검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 12

        1.
        2023.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 지구 온난화의 영향으로 태풍의 파괴력이 증가함에 따라 부유식 해상풍력발전기의 막대한 유실과 붕괴에 대한 우려가 깊어지고 있다. 부유식 해상풍력발전기의 안전한 운영을 위해 새로운 형태의 탈착형 계류 시스템 개발이 요구되고 있다. 본 연구에서 고 려한 새로운 반잠수식 계류 풀리는 기존의 탈착형 계류 장치에 비해 계류 라인으로 부유식 해상풍력 터빈을 보다 쉽게 탈부착할 수 있도 록 고안되었다. 8MW급 부유식 해상풍력발전기에 적용 가능한 반잠수식 계류 풀리의 초기 설계에 대한 구조적 안전성을 검토하기 위해 3D 프린터를 이용하여 축소구조모형을 제작하고, 이 모형에 대한 구조시험을 수행하였다. 축소 모형의 구조시험을 위해 3D 프린팅에 사 용된 ABS 소재의 인장 시편을 제작하고 인장시험을 수행하여 소재의 물성을 평가하였다. 인장시험에서 얻은 재료 특성과 축소모형 구조 시험과 동일한 하중 및 경계 조건을 적용하여 반잠수식 계류 풀리의 유한요소해석을 수행하였다. 유한요소해석을 통해 반잠수식 계류 풀 리의 구조적 취약 부분을 검토하였다. 반잠수식 계류 풀리의 주요 하중조건을 고려하여 구조모형시험을 수행하였으며, 재료의 최대인장 응력 이상이 발생하는 위치에 대해 유한요소해석과 시험 결과를 비교하였다. 유한요소해석과 모형시험의 결과로부터 작동조건에서는 Body와 Wheel의 연결부 구조가 취약한 것으로 파악되었고, 계류조건에서는 Body와 Chain stopper의 연결부 구조가 취약한 것으로 검토되었 다. 축소모형 구조시험에서 나타난 SMP의 구조 취약부는 구조해석의 결과와 일치하는 것으로 나타났다. 연구 결과를 통해 반잠수식 계류 풀리의 초기 설계에 대한 구조적 안전성을 실험적으로 검증할 수 있었다. 또한, 본 연구 결과는 상세설계 단계에서 반잠수식 계류 풀리의 구조 강도를 향상시키는데 유용하게 활용될 수 있을 것으로 판단된다.
        4,000원
        2.
        2019.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This is an experimental study where the coefficient of friction between engine pulley and V-Belt is obtained. The experimental method is applied pulleys made of existing steel and aluminium materials. The relative friction workpiece is a v-belt incorporating rubber with cloth. The friction test uses a pin-on-disk friction modulator and measures the coefficient of friction depending on the number of revolutions in the disc. As a result, in the case of aluminum material, there was a sliding phenomenon because the coefficient of friction was small when accelerating and decelerating. Also, the variation of the friction coefficient was severe when the rotation speed was increased or decreased. Therefore, it is considered that the aluminum pulley is slippery even if it is fit to the structural rigidity. Therefore, in order to secure a stable friction coefficient, the pulley groove surface will be surface-treated, a special alloy is added, or a heat treatment is required.
        4,000원
        3.
        2017.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper uses finite element analysis to analyze the equivalent stress and fatigue duration distributed in the timing belt pulley of the rotating part. The pulley structure used for analysis was categorized into one body type and separate axis type and their characteristics were analyzed when materials S45C and SCM440-870C were applied. A static structural analysis and durability analysis show that when external forces are applied to the pulley, the separate axis structure is structurally safer and more favorable in terms of fatigue, compared to the one body. In addition, the separate axis structure using SCM440-870C material was found to have the best safety factor at 10.4 and infinite fatigue life. These findings are expected to be useful when manufacturing timing belt pulleys.
        4,000원
        4.
        2014.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study variable radius pulley is proposed, and the proposal should be applied to pulley of CVT. Variable radius pulley consists of two disks and sliding pins. Phase difference of two disks make a change pitch diameter. Therefore change speed is accomplished by changing pitch diameter of pulley. In this paper simulation for slot variation of rotary disk of the variable radius pulley was performed. Softwares for simulation are Pro/Engineer5 and Hypermesh11.0. The results of simulation are appropriate to put to practical use of the variable radius pulley
        4,000원
        5.
        2014.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study variable radius pulley is proposed, and the proposal should be applied to pulley of CVT. Variable radius pulley consists of two disks and sliding pins. Phase difference of two disks make a change pitch diameter. Therefore change speed is accomplished by changing pitch diameter of pulley. In this paper analysis of rotating force for slot variation of the rotary disk of variable radius pulley was performed. The results of analysis are appropriate to put to practical use of the variable radius pulley.
        4,000원
        6.
        2014.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, new CVT system adapted for variable radius pulley is proposed to be available for pulley of CVT. Variable radius pulley consists of two disk and sliding pins joined by these disks. On account of phase difference of two disks, sliding pins move to radial direction and pitch diameter is varied. Therefore, change speed is accomplished by varying pitch diameter of pulley. CVT adapted for variable radius pulley is also performed with dynamometer test and axial distance variation. As a experimental result variable radius pulley can be alternative such as bicycle.
        4,000원
        7.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Dry CVT(Continuously variable transmission) consists of a driving pulley and a driven pulley joined by rubber V-belt. Each pulley consists of a fixed flange and a movable flange. The movable flange of the driving pulley has the centrifugal roller and a ramp plate in the flange. The movable flange moves toward a fixed flange under the actuation of a centrifugal roller, as the driving pulley speed increases. The main advantages of the Dry CVT with V-belt, which has been popular in Asia, are a simple mechanism, less maintenance and low cost. The important claim which have an influence on the performance of the Dry CVT is the wear of the centrifugal roller. In this study proposed an improved design of driving pulley reducing the wear of the centrifugal roller in order to provide some design guidelines.
        4,000원
        8.
        2009.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Dry CVT(Continuously variable transmission) consists of a driving pulley and a driven pulley joined by rubber V-belt. Each pulley consists of a fixed flange and a movable flange. The movable flange of the driving pulley has centrifugal rollers and a ramp plate in it. The movable flange moves toward a fixed flange under the actuation of a centrifugal roller, as the driving pulley speed increases. In this study, computer simulation for a driving pulley was carried out for the purpose of analysis a Dry CVT. Based on the simulation we investigated relations between each omponent of driving pulley that consists of roller, movable flange and ramp plate
        4,000원
        9.
        2007.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The scooter CVT is consisted of driving pulley, rubber V-belt and driven pulley. A driving pulley of CVT plays a vital role. In this study, contact forces of movable flange, roller and ramp plate are analyzed for wear of roller. As the results, 1) when incline angle of ramp plate become decreased, reaction difference of ramp plate and movable flange become increased, so roller wear can be decreased, 2) when radius of movable flange profile is increased, reaction difference become increased also. Roller wear had been caused serious claim. Based on the analysis, advanced model of driving pulley is presented.
        4,000원