitation to expand the application because of migration and bubble generation issues when it is mixed with organic surfactant. In this study, epoxy functionalized fluoro-silicone surfactant, perfluoro glycidoxypropyl polyether siloxane(PFGES), was synthesized using hydrosilylation reaction among perfluoro methyl hydrogen siloxane, allyl glycidyl ether, and allyl ployether in order to get lower surface tension, better thermal stability than conventional silicone surfactant, and reactivity with anhydride function.

Titanium dioxide particles are used as photocatalysts, sensors, adsorbents and catalyst. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 0.5~2.0 wt% EU-S133D, Titanium dioxide / Acrylate core-shell polymerization was carried out on the surface of Titanium dioxide particle without forming the new Titanium dioxide particle during acrylate shell polymerized in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer(TGA) and morphology of latex by scanning electron microscope(SEM).

Silicone dioxide absorbed polyoxyethylene alkylether sulfate (EU-S133D) surfactant was prepared. Core-shell polymers of inorganic/organic pair, which have both core and shell component, were synthesized by sequential emulsion polymerization using Acrylate as a shell monomer and potassium persulfate (KPS) as an initiator. We found that when Acrylate core prepared by adding 2.0 wt% EU-S133D, silicone dioxide/Acrylate core-shell polymerization was carried out on the surface of silicone dioxide particle without forming the new silicone dioxide particle during acrylate shell polymerization in the inorganic/organic core-shell polymer preparation. The structure of core-shell polymer were investigated by measuring to the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of latex by scanning electron microscope(SEM).

The inorganic-organic composite particles with core-shell structure were polymerized by using styrene and potassium persulfate (KPS) as a shell monomer and an initiator, respectively. We studied the effect of surfactants on the core-shell structure of silicone dioxide/styrene composite particles polymerized in the presence of sodium dodecyl sulfate(SDS), polyoxyethylene alkylether sulfate (EU-S133D), and at none surfactant condition. We found that SiO2 core / polystyrene(PS) shell structure was formed when polymerization of styrene was conducted on the surface of SiO2 particles, and the concentration SDS and EU-Sl33D was 8.34×10-2mole/L. The core-shell structure was confirmed by measuring the thermal decomposition of the polymer composite using thermogravimetric analyzer (TGA), and the morphology of the composite particles was characterized by transmission electron microscope (TEM).

The core-shell composite particles of inorganic/organic were polymerized by using styrene(St) as a shell monomer and potassium persulfate (KPS) as an initiator. We studied the effect of core-shell structure of silicone dioxide/styrene in the presence of an anionic surfactant sodium lauryl sulfate (SLS) and polyoxyethylene alky lether sulfate (EU-S133D). We found that when SiO2 core/PSt shell polymerization was prepared on the surface SiO2 particle, to minimize the coagulation during the shell polymerization, the optimum conditions were at concentration of 2.56×10-2mole/L SLS. The structure of core-shell polymer was confirmed by measuring the thermal decomposition of polymer composite using thermogravimetric analyzer and morphology of core-shell polymer particles by transmission electron microscope (TEM).