In the present study, the effects of electrodes type (copper, steel or CFRP) and design (plate or mesh) on electrical stability of conductive cement as exposed to various weathering conditions were investigated. To fabricate these composites, multiwalled carbon nanotube and carbon fiber were added to the cement composites by 0.6 and 0.4% by cement mass. Seven different types of electrodes were embedded to the samples, and their electrical stability was examined during the curing period. In addition, the fabricated samples were exposed to water ingress and cyclic heating conditions. Then, the compressive strength of the samples was evaluated to observe the interfacial bonding between the cement paste and electrodes. Based on the experimental results, it was found that the samples showed different electrical stability even their mix proportion was same. Thus, it can be concluded that the type and design of the electrodes are important in measuring the electrical properties of the conductive cement composites. Specifically, an improved electrical stability of electrodes is required when they are exposed to various weathering conditions.

본 연구에서는 용액 공정으로 제작된 단분자 기반의 유기 반도체 전계효과 트랜지스터에 적용된 보호막이 유기 트랜지스터의 전기적 안정성에 미치는 영향에 대해여 살펴보았다. Solvay社에서 제공한 용액 공정형 유기 단분자 반도 체를 채널로 사용하여 제작한 유기 트랜지스터는 약 1 cm2/Vs의 상대적으로 높은 이동도를 보였으며, 대략 2.5 ~ 20 k Ωcm 범위의 낮은 접촉저항을 가진 것으로 측정되었다. 무엇보다 중요한 것은, 제작한 유기 트랜지스터에 불소원자가 함유된 Hyflon AD를 보호막으로 적용하였을 때, 보호막을 적용하기 전에 비해 훨씬 더 향상된 전기적 안정성을 보였 다. 이는 불소원자가 함유된 Hyflon AD 고분자막이 대기 중의 수분을 효과적으로 차단하기 때문으로 추측된다.

A metallic oxide layer of a heat-resistant element contributes to the high-temperature oxidation resistance by delaying the oxidation and has a positive effect on the increase in electrical resistivity. In this study, green compacts of Fecralloy powder mixed with amorphous and crystalline silica are oxidized at 950oC for up to 210 h in order to evaluate the effect of metal oxide on the oxidation and electrical resistivity. The weight change ratio increases as per a parabolic law, and the increase is larger than that observed for Fecralloy owing to the formation of Fe-Si, Fe-Cr composite oxide, and Al2O3 upon the addition of Si oxide. Si oxides promote the formation of Al2O3 and Cr oxide at the grain boundary, and obstruct neck formation and the growth of Fecralloy particles to ensure stable electrical resistivity.

In order to improve the high-temperature oxidation stability, sintered 434L stainless steel is studied, focusing on the effect of the addition of metallic oxides to form stable oxide films on the inner particle surface. The green compacts of Fecralloy powder or amorphous silica are added on STS434L and oxidized at 950oC up to 210 h. The weight change ratio of 434L with amorphous silica is higher than that of 434L mixed with Fecralloy, and the weight increase follows a parabolic law, which implies that the oxide film grows according to oxide diffusion through the densely formed oxide film. In the case of 434L mixed with Fecralloy, the elements in the matrix diffuse through the grain boundaries and form Al2O3 and Fe-Cr oxides. Stable high temperature corrosion resistance and electrical resistivity are obtained for STS434L mixed with Fecralloy.