In this study, the appearance change and the heat․moisture transfer properties of knitted fabric by yarn shrinkage were examined to obtain useful data on the development of thermo-sensitive functional materials. Eleven types of knitted fabric were knitted using highly bulky acrylic-blended yarn. After shrinking the specimens using dry heat treatment, the appearance change and thickness were measured. An HEC simulator was adopted for measuring the heat․moisture transfer properties of specimens by yarn shrinkage. When holes were arranged vertically in the mesh structure, the specimens with 2,500 and 5,000 holes showed high percent change of hole area, appearance, and thickness. When holes were diagonally arranged in the mesh structure, the percent change of hole area in the specimen with 1,250 holes was larger than the one with 2,500 holes. However, the dimensional stability of the specimen with 2,500 holes was better because of its smaller appearance and thickness change. In the tuck structure, the percent change of hole area in the specimen with 625 and 416 holes was relatively large compared with the appearance and thickness change. Furthermore, the hole size in the tuck structure was smaller than that in the mesh structure but the percent change of hole area was larger. Therefore, it was proved that the tuck structure is more suitable than the mesh structure for developing thermo-sensitive functional materials. Heat․moisture transfer property test verified that the change of hole area by yarn shrinkage enabled obtaining the thermal effect due to the distinct temperature difference in the inner layer.

There are more than 9,300 bridges on the highway, of which about 34%(3,150) are PSCI bridges. The safety of these bridges is directly influenced by the tensile strength of the internal tendons(strand) and the strength of the concrete compared to the reinforcing bars from the design viewpoint. Therefore, in this paper, for the maintenance plan considering the damage of the internal tendons, the internal tendon cutting and truck loading test was conducted and deflection and appearance status change was analyzed. As a result of the test, deflection increased and flexural cracks occurred on center of the girder. And longitudinal direction cracks followed tendon placement occurred on a bottom flange.

본 연구에서는 탱자의 미성숙배로부터 캘러스 유도와 재분화에 관하여 연구하였다. 탱자 배발생 캘러스들은 3% sucrose와 44.4 μm BA로 처리된 ½MS배지에서 광조사(2,000 1x, 16h)시에 미성숙종자의 배로부터 유도되었으며 식물체 재분화는 MS배지에 5.0 μm BA를 첨가하였을 때 가장 양호하였다. 탱자는 배양2~3주경에 담황색의 캘러스가 유도되었으며 배양5~6주경부터는 딱딱한 녹색의 캘러스로 변하였다. 기내 재분화는 3% sucrose와 5.0 μm BA가 첨가된 MS배지에서 배발생 캘러스로부터 직접 유도되었다. 또한 배양 12주 후에 Multishoot가 재분화되었으며, 배양 16주 후에 뿌리가 형성되었다. 또한 뿌리가 형성된 식물체들은 토양으로 옮겨져 완전한 식물체로 잘 자랐다. 광학 현미경 관찰시 탱자에서는 배양4주경에 하얀색의 조밀한 배양된 세포들이 나타났다. 배양6주경부터는 세포들이 신장되면서 배발생 돌기가 나타났으며 주변의 세포들은 액포화 되었다. 또한 배양12주경에는 미성숙 잎에서 발달된 유낭과 전형성층을 관찰하였다.