Copper alloy metal fiber was incorporated into the conventional water-soluble metal working fluids to increase the antimicrobial activity. Fluid treated by copper alloy metal fiber is shown that bacteria is disappeared whereas that untreated metal fiber is increased bacteria as increasing the life time. When the electrochemical potential of Cu/Zn ion is -268mV, radicals with molecular oxygen are easily made. Especially, hydroperoxide radical shows strong toxicity to the strains, leading to the conformational change of plasma membrane. As a result antimicrobial activity of copper alloy metal fiber in metal working fluid is superior to that of copper fiber.

This study is focused on the possibility of copper alloy metal fiber for an antimicrobial activity in the water soluble metal working fluids. Electrochemical potential of Cu/Zn ion is -268mV, and easily makes radicals with molecular oxygen. Especially, hydroperoxide radical shows strong toxicity to the strains. Plasma membrane causes conformational change when hydroperoxide radical binds to plasma membrane. Elution of copper ion from copper alloy metal fiber is detected in metal working fluid. As a result antimicrobial activity of copper alloy metal fiber in metal working fluid is superior to that of copper fiber.

우리나라 경제의 성장을 이끈 기계산업은 2015년 현재 생산액 100조원, 사업체수 9,526개사, 종사자수 31만 5천명, 부가가치 39조원으로써 제조업 중 생산액 5위, 사업체수 2위, 종사자수 3위, 부가가치 4위에 위치하고 있다. 이러한 기계산업에 있어 공작기계를 이용해 금속을 원하는 모양으로 만드는 금속가공은 반드시 필요한 공정으로 금속가공 시 가공 장비의 수명 연장 및 가공물의 품질 향상을 위해 칩이 형성되는 영역에 적용되어 윤활 및 냉각작용을 하는 절삭유(Soluble Cutting Fluids, SCF)가 이용되고 있다. 절삭유는 수용성 및 비수용성으로 나뉘는데 비수용성 절삭유의 경우 윤활성은 우수하나 경제성 및 발연, 발화등의 문제점이 있으며, 수용성 절삭유는 윤활성은 비교적 떨어지나 냉각성과 경제성이 우수하다는 장점이 있다. 또한 절삭유는 기능 향상을 위해 PAH, 방부제, 파라핀계 염소, 아질산염 등 20~30개의 첨가제가 사용된다. 이는 중추신경계 장애, 이비인후 자극, 피부염 발생 등을 일으킬 위험성이 크다고 알려져 있으며, 고농도의 유기성분 및 질소화합물로 인해 수계에 유출시 부영양화, 녹조현상 등과 같은 문제를 일으킬 수 있다. 따라서 본 연구에서는 전기화학적 처리를 통해 반응시간에 따른 폐수용성 절삭유의 COD 및 T-N의 제거율 변화를 분석하였다. 전기화학적 처리의 중요 인자인 전극은 비교적 가격이 저렴하고 용출량이 낮은 것으로 알려져 있는 SUS316전극을 이용하였으며 자세한 실험 조건을 Table 1에, 연구에 사용한 장치의 모식도를 Fig. 1에 나타내었다.

Waste water-soluble cutting oil was treated with W1 type #1 and W1 type #2. The properties of the original water-soluble cutting oil were pH=10.4, viscosity=1.4cP, CODcr=44,750 ppm, and TOC=10,569 ppm. However, the properties of the oil used for more than 3 months were changed to pH=7.82, viscosity=2.1cP, CODcr=151,000 ppm, and TOC=74,556 ppm. It might be attributed to the fact that molecular chains were cut due to thermal oxidation and impurities such as metal chips were incorporated in to the oil during the operation processes. To prevent the putrefaction of oil, the sterilization effect of ozone and UV on the microorganism in the oil was investigated. Ozone treatment showed that 99.99% of the microorganism was annihilated with 30 minutes contact time and 60 minutes were necessary for the same effect when UV was used. Ozone treatment could cut molecular chains of the oil due to strong sterilization power, which was evidenced by the increase of TOC from 25,132 ppm at instantaneous contact to 28,888 ppm at 30 minutes contact time. However, UV treatment didn't show severe changes in TOC values and thus, seemed to cause of severe cut of molecular chains. When the activated carbon was used to treat the waste water-soluble cutting oil, TOC decreased to 25,417 ppm with 0.1g carbon and to 15,946 ppm with 5.0g carbon. This results indicated that the waste oil of small molecular chains could be eliminated by adsorption. From the results, it could be concluded that these treatment techniques could be proposed to remove the waste oil of small molecular chains resulting in the degradation of the oil properties. In addition, these experimental results could be used for the correlation with future works such as investigation of the molecular distribution according to the sizes, lengths, and molecular weight of the chains.