In this paper, the expert system to reduce the amount of food waste is proposed. The method of material flow analysis (MFA) is applied. Proper handling of waste beyond the terms of the need for proactive research been mentioned before, but actually cause the waste generator research focuses on consumer behavior and the business community to analyze the flow of materials within the study are insufficient . In this paper, the type of food consumption and food waste, look at the relationship between the occurrence of secondary schools in the diet is provided for students to examine the preferences of the target model diet expert system was reconfigured . Preference for leaving the food in the diet leads to the important information that is Each diet recipes that make up the target material flow analysis (MFA) was constructed to perform all the database . This database is currently being generated from the rain while cooking diet edible plants and materials to reflect the self-esteem following the recommended diet is used to create . Reducing food waste is actually being used currently in research knowledge to the knowledge base was constructed . Future Home Smart System was developed in conjunction with the system to the user , by providing guidelines for the utilization can be expected.

In this study, the recycling processes of construction and demolition waste (C&D waste) were analyzed, and its national recycling rate was determined using material flow analysis (MFA). Available statistical data provided by Ministry of Environment and Korea Environment Corporation were used for the MFA study. The collected data were carefully examined and validated by field investigations. System boundary for MFA covered from waste generation from construction sites to final disposal in 2013. The field investigation showed that recycled aggregate is produced through mechanical shredding, separation, and screening processes of C&D waste. The production efficiency (or process yield) was estimated to be approximately 81.2% on average. The foreign materials in the waste accounted for 18.8% by weight. The separated impurities were sent to recycling facilities, incineration facilities, or landfill sites, depending on the physicochemical characteristics. Efficiency of recycling facilities and the statistical data were integrated to estimate the national actual recycling rate, which turned out to be 87.7% in 2013. Approximately 49.1% of the construction-related waste was recycled as recycled aggregate for concrete production and road base layer for asphalt pavement. Based on the result of MFA, there is 9.8% difference between the actual recycling rate in this study and reported recycling rate by national statistics. In the future, more various C&D waste treatment and disposal facilities, along with aggregate recycling facility, should be investigated to verify the actual recycling rate determined by this study. Statistical accuracy should be further refined through additional field investigations. Our findings can be applicable to development of recycling policies and best management practices for C&D waste streams.

The purpose of this study is to analysis the materials flow of steel cans from producing to discarding, finding problems in materials flow diagram in performance recycling of steel cans, and improvement ways for relevant systems and policies. Through supply various statics in KECO, it was found that the amount of steel calculated in Korea is 80,555 thousand tons. This amounts is reused from steel scrap of 35,143 thousand tons. After that producing steel was manufactured to steel plate, and manufactured steel plate produced steel cans of 273 thousand tons. The steel cans of 103.2 thousand tons was released in Korea. The 89.5 thousand tons of wastes for recycling was 86.8% for total of 103.2 thousand tons for recycling. The amount of recycling was assumed that there is no loss in collection, sorting and packing stage. According to such studies, a materials flow diagram was drafted and the problems in recycling for each stage were reviewed. In consequence plan to improve consist of materials and structure in cans in production stage, plans to restrict inclusion of foreign particles in discardment and selection section, plan to provide different support in funding and granting quality ratings in the sorting and compression section was suggested.

This paper presents the estimation of actual recyclable amounts and the evaluation of waste oil recycling processes atrecycling facilities using material flow analysis (MFA). The estimation of actual recycling rates through the processes ofwaste lubricating oils is a very important subject not only in the point of view oil recycling efficiency by energy conversionprocesses but also in the perspective of the recycling technology level. In this study, the recycling processes and recyclingrates of waste lubricating oil recycling facilities were evaluated by using a MFA approach, a total of 10 site visits anda total of 30 site questionnaires in Korea. The MFA methodology based on mass balance approach applied to identifythe inputs and outputs of waste oils during the recycling processes at waste oil recycling facilities. It is necessary todetermine the composition and flows of the input materials to be recycled and foreign substances in a waste recyclingfacility. A complete understanding of the waste flows in the processes along with the site visit and data surveys for therecycling facilities was required to develop a material flow for the processes and determine the process yield by differenttreatment methods (chemical distillation, vacuum distillation and high temperature pyrolysis). The results show that onaverage the process yields for chemical distillation, vacuum distillation, and high temperature pyrolysis were 89.9±7.7%,77.9±16.1%, and 57.9±9.3%, respectively. During the chemical distillation method, water in waste oils was a majorfraction (>50%), while the vacuum distillation method resulted oil large amounts of oil sludge produced during therecycling process. The process yields for different treatment methods depended upon several factors including the qualityof incoming waste oils, the type and operating conditions of recycling processes that are applied to. Based on the materialflow analysis in this study, the actual recycled amount of waste oil was estimated to be approximately 260,809 ton in 2011.

There are many stringent environmental regulations on the management of waste electrical and electronic equipments(WEEE) in most developed countries. WEEE directive aims at increasing collection and recycling rate of WEEE whereas,while the restriction of the use of certain hazardous substances (RoHS) aims at restricting hazardous materials duringthe production of electrical and electronic equipment (EEE). TV housing rear covers consist of small portion of brominatedflame retardants (BFRs). Improper management and disposal of such waste can pose impacts on the environment andhuman health. In Korea, there are very few available statistical data regarding BFRs levels in TVs housing rear covers.In order to provide additional measures related to management of BFRs, there is a need for a quantitative material flowstudy on the amount of BFR found in TVs. This can be achieved by the aid of material flow analysis of the TV setsand by studying the Deca-BDE components present in the TV housing read covers. In this study, the relevant data werecollected from the statistical reports and through field site visits to the WEEE recycling facilities with surveys. Staticand dynamic material flow analysis (MFA) was conducted to determine material flow of BFRs (Deca-BDE) in themanagement of waste TVs. According to this study, in 2011, households in Korea use 73,821ton of TV sets of which23,592ton of waste TV sets were collected and recycled by municipalities and producers. Extended ProducerResponsibility (EPR) played a major role in recycling of WEEE. In this study, it was predicted that Deca-BDE in usestage would reach down to 51.73ton by 2016. In addition, the amount of Deca-BDE present at the disposal and recyclingstage is estimated to be approximately 2.45ton by 2018.