해상풍력발전의 건설이 여러 가지 환경 및 가설공법 등의 설치환경 등의 원인에 의하여 건설지점이 천해에서 심해로 이동하는 경향을 나타내고 있다. 이러한 경향 속에 해상풍력발전 지지구조물의 심해화에 따른 지지구조물에 대한 연구는 중요성이 더욱 증대될 것으로 판단된다. 본 연구에서는 기존의 Jacket 구조물에 대하여 Precast Concrete Block 및 Suction pile을 적용한 Jacket 구조물을 제안하고 이에 대하여 구조해석 및 안전성 평가를 실시하였다. 또한 제안된 구조물에 동조액체감쇠기를 적용하여 구조물 진동성능 향상을 도모하고자 하였다. 연구결과, 제안된 신형식 Jacket 구조물은 충분한 안전성을 가지고 있는 것으로 평가되었으며, 동조액체감쇠기를 적용하였을 경우, 약 5%의 진동저감 효과가 있는 것으로 검토되었다.

지지력이 큰 하부지반에 구조물의 하중을 전달하기 위한 방안으로 말뚝기초가 대부분 적용되고 있다. 이 연구에서는 접합부에 보강되는 철근량에 따라 반복하중 하에서 프리캐스트공법과 철근 및 속채움 콘크리트로 말뚝머리부를 보강한 철근콘크리트 말뚝(HPC)과 기초접합부 거동을 실험을 통해 평가하였다. 철근량에 변화에 따라 제작된 두 종류의 접합부 실험체의 균열패턴과 파괴거동은 유사한 수준으로 평가되었다. 철근량 1.77배 증가에 기인하여 BS-H25 실험체는 BS-H19 실험체에 비해 최고하중은 약 1.47배 증가하였지만 연성비는 정가력시 76%, 부가력시 70% 수준을 나타내었다. 강성감소는 접합부 철근 항복 이후 BS-H19 실험체와 BS-H25 실험체는 정가력시 초기강성의 약 66% ~ 71% 수준으로 부가력시 54% ~ 57% 수준으로 감소되었고 BS-H25 실험체가 평균 13% 높은 강성값을 나타내었다. 극한하중 상태에서의 BS-H19와 BS-H25 실험체의 누적 에너지 소산량은 사용하중 상태에 비해 약 5.5배 및 6.6배 큰 값으로 측정되었다.

In this current study evaluated the horizontal shear strength of reinforced concrete pile between pile body and infilled concrete interface. From the calculated results of horizontal shear strength it was found that the interface between pile body and infilled concrete was evaluated to be able to safely resist factored shear stress.

Due to the economic growth and development of construction technology, a role of foundation to resist heavy loads has been increased. In this present study to improve the structural performance of reinforced concrete pile, the precast HPC pile reinforced with rebar and filling concrete was developed and the strength of pile was predicted based on the limit state design method. The safety of HPC pile strength was evaluated by comparing with the design values. The geometry of HPC pile is a decagon cross section with a maximum width of 500 mm and a minimum width of 475 mm, and the hollow head of pile thickness is 70 mm. The inner area of the hollow head part was made as the square ribbed shape presented in the limit state design code in order to achieve horizontal shear strength between pile concrete and filling concrete. From the shear test results, it was found that the stable shear strength were secured without abrupt failure until maximum load stage despite the shear cracks was found. Shear strength is 135% and 119% higher than that of design value calculated from limit state design code. The driving test results of HPC pile according to the presence of additional reinforcement showed the outstanding crack resistance against impact loads condition. From the bending test results the flexural load between PHC pile and HPC pile was 1.51 times and 1.48 times higher than that of the design flexural load of conventional PHC pile.

This study investigated the shear behavior of hollowed-head precast reinforced concrete(HPC) pile. In order to evaluate shear strength of the pile, two specimens were manufactured and shear strength test was performed based on KS F 4306 Standard. From the test result it was found that the flexural and inclined cracks were appeared and crack widths were controlled within the shear span up to maximum loads as well as did not appear the abrupt fracture. The average maximum shear load was measured 823.6 kN.