PURPOSES : This purpose of this study is to analyze the effect to autogenous shrinkage of the top-layer material of a two-lift concrete pavement mixing both silica fume and polymer powder. METHODS: The bottom-layer of a two-lift concrete pavement was paved with original portland cement (OPC) with a 20~23 cm thickness. Additionally, the top-layer which is directly exposed to the environment and vehicles was paved with a high-performance concrete (HPC) with a 7~10 cm thickness. These types of pavements can achieve a long service life by reducing joint damage and increasing the abrasion and scaling resistance. In order to integrate the different bottom and top layer materials, autogenous shrinkage tests were performed in this study according to the mixing ratio of silica fume and polymer powder, which are the admixture of the top-layer material. RESULTS: Autogenous shrinkage decreased when polymer powder was used in the mix. Contrary to this, autogenous shrinkage tended to rise with increasing silica fume content. However, the effects were not significant when small amounts of polymer powder were used (3% and 11%). CONCLUSIONS : The durability and compressive strength increase when silica fume is used in the mix. The flexural strength considerably increases and autogenous shrinkage of concrete decreases when polymer powder is used in the mix. As seen from above, the proper use of these materials improves not only durability, but also autogenous shrinkage, leading to better shrinkage crack control in the concrete.

본 연구에서는 메탄 대향류 확산 화염내 탄소나노튜브의 합성에 대하여 실험 및 수치적 연구를 수행하였다. 아세틸렌을 일정비율로 메탄에 혼합하여 연료 가스로 사용하였으며, 탄소나노튜브의 합성을 위한 촉매로서 페로센이 이용되었다. 주요 인자로는 메탄 연료에 대한 아세틸렌의 혼합비율이며, 2 %, 6 %, 10 %로 혼합하였다. 탄소나노튜브를 채취한 그리드 위의 탄소나노튜브 합성 특성은 SEM 이미지로 분석되었다. 수치해석에서 화학반응 메카니즘으로는 GRI-Mech 3.0 이 적용되었다. 수치결과로는 아세틸렌 혼합 비율이 증가할수록 화염 온도도 증가하며 CO 몰분율도 증가하는 것을 알 수 있다. 실험결과로는 2% 아세틸렌 혼합 화염이 6 % 및 10 % 혼합 화염과 비교해 탄소나노튜브 합성이 잘 이루어졌음을 알 수 있었다. 이것은 6 % 및 10 % 아세틸렌 혼합화염의 경우 과도한 카본 소스의 생성이 발생해 오히려 화염 내 카본소스가 촉매입자로의 공급을 방해하기 때문이라 생각한다. 이 결과로부터 양호한 질의 탄소나노튜브 생성을 위해서는 적정한 양의 카본소스가 생성되어야 한다는 것을 알 수 있었다.

팽이버섯 생산비용을 절감하기 위하여 한번 사용한 배지의 적정 혼합비율을 구명하고자 시험한 결과는 다음과 같다. 팽이버섯 재배 배지재료로 미송톱밥, 1회 팽이버섯 재배에 사용한 톱밥, 콘코브 그리고 영양원으로 미강과 밀기울을 이용하여 14가지로 배지를 조성하여 균사배양기간, 자실체 수량과 품질을 조사하였다. 두 가지 영양원에 따라 배양기간은 큰 차이가 없었지만 유효경수, 자실체 수량과 품질은 밀기울보다 미강이 좋았다. 폐배지를 20% 혼합한 처리 즉 미송톱밥 60%+폐배지 20%+미강 20% 배지가 관행처리 미송톱밥 80%+미강 20% 배지와 품질은 비슷하며 수량은 142.2g 으로 관행의 130g 대비 10% 증수하였다. 그러나 폐배지 혼입량이 증가함에 따라 자실체의 품질과 수량이 현저하게 감소하였다. 따라서 폐배지의 적정 혼합량은 20%이며 수량도 10% 증가하였다.

This study was carried out to compare the cooking and antioxidant characteristics of rice containing varying amounts of glutinous rice and cooked by two methods. Rice containing glutinous rice was cooked by general and high-pressure cooking methods with and without fermented alcohol. Pasting characteristics of cooked rice were decreased with increasing amounts of glutinous rice. The water binding capacity and swelling power were significantly decreased with increasing amounts of glutinous rice; however, water solubility indices were significantly increased. Palatability characteristics of cooked rice containing glutinous rice were similar to those of cooked rice without glutinous rice. Total polyphenol contents of cooked rice containing glutinous rice and fermented alcohol were quite different, but this difference was not significant. Total flavonoid contents were increased with increasing amounts of glutinous rice. Total flavonoid content by general cooking method for rice containing 20% glutinous rice and fermented alcohol was 23.20 ± 0.61 μg CE/g. DPPH radical-scavenging activities for samples with and without glutinous rice were 2.97–5.19 and 3.19–5.45 mg TE/100 g, respectively. ABTS radical-scavenging activity by high-pressure cooking method for rice containing 20% glutinous rice and fermented alcohol was 19.48 ± 0.63 mg TE/100 g. In this study, cooking and antioxidant characteristics of cooked rice containing glutinous rice generated data useful for manufacturing processed products.