The purpose of this study was to comprehend the procurement system of iron materials and the production process of ironwork in royal tombs constructions in the later Joseon period. For this purpose, sixteen Sanneung-uigwes were analyzed. The following conclusions have been reached through the study. First, it was procuring five types of iron materials in constructions of royal tombs. Sincheol had been supplied up to the mid- 18th century. On the other hand, the amount of jeongcheol was increased rapidly. Because of the procurement system of initial tools was changed from bokjeong(a kind of tribute) to self-production in the Noyaso. Second, the government stockpiles were utilized as much as possible than bokjeong to manage the limited construction period and sudden construction start. Third, before moving the site of tombs, the melting furnace was installed in the Gungisi(armament factory). The amount of the melting furnace was increased from 5 to 8 since producing the initial tools in the Noyaso. Fourth, six kinds of master artisans were worked in the field of producing ironwork. Metal worker was assigned to one person per melting furnace. Fifth, the quality of final iron materials was controlled by use. Since the 19th century, it had been produced enhanced ironwork.

Since the 1970's, UNESCO and ICOMOS have adopted or emphasized on the principles of historic preservation. One of them is what to require a repair should not be repaired beyond the limits of the features and techniques which had been adopted in those days of establishment. On the premise, this paper is to examine the materials and technique of wall plaster work in the government building constructions in the Joseon dynasty. The result of this examination shall come up with a basic conformity in the case of repairing the building established in the late of Joseon dynasty. This paper is carried out for the proper repair and restoration of architectural cultural properties. Construction reports and other documents in those days are examined for the study. Following conclusions have been reached through the study. The materials and technique which applied to wall plaster work in those days were quite different from the present. The technique that was used to wall plaster of government buildings in those days was not a lime wall plaster, but sand coat one. The kinds of material for setting of the sand coat wall plaster had been revised with the change of the times or constructions. The main kinds of material were composed of sand, white clay, paper fiber, and cereal starch. However, the present materials were composed of sand, white clay. Therefore, the present materials and technique which applied to wall plaster work for the repair and restoration of architectural cultural properties have to be revised and corrected.

This thesis mainly deals with what is the Gurodae, recorded on the YeonggeonUigwe and the SanleungUigwe. Gurodae makes diverse appearance In Uigwes.(久老代, 仇老代, 求路代, 仇老臺, 仇露臺, 求露臺, 仇累臺, 九累臺) It seems that Gurodae was an architectural member used on the roof. Especially that was a member of the eaves. Gurodae looks like a Pyeonggodae, located on the end of the rafters. But it differs in the shape compare to that of Pyeonggodae. Gurodae has the shape of combined members, Pyeonggodae and Chakgo. Chakgo is a member covering the space, between two Buyeons So Gurodae has the shape of prominence and depression. The result obtained by surveying the Uigwes is the Gurodae used until 1789. After the publication of HyeonlyungwonUigwe in 1789, that member was no longer existed on the other Uigwes. In 1794, the year making Hwaseong fortress, Gurodae divided into two members, Chopyeonggodae and Chakgo. Since then Chopyeonggodae and Chakgo never combined again.

Architectural Drawing has been settled down the very effective means of exchanging their architectural ideas and data on the construction process. However, it was not easy to conserve the original drawings, which aims had been accomplished, at the same time, building was built. The same phenomena were occurred in our traditional architectural construction project, especially before pre-modern age. And do not understand soundly building documentation accepted by craftsmen in the period of earliest Chosun dynasty and how to present their idea and information of architectural as means of sketches and drawings. So, this paper aimed to clarify the drawing occurrence and the development steps of their rendering, representation methodology in the construction process in Sannungdogam-Uuigue, which were the construction documents of government based on the royal family's tomb and building projects in the late Chosun Dynasty. There are three development stages of architectural space representation, pre-drawing stage, drawing occurring stage and drawing settlement stage, They had been adapted unique drawing presentation method which were drawn by artisan, so called Doseol(圖說)and Painter Hwawon(畵員) The results are 1. In the Pre-drawing stage, they had been used the systematic explanation method of character 2. Do not have the evidence of adapting drawing before 17th centry, it was originated in early 17's century started with Onga(甕家). Onga's Drawing was drawn very elementary skill, and became development, settlement and standardization of their drawing representation around 19th century 3. The drawing presented by client's recognition view of space and building, integrated data within a sheet of drawing with practical and hierarchy and using graphic and description.