In this study, a composite material based on agricultural waste coconut shells was successfully developed as an efficient, lightweight, and sustainable electromagnetic wave (EMW) absorber. Specifically, coconut shells were used as the raw material, and a simple one-step activation charring process was employed to obtain coconut shell porous carbon (CSPC). ZnFe2O4 with a hollow spherical structure was then in situ grown on the surface of CSPC, resulting in a special ZnFe2O4/ CSPC composite material. Due to its unique hollow structure, porous characteristics, and heterogeneous interfaces, the composite material achieved optimized impedance matching, leading to excellent EMW absorption performance. The fabricated ZnFe2O4/ CSPC composite demonstrated a minimum reflection loss ( RLmin) of − 37.32 dB at 10.80 GHz and an effective absorption bandwidth of 2.40 GHz at a thickness of only 2.0 mm. SEM and TEM analyses confirmed that the composite possessed a hollow and porous structure, while the BET specific surface area was measured at 133.709 m2 g⁻1. Based on the synergistic effects of ZnFe2O4 and CSPC, dielectric losses, magnetic losses, and impedance matching, the potential EMW absorption mechanisms were proposed. The ZnFe2O4/ CSPC composite material prepared in this study was a novel, green, and sustainable EMW absorber.

With high redox activity, superior conductivity, abundant pores, and large specific surface area, nitrogen-doped graphitic carbon featuring a hierarchically porous structure is regarded as ideal electrode material for supercapacitors. In this work, hierarchically porous nitrogen-doped graphitic carbon (PG-PZC50) was fabricated via non-solvent induced phase separation and high-temperature calcination processes. SEM images showed its three-dimensional network structure, with abundant macro- and mesopores distributed throughout. XRD and Raman spectra confirmed the phase purity and graphitic nature of the as-prepared material, while XPS revealed its surface elemental composition, especially the content and doping states of nitrogen atoms. The graphene oxide-induced three-dimensional network, combined with the mesoporous structure of metalorganic framework-derived N-doped carbon particles, creates abundant migration channels and a large adsorption surface area for the electrolyte ions. Benefiting from its hierarchically porous structure and high nitrogen-doping content, the formed PG-PZC50 reached high specific capacitances of 499.7 F g− 1 at 0.1 A g− 1 and 179.6 F g− 1 at 20 A g− 1. Notably, the material also demonstrated robust cyclic stability with no capacitance loss after 10,000 charge–discharge cycles. The proposed synthetic strategy provides new ideas for the facile and reproducible construction of nitrogen-doped graphitic carbon with 3D hierarchically porous structure and high capacitive performances.

Porous carbon derived from biomass represents pivotal electrode materials for electric double-layer capacitors (EDLCs). However, their applications are limited by the low pore utilization and low withstanding voltage (< 2.7 V), which largely hinder the energy density (Eg) of SCs. In this study, fulvic acid-derived porous carbons (FPs) were synthesized through the self-assembly and KOH activation strategy by employing fulvic acid (FA) as the precursor and cationic surfactant PDDA as the soft template. The electrostatic forces between FA and PDDA enable the structural orientation of FA, leading to the formation of stable layered liquid microcrystals. Besides, under the activation process, the decomposition of PDDA contributes to the interconnected pores in FPs. Thus, the obtained sample FP1 exhibits a high specific surface area (2593 m2 g− 1) and high mesopore ratio (48%). Moreover, low oxygen content and stable surface composition promote the withstanding voltage of FPs. In the TEABF4/ PC electrolyte, the sample FP1 is capable of a high voltage of 3.0 V, high-rate capability C10/0.05 of 76.3%, and high energy density of 39 Wh kg− 1.

