The most important role of air defense system is to attack the air target of enemy to defend the important military unit or facilities. In order to attack the target as soon as it is detected, fast and precise fire signal transfer using the fire control stick is very important. However, it was found that firing is not conducted in the test for fire control stick. In order to find the reason of such problem and improve life cycle of fire control stick, the test was conducted and it was found that chattering occurred and this led to malfunction of signal transfer from control stick to fire control unit of air defense system. In order to draw resolution for this problem, two contact plate made of beryllium copper is suggested to add to the control stick to enhance the contact and reduce chattering effect. The four fire switch prototypes were tested for 100,000 times and it showed its reliability of use.

This study aims to investigate test-retest reliability or reproducibility of the paper-pencil test for investigating stereotypes of seven principal controls of passenger cars. The controls include wiper, head light, high beam, door window, ignition key, door key and door lock. Sixty two college-aged students participated in the paper-pencil tests and the tests were conducted twice with an in-between period of 4 weeks. The results showed that the stereotypes of motion-directions for the seven controls by the two paper-pencil tests were the same, and that the percentage agreements between two tests by subjects were ranged from 60.0% to 80.6%. There was a weak linear relationship between averaged rates of responses for the stereotypes of motion-directions for the seven controls and percentage agreements by subjects. Based on these results, it is concluded that the paper-pencil test collects reliable or reproducible data on the stereotypes of motion-directions for passenger cars’ controls within four weeks.

The purposes of this study are to survey stereotypes of control-display relationships for seven principal controls in passenger cars using the paper-pencil and hardware tests, and to examine stereotype strength of the paper-pencil test through comparing the stereotypes for the controls derived by the two methods. Ninety two and 60 college-aged students participated in the paper-pencil test and the real car simulation of the hardware test, respectively. There are dominant motion-directions for all controls in the paper-pencil test, while in the hardware test, there are dominant motion-directions for six controls including head light, high beam, door window, ignition key, door key and door lock controls. The stereotypes of motion-directions for six controls obtained by the paper-pencil test were the same as or similar to those by the hardware test. It was inferred from this that the congruence of the stereotypes by the two methods might be attributed to two simple motion-direction principles of 'clockwise for increase' and 'upward for increase.' Although it is known that the hardware test would be best for obtaining accurate stereotypes between controls and displays, this study implies that if the paper-pencil test is well designed, the paper-pencil test can produce the same results as the hardware test at low cost and without consuming time.

The aims of this study are to investigate stereotypes of motion-direction and real motion-directions for seven principal controls in passenger cars, and to compare the stereotypes and real motion-directions for the controls. The stereotypes were obtained by using questionnaire survey, in which 385 subjects participated. The real motion-direction data were gathered for 64 passenger cars including RVs and SUVs. The results showed that while there are dominant motion-directions for head light, door key and door lock controls, dominant motion-directions are not found for other controls investigated in this study. The stereotypes of motion-directions for seven controls obtained in this study were much different from those of the real data. Furthermore, the stereotypes for wiper, head light and high beam controls based on the questionnaire survey were opposite to the real motion-directions.

본(本) 연구(硏究)는 고성능(高性能) 농약(農藥) 살포기인 스피드 스프레이어에 있어서 농약(農藥)살포 시(時) 인체(人體)에 해로운 농약(農藥)으로부터 오퍼레이터를 보호(保護)하기 위하여 무인(無人) 운전(運轉) 연구(硏究)의 일환(一環)으로 원칩 마이크로 컴퓨터를 이용(利用)하여 원격조종(遠隔操縱) 변속장치(變速裝置)를 개발(開發)할 목적(目的)으로 수행(遂行)한 연구(硏究)에서 얻어진 결과(結果)를 要約(요약)하면 다음과 같다. 1. 시작(試作)한 원칩 마이크로 컴퓨터를 이용(利用)한 원격조종(遠隔操縱) 변속장치(變速裝置)는 변속조작(變速操作) 100회(回) 중(中) 오동작(吳動作)이 전무(全無)하여 조작성(操作性)이 정확(正確)하였다. 2. 使用된 원칩 마이크로 컴퓨터의 프로그램은 기계어(機械語)로 작성(作成)되었으며, 변속조작(變速操作) 시간(時間)이 3초(初) 이내(以內)로 사람에 의한 변속조작(變速操作) 시간(時間)과 거의 같았다. 3. 본(本) 연구(硏究)에 사용(使用)한 원칩 마이크로 컴퓨터는 지금까지 자동화(自動化) 장치(裝置)에 많이 도입(導入) 사용(使用)하던 퍼스널 컴퓨터, 랩탑 컴퓨터, 원 보오도 컴퓨터 등과 비교하여 볼 때 극소형(極小型)으로 소비전력(消費電力)이 작으며 염가(廉價)이기 때문에 농업용(農業用)으로 적합(適合)하다고 사료(思料)된다. 4. 본(本) 연구(硏究)에 사용(使用)된 변속장치(變速裝置)는 승용(乘用) 농업기계(農業機械)와 같은 형식(形式)의 것이므로 농업용(農業用) 트렉터 및 포장기계(圃場機械)의 자동화(自動化) 기계(機械)에도 적용(適用)될 것으로 판단(判斷)된다. 5. 본(本) 실험장치(實驗裝置)는 직접(直接)레버조작(操作) 및 원격조종(遠隔操縱)이 동시(同時)에 이루어지도록 제작(製作)하였기 때문에 구조적(構造的)으로 복잡(複雜)하나 직접(直接)레버 조작부(操作部)를 제거(除去)하고 원격조종부(遠隔操縱部)만 스피드 스프레이어에 장착(裝着)하면 더욱더 소형화(小型化) 되고 중량(重量)도 더 가벼워져 사용(使用)하기에 편리(便利)한 장치(裝置)가 될 것으로 사료(思料)된다.

On this paper, the traditional methods for the measurement of ship's maneuverabilities during the sea-trial of newly built ship are summarized and new methods for the same measurement using Integrated Navigation System and GPS are introduced. After various sea-trials of training ship "HANNARA" which are equipped with modern INS and GPS system, the results are compared and analysed. The purpose of this paper is to present more accurate methods of measurement of ship's maneuverabilities during sea-trial using INS and GPS which are gradually becoming the basic navigational equipments on many newly constructed vessels.d vessels.