In this study, an effervescent atomizer capable of mixing and spraying vegetable oil and kerosene at the same time was proposed to examine the usefulness of vegetable oil and kerosene in terms of recycling of renewable energy and waste resources. The effect of nozzle exit diameter variation on the atomization characteristics such as spray angle, droplet size distribution, cumulative volume distribution, and SMD was investigated using LDPA. The results of this study showed that the spray angles decreased with increasing ALR at the same nozzle exit diameter and increased with increasing nozzle exit diameter under the same ALR condition. SMD was decreased with increasing ALR at all nozzle exit diameters, and SMD was decreased with decreasing nozzle exit diameter even under the same ALR conditions. Also, the droplet was more finely atomized when the nozzle exit diameter is reduced under the same ALR conditions and when the ALR is increased at the same nozzle exit diameter, but the uniformity of the droplets was lowered because the droplet with a larger diameter existed.

In order to apply rotary atomizer to agricultural spraying system, the motor direct coupled rotary atomizer was proposed. The effect of operating conditions such as atomizing air flow rate, working fluid flow rate, and rotation speed of spinning cup on the atomization performance was investigated for the proposed direct coupled rotary atomizer. The motor speed was controlled in the range of 6,000 to 12,000 rpm using an alternating current transformer, and the atomizing air was supplied by the compressor. In this study, LDPA was used to analyze the spray characteristics of the rotary atomizer. The representative particle diameters of D10, SMD, MMD, D90, and DMax tended to decrease as the atomizing air flow rate and the motor speed increased, but increased as the working fluid flow rate increased. Also, SMD was found to be influenced by order of atomizing air flow rate> motor speed> working fluid flow rate, and DMax was influenced by order of operating fluid supply> motor speed> atomizing air flow rate.

Ink-jet printing techniques with ceramic ink, which contains ceramic pigments as colorant, are in increasingly use in the ceramic industry. Generally, ceramic pigments that are produced by conventional method show diameters of several micrometers; these micrometer sized particles in the ink-jet printing process can cause undesirable behavior such as print head nozzle clogging. To prevent this problem, a particle size reduction process is required. In this study, CMYK (cyan, magenta, yellow, black) pigments were synthesized via solid state method. Each pigment particle was milled to submicron size by an attrition mill. The effects of micronizing on the morphology, mechanical property, crystal structure and color property of the CMYK ceramic pigments were investigated by field emission scanning electron microscopy (FE-SEM), particle size analysis (PSA), X-ray diffraction (XRD) and CIE L*a*b*.

An experimental study was conducted to investigate the atomization characteristics of spray from the effervescent atomizer, which has separated two aerator tubes. The atomization characteristics were examined through the influence of ALR and the changes of atomizer geometry such as nozzle orifice diameter, diffusion angle, mixing chamber volume. PDPA(Phase Doppler Particle Analyzer) was used to evaluate the atomization characteristics. During the experiments, the mass flow rate of liquid was kept constant at 2.8g/s and the mass flow rate of atomizing air was changed from 0.2 to 0.6g/s. Experimental results showed that SMD was not a linear function of ALR. While SMD is very sensitive to the changes of ALR, the changes of atomizer geometry had little effect on droplet mean diameter. As the effervescent atomizer with separated two aerator tubes is insensitive to the changes of atomizer geometry, it is expected that the effervescent atomizer with separated two aerator tubes is capable of requirements of many applications, without the drawbacks of atomization characteristics.