The purpose of this study is to decrease a stress shielding effect shown in the hip joint. To conduct this study, the clad materials were produced by using an explosion welding method with two materials that were different in the elastic modulus like Ti-6Al-4V alloy and pure Ti. As for the clad materials, the Ti-6Al-4V alloy with large elastic modulus was designed as the neck of femur, and the pure Ti with small elastic modulus as the body of femur. The joints of clad materials formed by the explosion welding showed the typical wave shape, and its thickness was about 0.2㎛. New crystal or grain structure was not formed in the joints. In addition, the Vickers hardness in the joints formed the middle value between the base metal and clad metal. As a result of manufacturing prototype by processing the clad materials in three dimensions, this study gained good shape, and if it is to be applied to clinical in the future, this researcher can expect good results. From the result of this research above, it may be summed up as follows. It is considered as the stress shielding phenomenon showed on the hip joint can be decreased to a certain degree if this researcher is to utilize two clad materials with different elastic modulus like Ti-6Al-4V alloy and pure Ti

In this study, a large modulus of elasticity of the titanium alloy in use, to create artificial hip stress shielding effect appears to reduce the head portion is excellent in the strength of Ti-6Al-4V, making bone pusher which requires low elastic modulus relative modulus of pure titanium grade 2, using a small two metal after welding by explosion welding hip was made. Explosion pressure welding by the welding region with respect to the mechanical properties and the tissue was observed.