A hierarchical porous carbon/silicon composite material (CSCM) was prepared through KOH activation and acid leaching using coal gasification fine slag (CGFS) as the raw material. The KOH dosage, activation temperatures, and HCl acid amount were optimized. The obtained CSCMs showed higher pore volume in the range of 0.62–0.96 cm3/ g, and hierarchical porous structure with Vmicro./ Vmeso. ratio in the range of 1.54–3.31. The influence of Vmicro./ Vmeso. ratio of CSCM on CO2 adsorption at 0 °C was higher than that at 25 °C. Under higher specific area and pore volume, hierarchical pores with Vmicro./ Vmeso. ratio in the range of 2.81–2.91 were benefit for CO2 adsorption at 0 °C. The optimized CSCM demonstrated excellent CO2 adsorption capacities of 2.96 and 4.60 mmol/g at 25 and 0 °C, respectively. CO2 adsorption on CSCM was a heterogeneous physical process, and the cycle stability was excellent. Meanwhile, CSCM was mixed with Fe-based catalyst (Fe-K/CS) for CO2/ H2 catalysis. The hierarchical porous structure of CSCM improved the CO2 adsorption and H2 adsorption around the active sites, promoting CO2 conversion. The combination method of Fe-K and CSCM affected the distribution of CO2 hydrogenation products, and reasonable Vmicro./ Vmeso. ratio in CSCM effectively inhibited C–C chain growth, leading to higher olefins selectivity. The Fe-0.1K/CS-P catalyst achieved a CO2 conversion rate of 21.6% and a C2 =-C4 = selectivity of 47.7%. This study presented a promising approach for effectively utilizing CO2 and for the sustainable valorization of industrial solid waste.

Rapid accumulation of waste tires from automobile industries across the globe poses significant environmental challenges due to their non-biodegradability, complex chemical composition and current disposal techniques. Thus, there is an urgent need to consider recycling and transformation of these waste tires into functional materials while promoting the circular economy and environmental sustainability. Recent advancements in material science research have highlighted the potential of converting waste tires into valuable porous carbon materials based on their rich carbon polymeric composition. Among the various conversion techniques, carbonization and activation have been shown to yield microporous, mesoporous and macroporous carbon with a large specific surface area up to 2450 m2g− 1 with doped heteroatoms (P, B, N and O) that enhances its surface chemistry in diverse applications. Thus, this review looks to investigate various processes involved in converting waste tires into high-performance porous carbon for electrocatalysis, adsorbents, catalyst support, and electrodes for energy storage devices. It also highlights the recent trend of tire compositions, tire chemistry in terms of vulcanization and devulcanization towards a greener economy. Additionally, it proposes future research directions to enhance the viability of waste tire-derived porous carbon materials.

Capacitive deionization (CDI) represents a novel technology for the desalination and purification of seawater. Selecting the appropriate electrode material is crucial, with carbon electrodes frequently employed owing to their high specific surface area, extensive porous structure, and environmentally sustainable nature. This study presents a nitrogen-doped porous carbon, derived from household waste, which demonstrates outstanding electrochemical and desalination performance. The purified chitosan was mixed with a specific ratio of CaCO3 and carbonized at 800 °C to produce chitosan porous carbon (CPC-T). To verify the role of the templating agent, its performance was compared with chitosan porous carbon (CPC) prepared by direct carbonization. CPC-T possesses more mesoporous structures (31.25%), shortening ion transport pathways and significantly enhancing charge transfer rates. The nitrogen-rich doping (8.65 at%) provides numerous active sites and excellent conductivity, making it highly appropriate for capacitive deionization applications. Compared to CPC prepared without a templating agent, CPC-T has a higher specific capacitance (101.5 F g− 1 at a scan rate of 2 mV s− 1) and good cycling stability. The CDI cell made from it exhibits a salt adsorption capacity (SAC) of 25.8 mg g− 1 for 500 mg L− 1 NaCl solution at an applied voltage of 1.4 V, retaining 88% capacity after 50 adsorption–desorption cycles, demonstrating excellent desalination regeneration performance. Additionally, among different concentrations of salt solutions, the CPC-T material shows the best desalination performance for the test solution at a concentration of 500 mg L− 1. For different solute ions, the CDI cell with this material as the electrode exhibits excellent desalination performance for Ca2+, with a SAC value of up to 34.02 mg g− 1. This is a self-doped porous carbon material that significantly outperforms traditional carbon-based materials.

Incorporation of pseudocapacitive materials into porous carbon is a promising strategy to boost electrochemical performance. Herein, composite of biomass-derived porous carbon and MnO2 (a typical pseudocapacitive material) was facilely fabricated through an in-situ synthesis approach with sorghum seeds derived porous carbon (SSC) as the skeleton for MnO2 deposition. The as-prepared composite ( MnO2@SSC) exhibits hierarchical porous structure with abundant interlaced MnO2 nanowires wrapping on the surface. While the porous structure is beneficial to the active sites exposure and electrolyte ions transport, the interlaced three-dimensional (3D) network of MnO2 nanowires significantly boosts the tolerance toward volume shrinkage/expansion during the cyclic process. Consequently, the MnO2@ SSC-based electrode delivered quite promising supercapacitive performance including superior specific capacitance of 482.7 F/g at 0.5 A/g, outstanding long-term cycling stability (95.8% specific capacitance retention after 20,000 cycles) and high energy density of 13.7 Wh/kg at power density of 298.1 W/kg. Furthermore, all-solid-state flexible supercapacitor based on MnO2@ SSC can be facilely bent to various angles (0° to 150°) without significant degradation in the capacitive performance. This study provides a facile, cost-effective, and sustainable approach for the fabrication of high-performance electrode materials.

