This study investigates the enhancement of surface precision and dimensional accuracy in STS 316L oval pipes through the application of magnetic abrasive finishing. The experiment involves the modification magnetic pole shapes(A, B, C, D) and a comprehensive analysis of their impact on surface quality. Key parameters include magnetic abrasive KX#320, iron powder, aluminum oxide, light oil, a test specimen rotating at 600rpm, and periodic injection of polishing liquid, a permanent magnet Nd-Fe-B, and magnetic pole steel 1018, reciprocating distance 20mm, and a feed rate 1mm/sec over a 32minutes duration with measurements every 4minutes. The results demonstrate significant variations in surface quality based on magnetic pole shape, with specific configurations demonstrating superior precision and smoothness from the initial surface 0.32μm to 0.06μm.

There is a growing concern on the improvement of water distribution pipeline for multi-regional water supply system in Korea along with its aging infrastructure. Rehabilitation of large diameter pipeline is more efficient in cost and time compared to replacement with trenching. The procedure for rehabilitation are diagnosis, cleaning, spraying coating material, and final inspection. The internal state of pipeline was carefully diagnosed and got C grade, which required rehabilitation. We found that 17,274,787,000 Korean won could be saved after pipe surface coating because of increased C coefficient of Hazen-Williams equation. Optimal coating material was D polyurea. We also found optimal distance between spraying nozzle and pipe wall to be 70 - 80 cm, which were critical factors for coating quality. This study also illustrated the time for spray drying to be more than 30 min. These results could be used in the quality control process during rehabilitation of aged pipelines.

본 연구에서는 이방성 재료로 구성된 파형 관로의 좌굴 거동을 분석하였으며, 좌굴거동에 영향을 미치는 변수로서 파형의 높이와 길이, 암거의 직경과 두께가 고려되었다. 또한 이방성 재료의 특성을 고려하여, 길이방향의 강성과 원주방향의 강성도 함께 좌굴거동에 영향을 미치는 인자로서 고려되었다. 다양한 형상의 파형 관로에 대해 유한요소해석을 수행하여 매개변수연구를 하였으며, 유한요소해석 결과를 바탕으로 이방성 재료로 구성된 파형 관로의 좌굴강도를 추정할 수 있는 간략식을 제안하였다. 해석결과, 파형 관로는 일반적인 평탄한 관로에 비해 우수한 좌굴강도를 보였으며, 제안식 또한 유한요소해석 결과에 근접하는 좌굴강도를 보여주었다.