국내 발생 암모니아 중 가축분뇨의 기여율이 높은 것은 자명한 사실이다. 암모니아 배출량 산정 과정의 정확도와 신뢰도 향상을 위해서는, 가축분뇨 발생량의 정확한 집계, 가축분뇨의 퇴비화 및 액비화 과정에서 단계별 암모니아 전환량과 발생량 산출, 퇴액비의 저장 및 운송과정에서의 암모니아 발생량 산정 그리고 토양 살포 과정과 방법에 따른 암모니아 발생량 비교 연구가 반드시 수행되어야 할 것이다. 미국과 유럽과 비교해 볼 때, 특히 국내 배출계수가 상대적으로 매우 획일적이고 시공간적으로 세분화되지 못해 국내 실정을 충분히 반영하지 못하고 있다. 암모니아 배출계수 산정의 정확도와 전문성을 향상 시킬 수 있는 방안으로, 퇴액비의 특성, 토양의 특성 그리고 기후 특성의 복합적인 고려가 가능한 챔버시스템을 활용할 수 있을 것이다. 국내외 암모니아 배출과 관련한 자료의 검토와 비교를 통해 현재 국내 시스템의 부족한 점과 나아가야할 방향을 확인할 수 있었으며, 암모니아 배출유량 산정이 가능한 챔버 시스템을 제언하였다. 향후 누락배출원의 신규 배출계수 산정과 같은 실질적인 정책과의 연계를 위해서는 실내의 챔버 시스템에서 더 나아가 현장에서의 mesocosom 시스템의 방법론 구축 또한 필요할 것으로 판단된다.

The purpose of this study is to improve the ammonia (NH3) emission inventory estimation in the domestic CAPSS (Clean Air Policy Support System). Currently, the ammonia emissions rate is obtained by multiplying the activity (number of livestock) by emission factors. The amount of movement and treatment are not considered in the estimation of ammonia emission rates. However, livestock manure is currently moved and treated in accordance with the energy recycling policy. In this study, the new emission estimation method were suggested considering the moving and treatment characteristics of livestock manure. A new ammonia emissions was calculated for Bcity and Y-gun at Chungcheongnam-do province. It was shown that the moving and treatment ratio of ammonia emissions were 4.3% and 8.4%, respectively. Furthermore, this ratio would be increased rapidly with the continuous establishment of large-scale manure treatment facilities.

This paper attempted to estimate the emissions of HFC-134a from scrap truck as a result of measuring the residual quantities of HFC-134a in air conditioner of scrap truck. We measured the residual amounts in the scrap truck of 138 by applying commercial recover for refrigerants. The average residual rate(disposal-phase emission factor) is reported to be 44.3±3.3% within a confidence interval of 95%. Recent year model trucks exhibit the higher residual rates. Little variation, however, is observed in regard to vehicle size. The HFC-134a emission quantity from scrap truck in 2011 is estimated to be 55,908 tCO2-eq that demonstrates 21.4% increase to compare with that in 2007. As the numbers of truck have increased dramatically during the last two decades, the emissions of HFC-134a from scrap truck would increase sharply in the next coming years. HFC-134a is a very high GWP greenhouse gas. therefore have to reduce the emissions from the scrap truck and need to find ways to recycle. The chemical compositions of refrigerants from scrap truck are quite similar to those of new refrigerants, suggesting that the refrigerants from scrap truck could be reused as refrigerant.

This paper attempted to estimate the emissions of HFC-134a from scrap passenger vehicles as a result of measuring the residual quantities of HFC-134a in scrap vehicles. We measured the residual amounts in the scrap passenger vehicles of 196 by applying commercial recover for refrigerants. The average residual rate is reported to be 61.2 ± 2.4% with a confidence interval of 95%. As expected, the higher residual rates are shown for recent models. Little variation, however, is made with vehicle size. The HFC-134a emission quantity from scrap passenger vehicles in 2011 is estimated to be 326,236.83 tCO2 eq that demonstrates 53% increase to compare with that in 2007. As the numbers of passenger vehicles have increased dramatically during the last two decades, the emissions of HFC-134a from scrap passenger vehicles would increase sharply in the next coming years. The chemical compositions of refrigerants from scrap passenger vehicles are quite similar to those of new refrigerants, suggesting that the refrigerants from scrap passenger vehicles could be reused.