This study was conducted to examine the architectural characteristics of Hak-seong Lee Family's Geun-jae-gong Historic House located in Seok-cheon-ri, Ung-chon-myeon, Ulju-gun, Ulsan. The house is said to have been rebuilt in the early 20th century after it was built in the 18th century, and now there are nine buildings left, including the An-chae, Sa-rang-chae, Sa-dang, storehouses and etc. This house is a large-scale house that is difficult to find similar cases in near region. The division of areas on each building is clear, and it is evaluated that it retains the typical characteristics of the head family in the late Joseon Dynasty in terms of its overall size and layout. In addition, the current wooden structure, which is said to have been rebuilt in the early 20th century, shows the composition method and space utilization method of the 3-Dori type upper structure, which have become more diverse since the late Joseon Dynasty. This has not been dealt with in the previous survey, and should be considered in detail through this paper.

This thesis mainly deals with the meaning of single eaves buildings which have Chunyeo with Sarae. As a rule, building with single eaves does not construct Sarae. But we can find some special buildings using Chunyeo with Sarae in the corners of the eaves. At this time, many people say that lower part of the member so called Alchunyeo, and upper part of the member so called Chunyeo. And they also say that the using of Alchunyeo was caused by the shortage of timber which can make Chunyeo properly. As a result, single eaves buildings using Chunyeo with Sarae in the corners of the eaves were not caused by the shortage of timber. That kinds of buildings were made by the hierarchy of building. Single eaves buildings with Sarae have lower rank than double eaves buildings, and also have higher rank than those without Sarae. And we have to say that lower part of the member is Chunyeo, and upper part of the member is Sarae.

It is difficult to build a hipped and gable roof in slender rectangular type due to restraint in variation of lateral length caused by gongpo arranged on the side, purlin space and the form of gable part and aesthetical effect of chunyeo maru. Against this backdrop and with the assumption that this phenomenon is more apparent in roofs of three-bay-kan Buddhist temples with the hipped and gable roof among national treasure Buddhist temples, this study has aimed to prove that a roof can be built in a less slender rectangular type than that of flat form and to present the building methodology and found the following findings. First, The ratio of lateral to longitudinal length of the roof has been adjusted by protruding the chunyeo and the method of adjusting the ratio of lateral to longitudinal length of the roof is considered to be determined depending on the availability of woods to be used in chunyeo. Second, in order to symmetrically arrange the edge of the roof, which is critical from the perspective of construction morphology, the chunyeo angle has been intentionally adjusted to reduce the gap of length between the front roof and the lateral roof. To sum up, the characteristic of the hipped and gable roof, which is difficult to be built in slender rectangular type, is more clearly shown in the roof and it is identified that the length of the front roof and the lateral roof has been intentionally adjusted to achieve the symmetrical arrangement of roofline of the roof edge.

The purpose of this study is to classify types of the eaves structure of buildings with the Jusimpo-type structure and to analyze the characteristics of each eaves structure. For this objective, forty buildings were selected and investigated. The results of analysis are summarized as follows. First, the main members of framework which handle a load burden on the long-rafter(長椽) are classified as the Jusim-dori(柱心道里) and the Oemok-dori(外目道里). Based on the method of handling a load, the eaves structure is classified into three types; the Jusim-processing-type(柱心中心形), the Oemok-processing-type(外目中 心形), and the Oemok-processing-variant-type(外目中心變異形). The Jusim-processing-type is the set where the internal length of a long-rafter is longer than the length of the eaves on the basis of the center of a column. The Oemok-processing-type is the set where the external length of a long-rafter is longer than the internal length of it. And the Oemok-processing-variant-type is the set where the internal length of a long-rafter is longer than the external length of it, but it is shorter than the length of the eaves which includes the extruded length of a Buyeon(浮椽). Second, the Jusim-processing-type had been generally adopted in the Jusimpo-type structure of the Goryeo Dynasty. But since the 17th century, the Oemok-processing-type had the highest application rate. Third, the change from the Jusimdori-processing-structure to the Oemokdori-processing-structure means that the long-rafter is moved to the direction of outside of the building, and thus the Jung-dori(中道里) is gradually moved to the column center. And, the change of the eaves with the Jusimpo-type structure was not a process for increasing the length of the eaves but a process for adopting the advantages of the Dapo-type structure by changing the arrangement of purlin. Fourth, the change from the Jusimpo-type structure to the Dapo-type structure could be understood as a process for moving the main point for handling a load from the Jusim-dori to the Oemok-dori.

파프리카를 재배하는 농가에서는 생산성 증대를 위하여 비닐하우스 측고를 관행 3.0m에서 4.5m까지 높이고 있으나 이에 대한 구조안전성 검토 없이 시공이 이루어지고 있는 실정이다. 이 연구에서는 측고가 4.5m로 상승된 1-2W형 비닐하우스를 대상으로 풍속 40m·s-1, 적설심 40cm의 설계하중에 대하여 구조안전성 분석을 수행하고 적절한 구조보강방법을 제시하였다. 3차원 프레임해석을 이용하여 구조해석을 수행한 결과, 측면 방풍벽의 보강이 반드시 필요한 상태였으며 파프리카 작물하중으로 인하여 매우 취약해지는 중방의 보강이 요구되었다. 측면 보강 방법으로써는 외측 기둥과 방풍벽을 보강이음을 이용하며 서로 연결해주고, 외측 기둥 간격에 따라 방풍벽 부재를 보강하는 방법이 가장 효과가 큰 것으로 분석되었다. 중방의 경우 비닐하우스 폭의 1/17~1/20의 높이로 2중 중방구조를 만들고 그 사이를 사재로 연결하여 트러스 형태로 보강하는 방법이 가장 큰 효과를 보였다.