이 글은 최근(2020~2023) 발굴된 부소산성 추정 서문지 일원 성벽에 대해 검토한 것이 다. 지금까지 부소산성 성벽 연구는 백제 성벽의 판축 구조물에 집중되었고, 백제~고려시 대 전체 성벽의 변천을 검토해 역사적 의미를 파악하였다. 그러나 부소산에서 가장 중요한 백제 성벽의 구조와 공정에 대한 이해는 여전히 확립되지 못하였다. 이 같은 현황 속에 추정 서문지 일원에서 조사된 포곡식 백제 성벽은 구조와 공정을 파악할 수 있는 자료가 확보되 었고, 백제 멸망 이후에도 통일신라시대까지 사용된 현황이 새롭게 확인 되었다. 먼저, 포곡식 성벽 조사 결과 백제~통일신라 성벽의 축조 공정과 변화가 확인되었다. “1.포곡식 성벽 백제(1~2단계): 1)기반층 정지–2)기저부 조성층–3)성벽(판축·내외 보 강층)–4)성벽 내외시설(1단계 완료)–5)증축시설(2단계)” → “2.포곡식 성벽 통일신라(3~4 단계): 1)1차증축(3단계)-2)2차증축(4단계)” → “3.포곡식 성벽 페성(5단계)”순이다. 그리고, 백제 성벽의 세부 축조 공정은 “1)기반층(원지반) 정지-2)기저부 조성층–3)성벽 조성(①목주용 내·외 구 굴착 및 목주 등 판축 구조물 설치+②내외부 보강층→③체성 판 축→④판축 구조물 해체 및 설치+내외부 보강층+체성 판축 등 2~3회 반복)→4)성벽 내외 시설(내부 석축 배수로, 외부 구상유구)” 순으로 파악된다. 이를 통해 볼 때 백제 성벽 구조 는 “기저부[1)~2)]–체성부[3)]–성벽 내외시설[4)]” 등으로 구분된다. 이 가운데, 곡부구간의 2구역 성벽에서 1·2차 기저부층 중간에 ‘목주용 구와 할석 부 석, 석축암거 및 주변 석축, 체성 하부 다짐 및 외벽 일부 석축’ 등을 시설하여 유수 및 침투 수로부터 붕괴를 막기 위한 수준 높은 작업 공정과 기술이 확인되었다. 그리고, 3구역 판축 성벽 내외벽면에서 점토+기와로 미장(피복) 처리한 현황이 확인되었고, 이를 통해 백제 토 축 성벽의 내외 벽면 마감 방식에 대한 새로운 기법을 파악할 수 있게 되었다.

The purpose of this study is to investigate the history, space structures, blueprint, and techniques of the construction of Nam-hea city walls. Nam-hea city walls were relocated in 1439 from Whagumhun-Sansung(火金峴山城) to the present site, nearby Nam-hea Um.(南海邑) The city walls were rebuilt after they were demolished during Japanese invasion on Korea in 1592 and their reconstruction was also done in 1757. At present, the city walls only partially remained due to the urbanization of the areas around them. A plane form of the City wall is a square, and the circumference is approximately 1.3km. According to the literature, the circumference of the castle walls is 2,876尺, the height is 13尺, and the width is 13尺 4寸. Hang-Kyo(鄕校). SaGikDan(社稷壇), YoeDan(厲壇), SunSo(船所) which is a harbor, as well as government and public offices such as Kaek-Sa(客舍) and Dong-Hun(東軒) existed inside the castle walls. Inside the castle walls were one well, five springs, one ditch, and one pond, and in the castle walls, four castle gates, three curved castle walls, and 590 battlements existed. The main government offices inside castle walls were composed of Kaek-Sa, Dong-Hun, and Hang-Chung(鄕廳) their arrangements were as follows. Kaek-Sa was situated toward North. Dong-Hun was situated in the center of the west castle walls. The main roads were constructed to connect the North and South castle gate, and subsidiary roads were constructed to connect the East and West castle gate. The measurement used in the blueprint for castle wall was Pobaek-scale(布帛尺:1尺=46.66cm), and one side of it was 700尺. South and North gate were constructed in the center of South and North castle wall, and curved castle walls was situated there. One bastion was in the west of curved castle walls and two bastions were in the east of curved castle walls. The east gate was located in the five eighths of in the east castle wall. Two bastions were situated in the north, one bastion in the south, and four bastions in the west castle wall. The castle walls were constructed in the following order: construction of castle field, construction of castle foundation, construction of castle wall, and cover the castle foundation. The techniques used in the construction of the castle walls include timber pile(friction pile), replacement method by excavation.

This study examined the effectiveness of the slip-resistance bars on the shear strength and slip displacement components of squat heavyweight concrete (HWC) shear walls with construction joints at the base interface. For the slip-resistance bars, X-, W-, and Ω-shaped bars were arranged at the base interface. W-shaped bars were more effective than the other bars in reducing the slip displacement at the base interface, in particular at the high inelastic level of the drift ratio of 2.0%.