Cross model correlates the dynamic complex viscosity of polymer systems to zero complex viscosity, relaxation time and power-law index. However, this model disregards the growth of complex viscosity in nanocomposites containing filler networks, especially at low frequencies. The current paper develops the Cross model for complex viscosity of nanocomposites by yield stress as a function of the strength and density of networks. The predictions of the developed model are compared to the experimental results of fabricated samples containing poly(lactic acid), poly(ethylene oxide) and carbon nanotubes. The model’s parameters are calculated for the prepared samples, and their variations are explained. Additionally, the significances of all parameters on the complex viscosity are justified to approve the developed model. The developed model successfully estimates the complex viscosity, and the model’s parameters reasonably change for the samples. The stress at transition region between Newtonian and power-law behavior and the power-law index directly affects the complex viscosity. Moreover, the strength and density of networks positively control the yield stress and the complex viscosity of nanocomposites. The developed model can help to optimize the parameters controlling the complex viscosity in polymer nanocomposites.

The transformation of the liquid crystal complex made by binding of anionic surfactant, sodium dodecyl sulfate (SDS), into high charge density cationic polymer, the homopolymer of diallyldimethylammonium chloride (PDADMAC) was induced by adding of nonionic surfactants and investigated by means of microscopy and FE.SEM. Among nonionic surfactants in this experiments polyethylene glycol (3 mol) ether of lauryl alcohol (laureth-3) made variation in the complex. The laureth-3 transformed the complex into spherulite vesicle with the size of ca.100μm. This change increased the viscosity and the turbidity of the solution phase separated originally. Microscope showed that they are spherulite particles and polarized microscope suggested they are multi.lamellar liquid crystals. FE-SEM also proved that explicitly.

Titanium dioxide was prepared by Polymer Complex Solution Method(PCSM) according to the mole ratio of Titanium (IV) isopropoxide(TTIP)/solvent and polymer(Poly Ethylene Glycol). Polymer electrolytes were usually made by dispersing preproduced ceramic nanoparticles in a polymer matrix. Using this method, pure and nano-sized powder was synthesized through a simple procedure and polymer entrapment route. At the optimum amount of the polymer, the titanium ions are dispersed in solution and a homogeneous polymeric network is formed. The maximum intensity of anatase phase of was achieved by calcining at for 2h. The synthesized powders were nano-sized and the average size was about 50nm. Anatase/Rutile ratio of the synthesized was 70%/30%

본 연구에서는 샴푸에 널리 사용되는 양이온성 폴리머 중, 양이온성 구아 폴리머를 선택적으로 사용하여, 다양한 성능평가를 통해 0.7 % 질소함량 이상의 치환도와 190 ~ 200 cps사이의 점도를 가지는 새로운 양이온성 구아 폴리머를 개발하였다. 성능평가로는 헹굼 시 모발 부드러움(Wet combing ability), 폴리머의 잔존정도와 실리콘의 흡착정도를 측정하였으며 최종적으로 관능평가를 실시하였다. 본 연구에서 개발된 양이온성 구아 폴리머를 배합하면 샴푸 사용감을 최적화할 수 있을 것이다.