Korea Atomic Energy Research Institute (KAERI) is planning to disposal of the radioactive contaminated cement waste form to the final disposal facility. The final disposal facility require evaluation of immersion, compressive strength, and radionuclide inventory of radioactive wastes to meet the acceptance criteria for safe disposal. According to the LILW acceptance criteria of the Nuclear Safety and Security Commission ok Korea (NSSC), the disposal limit radioactivity of 129I (3.70×101 Bq/g) is lower than other radionuclides. 129I emits low energy as its disposal limit is low, so it is difficult to analyze in the presence of 137Cs and 60Co which emit high energy. Therefore, it is essential to an accurately separate and analyze iodine in radioactive waste. In this study, we focused on the determination of 129I in cement waste form containing 137Cs, 60Co. We added 1 g of 129I(11.084 Bg), 137Cs(1,300 Bq) and 60Co(402 Bq) to cement waste form, respectively. The separation of 129I in cement waste form was carried out using an acid leaching method. And, we confirmed the specific activity of 137Cs and 60Co at each separation step. It was observed that an acid leaching method showed the remove efficiency 137Cs(99.97%) and 60Co(99.94%), respectively. In addition, 129I was also analyzed at approximately 96.44% in simulated contaminated cement waste form. In conclusion, through this experiment, it was confirmed that 129I could be successfully separated and analyzed by using the acid leaching method in cement waste form containing excessive 137Cs and 60Co.

According to the Nuclear Safety and Security Commission (NSSC) Notice No. 2021-26 “Delivery Regulations for the Low- and Intermediate Level Radioactive Waste (LILW)”, the activity of 3H, 14C, 55Fe, 58Co, 60Co, 59Ni, 63Ni, 90Sr, 94Nb, 99Tc, 129I, 137Cs, 144Ce, and gross alpha must be identified. Currently, the scaling factor of the dry active waste (DAW) for LILW is applied as an indirect evaluation method in Korea. The analyses are used the destructive methods and 55Fe, 60Co, 59Ni, 63Ni, 90Sr, 94Nb, 99Tc, and 137Cs, which are classified as nonvolatile nuclides, are separated through sequential separation and then measured by gamma detector, liquid scintillation counter (LSC), alpha/beta total counter (Gas Proportional Counter, GPC), and ICP-MS. We will introduce how to apply the existing nuclide separation method and improve the measurement method to supplement it.

The purpose of full system decontamination before decommissioning a nuclear power plant is to reduce radiation exposure of decommissioning workers and to reduce decommissioning waste. In general, full system decontamination removes the CRUD nuclides deposited on the inner surface of the reactor coolant system, chemical and volume control system, residual heat removal system, pressurizer, steam generator tube, etc. by chemical decontamination method. The full system decontamination process applied to Maine Yankee and Connecticut Yankee in the USA, Stade, Obrigheim, Unterweser, Nekawestheim Unit 1 in Germany, Mihama Unit 1 and 2 in Japan, Jose Cabrera Unit 1 in Spain, and Barseback Unit 1 and 2 in Sweden are HP/CORD UV, NP/CORD UV, and DfD. In this study, the quantity of 60Co radioactivity removal, metal removal, ion exchange resin and filter generation according to reactor power, surface area and volume of the full system decontamination flow path, and the decontamination process were compared and analyzed. In addition, the quantity of 60Co radioactivity removal by each nuclear power plant was compared and analyzed with the evaluation results of the 60CO radioactivity inventory of the Kori Unit 1 full system decontamination loops conducted by SAE-AN Enertech Corporation.

국내 경수로원전 1차 냉각재와 중저준위 방사성폐기물 내 핵종방사능비에 대한 유관성을 검토하고자 특수하게 제작된 RCS sampling kit를 이용하여 원전 정상운전기간 동안 핵종을 포집하였다. 시료채취는 경수로형 전 원자력 발전소를 대상으로 2004년과 2005년에 걸쳐 시료를 채취하였고, 방사화학적 방법인 시료 전처리 및 핵종분리를 통하여 핵종 방사능을 분석하였다. RCS sampling kit 내 필터와 수지에서 분석된 핵종 방사능비는 각각 2.32-2와 7.3E-1을 보였으며, 동일주기 내 발생된 중 저준위 방사성폐기물인 농축폐액, 폐수지, 잡고체시료 내 핵종 방사능비는 각각 6.3E-1, 6.7E-1 및 5.7E-2로 시료유형 에 따라 1차 냉각재와 유사성을 갖는 것으로 확인하였다.

IAEA, FT-04-020 및 ANS 16.1의 침출시험법을 각각 수행하여 얻은 시험결과를 이용하여 상호 비교 평가하였다. 붕산을 함유한 파라핀 및 시멘트 고화체에서의 Co 과 Cs의 ANS 16.1의 침출지수는 6이상이었으나 고화매질과 탈염수의 종류에 따라 상반되는 침출거동을 보였다. 침출수로 합성해수와 탈염수를 사용하였을 경우 Co는 시멘트 고화체에서는 합성해수, 파라핀 고화체에서는 탈염수에서 침출이 높았다. 반면에 Cs의 침출정도는 시멘트에서는 탈염수, 파라핀에서는 합성해수에서 높았다. Co의 침출분율은 시멘트 고화체에서 IAEA ＞ ANS ＞ FT의 순으로 높았으며, 반대로 파라핀고화체에서는 이의 역순이었다.