본 연구는 에너지 저장 응용을 위한 PVI-PGMA/LiTFSI 고분자 막 전해질 및 CxNy-C 유연 전극의 합성 및 특성 에 관한 연구이다. 이중 기능을 갖는 PVI-PGMA 공중합체는 우수한 이온 전도성을 나타내었으며, PVI-GMA73/LiTFSI200 막 전해질은 1.0 × 10-3 S cm-1의 최고 전도도를 달성하였다. CxNy-C 전극의 전기화학적 성능을 체계적으로 분석하였으며, C3N2-C는 나노와이어와 다면체로 구성된 높은 연결성을 갖는 하이브리드 구조와 이중 Co/Ni 산화물을 포함하여 풍부한 산 화환원 활성 부위와 이온 확산을 용이하게 하는 특징으로 인해 958 F g-1의 최고용량 및 최소한의 전하 전달 저항(Rct)을 달성 하였다. 흑연 탄소 껍질의 존재는 충전-방전 동안 높은 전기화학적 안정성에 기여하였다. 이러한 결과들은 고성능 에너지 저 장 장치인 슈퍼커패시터 및 리튬 이온 전지와 같은 첨단 에너지 저장 장비에 PVI-PGMA/LiTFSI 고분자 막 전해질과 CxNy-C 전극을 활용하는 잠재력을 보여주었으며, 지속 가능하고 고성능의 에너지 저장 기술을 더욱 발전시키는 길을 열어가 고 있다.

Commercial carbon fiber cloth (CFC) is treated by the Joule-heating pyrolysis method in air to boost its capacitive performance on the premise of energy- and time-saving considerations. A thermoelectric coupling model suitable for the Jouleheating pyrolysis is successfully established based on the comparisons between the simulated temperatures and actually measured ones. The temperature field on CFC surface induced by the Joule heat presents a concentric-ellipse shape that the temperature in the core is the maximal and gradually decays outward. Increasing the direct current (DC) voltage which is applied to the CFC from 1.0 to 6.0 V, the core temperature on the CFC surface can be raised from 31 to 519 °C. The specific surface area and hydrophilicity of the as-prepared porous CFC are greatly improved compared with the pristine one. Electrochemical test shows that the optimal Joule-heating pyrolysis parameters falls at 5.0 V and 12.5 min, and the areal specific capacitance of as-obtained CFC-5.0-12.5 is about 80 folds that of the pristine CFC. In addition to the much shorter preparation time, all the characteristics including areal specific capacitance, rate performance, and electrical conductivity of the Joule-heating pyrolyzed CFC are superior to those of the electrical furnace pyrolyzed counterpart. The aqueous symmetrical supercapacitor made of CFC-5.0-12.5 electrodes exhibits considerable power and energy densities with respect to the previously reported carbon electrode-based supercapacitors. For conductive precursors, the Joule-heating pyrolysis can be an ideal substitute for the traditional electric furnace pyrolysis.

Conductive carbon cloths (CCs) have been great attention as a promising current collector for flexible supercapacitors that supply power to portable and wearable electronics. However, the hydrophobic surface and weak adhesion with active materials has limited to be adopted as the binder-free and flexible electrode with mechanical/electrochemical stability. In this work, we demonstrate preparation of binder-free and flexible electrodes based on polyaniline (PANI) on carbon cloth. Polydopamine (PDA) layer are used to impart hydrophilicity, leading to uniform growth of PANI on the hydrophobic surface of carbon. Furthermore, PDA layer improves adhesion strength between PANI and carbon substrates, which allows for superior mechanical stability under ultrasonic condition. PANI-based flexible electrode shows high areal capacitance (160.8 mF cm− 2 at 0.5 mA cm− 2), good rate capability (71.1% even at high current density of 10 mA cm− 2), and long-term cycling stability (82.6% capacitance retention after 1500 cycles). Furthermore, a quasi-solid-state flexible supercapacitor reveals remarkable mechanical flexibility and durability, with superior capacitance retention (~ 100%) in bent state and after repetitive 1000 cycles.

Electrochemical charateristics of activated carbon fiber cloth(ACFC) electrode were studied with propylene carbonate(PC), γ-butyrolactone(GBL) and N,N-dimethyl-formamide(DMF) as a solvent and tetraethylammoniumtetrafluoroborate(TEABF4), tetraethylammoniumhexafluorophosphate(TEABF6), tetrabutylammoniumtetrafluoroborate(TBABF4) and tetrabutylammonium hexafluorophosphate(TBAPF6) as an electrolytes(active material). The concentrations of electrolytes were in the range of 0.2~1.2 N, the volume ratios of PC and DMF as a mixed solvent system, were 90：10, 80：20, 70：30, 60：40, 50：50, and 40：60 vol%. Electrochemical characteristics such as electric conductivity, internal resistance, and electric capacitance of fabricated unit cells were measured after the moisture of activated material was removed with molecular sieve. Electrochemical characteristics were better in mixed solvents system than in mono solvent system. The mono solvent system of 1.0 N electrolyte of GBL/TEABF4 with activated carbon cloth electrodes showed better result but the mixed solvent system with PC and DMF/TEABF4(50：50 vol%) and the concentration of 1.0 N electrolyte showed the best characteristics. Internal resistance was 3.47 Ω and specific capacitance was 19.1 F/g respectively.y.