The high value-added utilization of traditional coal resources is one of the important ways to achieve the strategic goals of carbon peaking and carbon neutrality. Simultaneously, coal-based carbon materials, noted for their cost-effectiveness, superior conductivity, and inherent stability, are emerging as promising candidates for next-generation capacitor technologies. This research presents a series of coal-derived porous carbon by pyrolysis using low rank lignite as raw material and KOH as activator, which are employed in symmetrical supercapacitors filled with liquid electrolytes. The physicochemical properties of the as-prepared electrode materials are characterized by means of scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and their supercapacitive performance are evaluated through cyclic voltammetry and galvanostatic charge–discharge tests. The coal-based porous carbon electrode prepared at an activation temperature of 800 °C (KOH-800) exhibits a specific capacitance of 142.2 F g− 1 at a current density of 1 A g− 1, and retaining 80% of its capacitance (114.0 F g− 1) even at 10 A g− 1. The fabricated liquid supercapacitor displays a power density of 999.8 W kg− 1 and an energy density of 19.4 Wh kg− 1 at a current density of 1 A g− 1. Undergoing 10,000 cycles at 2 A g− 1, the supercapacitor maintains nearperfect capacitance retention and coulombic efficiency close to 100%, demonstrating its excellent durability and stability for supercapacitor applications.

The high-rate performance of lithium/fluorinated carbon (Li/CFx) battery remains a challenge due to poor discharge dynamics behavior accompanied by the overheating issue. We developed a novel fluorinated reed-carbon with three-dimensional (3D) porous channels to favor discharge dynamics behavior achieving excellent discharge performance as high as 5 C. Typically, the preparation of fluorinated reed-carbon mainly involves three steps, namely, crushing into powders, pre-carbonization of reed and precise fluorination. During the fluorination process, we precisely controlled the fluorination temperature in range of 330–370 °C and gas ratio ( F2 of ~ 15 vol%) to optimize the fluorine carbon ratio. This kind of CFx possesses the novel structure at the scale of micron level ranging from 0.5 to 3 μm, which favors the electrolyte and charge transport through the channels smoothly. This 3D porous structure increases the specific surface area of the CFx material, providing more chemical reaction sites to enhance discharge dynamics behavior and effectively hinder the volume expansion of batteries, which is conductive to improve the high-rate performance of Li/CFx battery. This low-cost and facile approach opens up a novel pathway to design carbon materials and CFx for Li/CFx battery.

Considering the intrinsic activity of non-precious metal oxygen reduction reaction (ORR) catalysts is typically lower than that of precious metal catalysts, it is crucial to focus on the rational design of their micro-morphology and active site. This paper employed a simple molten salt-mediated template method to fabricate a Fe3C composite N-doped C catalyst with a layered porous framework ( Fe3C@NC). Tannic acid was utilized to form a strong coordination with iron to limit the grain size of Fe3C nanocrystals generated by high-temperature pyrolysis. Moreover, urea achieved nitrogen doping in tannic acidderived porous carbon, while the graphite phase nitrogen-doped carbon (g-C3N4) formed by its pyrolysis, together with the molten salt-mediated environment, jointly controlled the two-dimensional sheet-like structure of the material. The optimized Fe3C@ NC-800 demonstrated efficient ORR performance, with an ORR half-wave potential of 0.883 V. Its application as a cathode catalyst in a liquid zinc-air battery (ZABs) exhibits a maximum power density of 211.5 mW cm− 2, surpassing that of a Pt/C-based ZAB and indicating the potential practical utility of this material.

