Molten Salt Reactor, which employs molten salt mixture as fuel, has many advantages in reactor size and operation compared to conventional nuclear reactor. In developing Molten Salt Reactor, the behavior of fission product in operation should be preliminary evaluated for the correct design of reactor and its associated system including off-gas treatment. In this study, for 100 Mw 46 KCl- 54 UCl3 based Molten Salt Reactor with operating life time of 20 year, the fission product behavior was estimated by thermodynamic modeling employing FactSage 8.2. Total inventory of all fission product were firstly calculated using OpenMC code allowing depletion during neutronic calculation. Then, among all inventory, 46 element species from Uranium to Holmium were chosen and given to the input for equilibrium module of Factsage with its mass. In phase equilibrium calculation, for the correct description of solution phase, KCl-UCl3 solution database based on modified quasichemical model in the quadruplet approximation (ANL/CFCT-21/04) was employed and the coexisting solid phase was assumed to pure state. With the assumption of no oxygen and moisture ingress into reactor system, equilibrium calculation showed that 1% of solid phase and of gas phase were newly formed and, in gas phase, major species were identified : ZrCl4 (47%), Xe (33%), UCl4 (14%), Kr (5%), Ar (1%) and others. This result reveals that off-gas treatment of system should account for the appropriate treatment of ZrCl4 and UCl4 besides treatment of noble gas such as Xe and Kr.

In KAERI, the nuclide management technology is currently being developed for the reduction of disposal area required for spent fuel management. Among the all fission products of interest, Cs, I, Kr, Tc are considered to be significantly removed by following mid-temperature and high-temperature treatment, however, a difficulty of spent-fuel thermal treatment experiment limits the development of such thermal treatment. In this study, we applied our previously developed two-stage diffusion release model coupled to UO2 oxidation model to the development of optima thermal treatment scenario. Since the formation of cesium pertechnetate should be avoided and the fission release behavior is considerably affected by the extent of oxygen, we obtained oxygen-content dependent model parameters for two-stage fission release model and applied the model to the evaluation of fission release behavior to different oxygen content and thermal treatment procedure. It was found that the developed fission release model closely describes the experimental behavior of fission product of interest, implying a validity of model prediction and the thermal treatment condition reducing the chemical reaction between cesium and technetium could be developed.