Increasing demand for fossil fuels is associated with massive atmospheric CO2 levels. Considering that numerous studies have been published with CO2 capturing techniques, utilizing techniques are yet in early stage with financial or technical issues. As a part of chemical conversion in CO2 utilization, this paper investigated the performance of a CO2 and H2O mixture (CHM) onto activated carbon fibers (ACF) for surface modification. CHM-treated ACF samples were prepared at a pressure of 20 bar with 100 °C of water vapor and 750 μL of CO2 for 1 h through the gas-phase, and labeled as C-ACF850. For the control sample, N-ACF850 was also prepared by the impregnation of nitric acid. Physiochemical analyses revealed that the overall characteristics of C-ACF850 lay between ACF850 and N-ACF850. C-ACF850 experienced minimized surface area decrement (21.92% better than N-ACF850), but increased surface functional groups (50.47% better than ACF850). C-ACF850 also showed preferable adsorption efficiency on selected metals, in which case both physical and chemical properties of adsorbent affect the overall adsorption efficiency. In this regard, a novel applicability of CHM may present an appealing alternative to traditionally used strong acids.

폐시멘트, 폐콘크리트, 제강 슬래그, 폐수 등을 포함하여 다양한 폐기물들이 여러 산업으로부터 배출되고 있다. 그런데 이러한 폐기물들은 Mg2+ 이온, Ca2+ 이온을 다량 포함하고 있다고 알려져 있다. 폐기물 처리 시 이러한 금속 이온을 활용한다면 MgCO3, CaCO3 등 다른 유용한 물질로 전환시킬 수 있다. 이를 위해 지구온난화를 일으키는 주요 원인으로 알려진 이산화탄소를 사용할 수 있고, 이는 이산화탄소 저감 및 폐기물 처리를 동시에 해결할 수 있을 것으로 보인다. 본 연구에서는 CO2의 용이한 전달을 돕기 위한 습식 흡수제에 대해 제안하고 Henry constant, Diffusivity, 총괄반응속도상수(kov)를 측정하였다. 흡수제는 7 wt% 암모니아, 3 wt% ʟ-Arginine, 1 wt% 부식방지제(Imidazole과 1,2,3-Benzotriazole)를 물에 녹여 제조하였다. 암모니아는 기존에 습식흡수제로 사용되던 MEA보다 저렴한 가격을 가지고 있으며 CO2 흡수 능력 또한 우수하다고 알려져 있다. 최근 아미노산은 우수한 CO2 흡수능력과 친환경적인 특성으로 많은 연구가 진행되고 있으며 두 종류의 부식방지제는 암모니아에 의해 발생할 수 있는 플랜트 장비의 부식을 방지하기 위해 첨가되었다. 303.15 K에서 333.15 K의 온도에서 실험이 진행되었으며 실험 결과와 CO2/N2O analogy를 이용해 각 값을 계산하였다.

The concentration of carbon dioxide in atmosphere is gradually increasing as industrial activity is being facilitated. Since most of the industries are getting their energy from fossil fuels such as coal, petroleum and gas, carbon dioxide production is inevitable. However, by applying suitable carbon capture process at the end of the carbon dioxide emission facilities, the amount of carbon dioxide emitted to atmosphere can be significantly reduced. Thus, Carbon Capture and Storage (CCS) technologies have been developed by many nations. In that technology, captured carbon dioxide is stored in deep ocean or the underground holes. However, considering environmental effects and geological distinct characteristics, CCS technologies are thought to be developed finding new way to handle captured carbon dioxide. One of the method is to turn captured carbon dioxide into precipitated calcium carbonate salt by adding calcium ions. Conventionally, calcium carbonate salt formation is achieved by reaction under high pressure and temperature. However, this method requires large amount of energy to maintain reaction condition. Hence, carbon dioxide reduction and utilization technology through carbon fixation or carbonation in aqueous phase is proposed in this research. Using aqueous absorbent, carbon dioxide is captured and precipitated calcium carbonate salt was formed by adding calcium ions. All of the reaction occurred under ambient temperature and pressure (1 atm, 298.15 K). The amount of carbon dioxide reduction as well as yield of precipitated calcium carbonate salt were considered. Also, through instrumental analysis including Scanning Electron Microscope (SEM), X‐Ray Diffraction (XRD) and Thermogravimetric Analysis (TGA), possibility of final product utilization was investigated.

The amount of carbon dioxide emission is continuously increasing and many researchers are concerned about climate change caused by its emission. Hence, some technologies which can reduce its emission have been developed and commercialized in many industries. These technologies are commonly called Carbon Capture and Storage (CCS) technology. In conventional CCS technology, carbon dioxide gas produced from industrial processes was usually captured by basic liquid absorbent such as monoethanolamine(MEA) and so on. After it is captured by those absorbents, they was flown to desorption step and was compressed at high pressure and transported to suitable places such as deep ocean or deep underground. However, there exist some problems when carbon dioxide is stored in such places. For instance, leak into the atmosphere can occur. Also, some nations including Korea may have difficulty finding suitable places for its storage since area of the nations is not that large and the ground is not stable. So, the method that can utilize captured carbon dioxide has been developed. When carbon dioxide is combined with metal cation such as calcium ion, it becomes calcium carbonate (CaCO3) which can be used for various purposes like construction materials, pharmaceutical manufacture, additives and so on. This is called Carbon Capture and Utilization (CCU) technology. In this research, seawater was used to supply calcium ions. There contained much amount of calcium component in seawater and amount of seawater is virtually limitless. MEA was used as absorbents and saturated by simulated flue gas. Pretreated seawater was then added to saturated absorbent. When carbon dioxide gas is dissolved to MEA, it exist in forms of ions and they can easily produce precipitated calcium carbonate (PCC) salts by reacting with calcium ions contained in seawater.