Porous carbon has been intensively used for microwave absorption in merits of its outstanding specific surface area and dielectric properties. This study investigates the microwave absorption capacity of saturated wood-based activated carbon (SWAC) which was used for methylene blue treatment. The results demonstrate that SWAC, subjected to high temperature calcination, exhibits excellent microwave absorption properties. The structure, composition, micro-morphology, and electromagnetic parameters of SWAC were comprehensively analyzed using various techniques. The findings reveal that after calcination, SWAC possesses a rich pore structure, optimized material impedance matching, and the introduction of N atoms from the organic substance methylene blue into the carbon lattice of SWAC, thereby providing dipole polarization loss. These properties significantly contribute to its microwave absorption performance. The optimal reflection loss of SWAC at 6 GHz reaches −50.29 dB with an effective absorption bandwidth of 2.01 GHz, achieved at a calcination temperature of 700 °C and a paraffin matrix additive amount of 25%. The one-step treatment of SWAC proves to be a competitive and cost-effective method for producing microwave absorbers, which holds significant importance for the recovery of SWAC.

Biomass-derived carbon materials have attracted considerable attention in electromagnetic wave (EMW) absorption applications due to their advantages of low cost, light weight, and sustainability. Herein, bagasse-based porous carbon (BPC) was prepared by canonization and activation process from natural waste bagasse. The porous flower-like MoS2/ BPC composites were successfully prepared for efficient microwave absorption via hydrothermal process by in-situ formation of flower-like MoS2 into the porous structure of BPC. The effect of hydrothermal time and hydrothermal temperature on surface morphology, degree of graphitization, surface chemical composition and impedance matching of the prepared samples was investigated. Results demonstrated that when the hydrothermal temperature was 220 °C, and the hydrothermal time was 24 h, the obtained MoS2/ BPC sample (named as MoS2/ BPC-220 ℃) showed the minimum reflection loss value (RL) of − 41.6 dB at 8.96 GHz and exhibited effective microwave absorption bandwidth (EAB) of 4.32 GHz at a relatively thin thickness of 1.5 mm. This work provides a promising way to prepare novel biomass-derived porous carbon for strong broadband electromagnetic absorption.

For metal-free carbocatalysts, heteroatom doping and hierarchically porous structure are the significant factors to improve their catalytic performances. Herein, N-, P-co-doped hierarchically porous carbon fiber (NPC–2–800) was prepared by pyrolyzing bamboo pulp in combination with ( NH4)2HPO4 and activator K2CO3. It was found that ( NH4)2HPO4 not only provides N and P atoms, but also significantly affect the morphology and pore structure of the porous carbon. An appropriate dosage of ( NH4)2HPO4 facilitates the formation of hierarchically porous carbon fiber in NPC-2–800. Whereas, the carbon fragments with only micropores were obtained in absence of ( NH4)2HPO4. The hierarchical porosity and the co-doping of N and P atoms in the NPC-2–800 contribute to its outstanding catalytic performances in the 4-Nitrophenol (4-NP) reduction assisted by NaBH4. The NPC-2–800 exhibits an attractive turnover frequency (TOF) value of 4.29 × 10– 4 mmol mg− 1 min− 1, a low activation energy (Ea) of 24.76 kJ/mol, and an acceptable recyclability for 7 cycles without obvious decrease in activity. Kinetics analyses suggest that the 4-NP reduction proceeds through the Langmuir–Hinshelwood model. In addition, the NPC-2–800 can also efficiently catalyze the 2-NP and 3-NP reduction. Moreover, in the real water body, the NPC-2–800 also showed superior catalytic activity to catalyze 4-NP reduction. This study provides an efficient catalyst for pollutant conversion and elimination as well as guidelines for designing versatile carbon-based catalysts.

Volatile organic compounds (VOCs) are commonly produced in the combustion of fossil fuels and in chemical industries such as detergents and paints. VOCs in atmosphere cause different degrees of harm to human bodies and environments. Adsorption has become one of the most concerned methods to remove VOCs in atmosphere due to its high efficiency, simple operation and low energy consumption. Biomass-based porous carbon (BPC) has been considered as the most promising adsorption material because of the low cost and high absorption rate. In this paper, the key characteristic (e.g., specific surface area, pore structure, surface functional groups and basic composition) of BPC affecting the adsorption of VOCs in atmosphere were analyzed. The improvement of adsorption capacity of BPC by common modification methods, such as surface oxidation, surface reduction, surface loading and other modification methods, were discussed. Examples of BPC adsorption on different types of VOCs including aldehydes, ketones, aromatic VOCs, and halogenated hydrocarbons, were also reviewed. The specific adsorption mechanism was discussed. Finally, some unsolved problems and future research directions about BPC for adsorbing VOCs were propounded. This review can serve as a valuable reference for future developing effective biomass-based porous carbon VOCs adsorption technology.

