This paper reports an enhanced strategy for improving the mechanical flexibility and ionic kinetic properties of a double network hydrogel based on Co2+- coordination assistance. The modified double-network hydrogel was obtained by using acrylic acid and N, N-dimethylacrylamide as monomers, adding cross-linking agents and 3D nitrogen-doped graphenes. The tensile fracture rate of the modified hydrogel was 1925% and its tensile strength was 1696 kPa. In addition, the hydrogel exhibited excellent ionic dynamics, and its application to an all-solid-state supercapacitor was able to achieve a specific capacitance of up to 182.8 F g− 1. The supercapacitor exhibited an energy density of 34.2 Wh kg− 1, even when operating at a power density of 5 kW kg− 1, highlighting its significant potential for practical applications.

The thermoelectric effect, which converts waste heat into electricity, holds promise as a renewable energy technology. Recently, bismuth telluride (Bi2Te3)-based alloys are being recognized as important materials for practical applications in the temperature range from room temperature to 500 K. However, conventional sintering processes impose limitations on shape-changeable and tailorable Bi2Te3 materials. To overcome these issues, three-dimensional (3D) printing (additive manufacturing) is being adopted. Although some research results have been reported, relatively few studies on 3D printed thermoelectric materials are being carried out. In this study, we utilize extrusion 3D printing to manufacture n-type Bi1.7Sb0.3Te3 (N-BST). The ink is produced without using organic binders, which could negatively influence its thermoelectric properties. Furthermore, we introduce graphene oxide (GO) at the crystal interface to enhance the electrical properties. The formed N-BST composites exhibit significantly improved electrical conductivity and a higher Seebeck coefficient as the GO content increases. Therefore, we propose that the combination of the extrusion 3D printing process (Direct Ink Writing, DIW) and the incorporation of GO into N-BST offers a convenient and effective approach for achieving higher thermoelectric efficiency.

In this paper, we presented a hybrid composite of graphene quantum dots (GQDs)-modified three-dimensional graphene nanoribbons (3D GNRs) composite linked by Fe3O4 and CoO nanoparticles through reflux and ultrasonic treatment with GQDs, denoted as 3D GQDs-Fe3O4/CoO@GNRs (3D GFCG). In this hybrid, the 3D GNRs framework strengthened the electrical conductivity and the synergistic effects between GQDs and 3D GFCG enhanced the oxygen reduction reaction (ORR) activity of the nanocomposite. The results imply that decorating GQDs with other electro-catalysts is an effective strategy to synergistically improve their ORR activity.

Due to its capacity to manufacture low-cost 3D-printed structures, 3D-printing technology offers a unique opportunity for the fast epitome of various applications. Using a typical fused deposition modeling 3D printer along with a Discovery extruder, a graphene-ink can be 3D printed to produce an interdigitated electrode (IDE) arrangement. This work fabricated a 3D-printed planar supercapacitor from pristine graphene-ink without using high-temperature processing or functional additives. The printable ink (89%) is formulated from pristine graphene without the addition of any functional additives. The symmetric flexible supercapacitor is demonstrated with an excellent specific capacitance of 137.50 F/g at 0.5 A/g and an energy density of 12.23 Wh/kg. The obtained gravimetric energy density beats reported earlier carbon-based supercapacitors that are 3D or inkjet printed. The flexibility and robustness of 3D-printed devices are achieved up to 150° folding angles. This work demonstrates an efficient and easy method for fabricating practical energy storage devices featuring a customizable shape and excellent flexibility.

In this study, the MoS2 nanoparticles grown on crumpled 3D graphene microball (3D GM–MoS2) was synthesized using a microfluidic droplet generator with thermal evaporation-driven capillary compression and hydrothermal reaction. The morphology and size of 3D GM–MoS2 are controlled by the concentration of nano-sized graphene oxide (GO) and the flow rate of oil phase on the droplet generator. The 3D GM–MoS2 with fully sphere-shape and uniform size (~ 5 μm), and homogeneous growth of MoS2 nanoparticles could be synthesized at the flow rate of the oil phase of 60 μL/min with the optimized GO concentration of 1.0 mg/mL, and ( NH4)2MoS4 concentration of 2.0 mg/mL.

The study presented in the article is focused on use of graphene obtained by novel microwave-enhanced chemical vapor deposition (MECVD) method as a construction material for 3D porous structures—aerogels and sponges. MECVD graphene nanoplatelets-based aerogels were obtained by mixing MECVD graphene nanoplatelets and chitosan, dissolved in 3% acetic acid followed by its freeze drying and carbonization at 800° in inert medium. Surface morphology of aerogels was characterized by SEM. MECVD graphene nanoplatelets-based aerogels are characterized by a porous structure; they are superhydrophobic and possess high sorption capacity with regard to organic liquids of different densities. Polyurethane sponges coated with MECVD graphene can serve as an alternative to aerogels. The process of their obtaining is cheaper and less complicated. They were obtained by facile “dip-coating” method, modifying its surface to increase its hydrophobicity. The resulting sponges are superhydrophobic and superoleophilic, and demonstrate high rate of sorption of organic liquids and can be easily regenerated by squeezing. In addition, they can be used as a separating material in conjunction with vacuum system for continuous and selective collection of organic liquids from the surface of water.

3D프린팅 기술은 산업적 응용을 넘어서 기계 설비 및 각종 장비의 부품생산뿐만 아니라 의료, 식품, 패션에 이르기까지 많은 시제품들의 개발 및 연구가 진행되고 있다. 3D 프린팅 기반 기술의 적용사례를 볼 때 정밀도와 제작 속도 측면에서도 다른 산업에 충분이 활용될 수 있는 기술의 개발이 보고되고 있으나, 아직까지는 시제품 위주로 이용되고 있으며, 향후 3D 프린팅 기술은 4차산업혁명과 관련하여 광범위한 분야에서 응용될 수 있는 완성품이나 부품제작에 이용될 것으로 예상된다. 본 연구에서는 탄소나노 재료중 대표적으로 많이 이용되는 환원그래핀 [rGO(reduced graphene oxide)]과 전도성 고분자중 생체 친화적인 특성을 갖는 폴리피롤[Ppy(Polypyrrole)]의 복합체를 생분해성 고분자인 폴리카프로락톤 [PCL(polycaprolactone)]과 혼합하여 3D 프린팅용 전도성 레진을 개발하고자 하였다. 결과로, 폴리피롤과 환원그래핀 각각 5 wt%, 0.75 wt% 에서 최적의 전기적 특성을 나타내었으며, 환원그래핀의 농도에 따른 표면분석에서도 이와 부합하는 결과를 확인 할 수 있었다. 본 연구를 통하여 제조된 전도성 레진은 3D 프린팅 뿐만 아니라, 다른 산업분야의 전자재료에도 적용이 가능할 것으로 사료된다.