A two-hour fire-resistance PC hollow slab for residential use was developed to secure structural and fire-resistance performance and to be applied to the general building and apartment housing markets. Compared to the existing hollow slab, in order to secure the same or better structural performance and economic feasibility by reducing the quantity, it was attempted to secure the fire resistance performance by reducing the concrete filling rate in the cross section and adjusting the thickness of the upper and lower flanges by optimizing the hollow shape in the cross section of the slab. For structural performance evaluation, experiments were performed on PC hollow slabs by varying the member thickness and the presence or absence of overlaid concrete, and all of the experimental results showed that the design strength was sufficiently exhibited and that stability during construction was possible. The developed synthetic PC hollow slab has secured fire resistance and residential performance so that it can be applied to all buildings, and it is intended to be immediately applied to the field.

Recently, a market of architecture is requiring buildings of long spanned structures as most buildings become taller and larger. For being long spanned structures, elements of buildings must be light. As an alternative proposal, various hollow-core slabs and flat plate salbs were developed and used frequently in the inside and outside of the country. But the study of the hollow-core slabs using deck plate and assembly of light weight is the first. In the present study, Flexural and vibration tests were performed on the hollow-core slabs using deck plate and assembly of light weight to investigate the flexural behavior and serviceability. Four test specimens were used for test parameters; one hollow-core slab with an assembly of light weight, and three hollow-core slabs with deck plate and an assembly of light weight. The test parameters also included amount of tension bar and existence of shear reinforcement. The test results showed that the hollow-core slabs with deck plate and an assembly of light weight had a crack of shear, so shear reinforcement must be conducted.

중공슬래브는 휨 성능에 영향을 미치지 않는 부분의 콘크리트 단면을 삭제하고 중공재로 치환함으로써 중공재 부피만큼 콘크리트가 줄어들어 자중 감소효과를 가져오는 장점이 있다. 또한, 콘크리트의 물량절감뿐 아니라 친환경적 측면에서 이산화탄소의 배출도 저감할 수 있어 효과적이다. 하지만, 중공재로 치환한 부분의 지압강도가 명확하지 현장 적용 시에 여러 가지 문제점이 발생한다. 이에 본 연구에서는 중공재가 포함된 중공슬래브를 제작하여 각 타입별(트럭 하중 적용 시, 동바리 하중 적용 시 및 잭 서포트 하중 적용 시)로 국부지압강도 실험을 수행하여 중공슬래브 국부 지압강도의 안전성을 평가하고자 한다. 트럭하중 적용 시, 동바리 하중 적용 시 및 잭 서포트 하중 적용 시의 실험결과 중공재 연결부위 및 중공재 상부의 지압강도는 모든 실험체에서 허용 하중 이상을 보유한 것으로 나타났다. 또한 데크 적용 유무에 따른 실험결과도 모두 허용 하중을 초과하여 안정성을 확보하는 것으로 나타났다.

The purpose of this study is to get a more precise frequency of hollow core slabs by comparing the observed values from the actual free vibration tests and the predicted values based on the analysis model. The actual free vibration tests were carried out in the construction field using Ω shaped hollow core slabs. Modal analysis is conducted based on the analysis model that takes into account the differences in section properties due to void parts of slab. The differences between the predicted values based on the modal analysis with analysis model and the measured data from the actual tests range from 2~7%. This study demonstrates that the analysis model that incorporates void parts of slab could be used in evaluating serviceability of hollow core slabs with reasonable accuracies.

The objective of this study is about hollow core slab with GFRP (Glass Fiber Reinforced plastics) Reinforcing bar instead of using deformed bar. This experiment is planed because using GFRP Reinforcing bar instead of tension bar in existing RC hollow core slab will improve not only on the constructability but also on the durability by solving the corrosion of slab. As the result of the experimental study, GFRP Reinforcing bar and additional deformed bar appear to be superior compared to RC hollow core slab in structural ability.

The purpose of the paper is to evaluate the serviceability of two-way hollow core slab with the distinguishingly donut shaped hollow named as GB-SLABTM(Green Ball based lightweight biaxial concrete SLAB) developed by Samsung and patented internationally. One of engineering issues in the long-span concrete slab structure is definitely how to evaluate the long-term deflection considering the cracked section. To evaluate the long-term deflection of GB-SLAB, the immediate deflection after concrete form removal is measured and then the long-term cracked deflection is predicted using finite element analysis