We successfully synthesized a porous carbon material with abundant hexagonal boron nitride (h-BN) dispersed on a carbon matrix (p-BN-C) as efficient electrocatalysts for two-electron oxygen reduction reaction ( 2e− ORR) to produce hydrogen peroxide ( H2O2). This catalyst was fabricated via ball-milling-assisted h-BN exfoliation and subsequent growth of carbon structure. In alkaline solutions, the h-BN/carbon heterostructure exhibited superior electrocatalytic activity for H2O2 generation measured by a rotating ring-disk electrode (RRDE), with a remarkable selectivity of up to 90–97% in the potential range of 0.3–0.6 V vs reversible hydrogen electrode (RHE), superior to most of the reported carbon-based electrocatalysts. Density functional theory (DFT) simulations indicated that the B atoms at the h-BN heterostructure interface were crucial active sites. These results underscore the remarkable catalytic activity of heterostructure and provide a novel approach for tailoring carbon-based catalysts, enhancing the selectivity and activity in the production of H2O2 through heterostructure engineering.

Carbon nanomaterials (CNMs) have been the subject of extensive research for their potential applications in various fields, including photovoltaics and medicine. In recent years, researchers have focused their attention on CNMs as their high electrical conductivity, low cost, and large surface area are promising in replacing traditional platinum-based counter electrodes in dye-sensitized solar cells (DSSC). In addition to their electrical properties, CNMs have also displayed antibacterial activity, making them an attractive option for medical applications. The combination of CNMs with metal oxides to form composite materials represents a promising approach with significant potential in various fields, including energy and biology. Here, we introduce porous carbon nanospheres (PCNS) derived from Cocos nucifera L. and its ZnO composite (PCNS/ZnO) as an alternative material, which opens up new research insights for platinum-free counter electrodes. Bifacial DSSCs produced using PCNS-based counter electrodes achieved power conversion efficiencies (PCE) of 3.98% and 2.02% for front and rear illumination, respectively. However, with PCNS/ZnO composite-based counter electrodes, the efficiency of the device increased significantly, producing approximately 5.18% and 4.26% for front and rear illumination, respectively. Moreover, these CNMs have shown potential as antibacterial agents. Compared to PCNS, PCNS/ZnO composites exhibited slightly superior antibacterial activity against tested bacterial strains, including gram-positive Bacillus cereus (B. cereus) and Staphylococcus aureus (S. aureus), and gram-negative Vibrio harveyi (V. harveyi) and Escherichia coli (E. coli) with MIC values of 125, 250, 125, and 62.5 μg/ml, respectively. It is plausible that the outcomes observed were influenced by the synergistic effects of the composite material.

The raw material selected for this research was Brazil chestnut shells (BCs), which were utilized to gain porous carbon as a positive electrode for lithium–sulfur batteries (LSBs). The effects of N/S co-doped on the electrochemical properties of porous carbon materials were studied using thiourea as nitrogen and sulfur sources. The experimental results indicate that the N/S co-doped carbon materials have a higher mesopore ratio than the undoped porous carbon materials. The porous carbon material NSPC-2 has a lotus-like structure with uniform pore distribution. The N and S doping contents are 2.5% and 5.4%. The prepared N/S co-doped porous carbon materials were combined with S, respectively, and three kinds of sulfur carbon composites were obtained. Among them, the composite NSPC-2/S can achieve the initial specific discharge capacity of 1018.6 mAh g− 1 at 0.2 C rate. At 1 C rate, the initial discharge capacity of the material is 730.6 mAh g− 1, and the coulomb efficiency is 98.6% and the capacity retention rate is 71.5% after 400 charge–discharge cycles.

We have intended and preparation of hierarchically absorbent materials were covered with a NiMn2O4 and acts as a catalyst for azo dye degradation. The polyaromatic-based (PA) absorbent compounds were initially constructed by bromomethylated aromatic hydrocarbons which undergo self-polymerization in presence of ZnBr as a reagent and cross linker is bromomethyl methyl ether. The absorbent black materials with a 3D network were prepared by direct carbonization and activation of the as-prepared PA. The hydrothermal method was adapted for the preparation of carbon hybrid material C@NiMn2O4 powder's catalytic activity is effective in reducing p-nitrophenol to p-aminophenol and decolorizing carbon-based dyes like methyl orange (MO), methyl yellow (MY), and Congo red (CR) in aqueous media at 25 °C when NaBH4 is added. UV–visible spectroscopy was used to analyze the dyes' breakdown at regular interval.