This study selected two labor-intensive processes in harsh environments among domestic food production processes. It analyzed their improvement effectiveness using 3-dimensional (3D) simulation. The selected processes were the “frozen storage source transfer and dismantling process” (Case 1) and the “heavily loaded box transfer process” (Case 2). The layout, process sequence, man-hours, and output of each process were measured during a visit to a real food manufacturing factory. Based on the data measured, the 3D simulation model was visually analyzed to evaluate the operational processes. The number of workers, work rate, and throughput were also used as comparison and verification indicators before and after the improvement. The throughput of Case 1 and Case 2 increased by 44.8% and 69.7%, respectively, compared to the previous one, while the utilization rate showed high values despite the decrease, confirming that the actual selected process alone is a high-fatigue and high-risk process for workers. As a result of this study, it was determined that 3D simulation can provide a visual comparison to assess whether the actual process improvement has been accurately designed and implemented. Additionally, it was confirmed that preliminary verification of the process improvement is achievable.

Recently, in the case of the root industry, although it is a basic industry that forms the basis of manufacturing competitiveness, there continues to be a shortage of manpower due to reasons such as dangerous working environments, industrial economic difficulties, and low wage systems. In addition, the demand for automation of production lines using robots is increasing due to a shrinking labor market due to a decrease in the working population due to aging, higher wages, shorter working hours, and limitations of foreign workers. In this study, a system was developed to automate the injection molding process for producing ball valves for automobiles by applying robot system. The applied process flow consists of alignment and insertion of insert parts, and removal, transfer, and loading of the product after injection molding, which is currently performed manually. Through the application of the developed robot automation system, the cycle time was improved by more than 30% and the defect rate was reduced by more than 70%.

Thin-film shape technology is recognized for its core technology to enhance the technology of LCD, PDP, semiconductor manufacturing processes, hard disks and optical disks, and is widely used to form coated thin films of products. In addition, resistance (electron beam filament) technology for heating is used to manufacture filament for ion implants used in semiconductor manufacturing processes. By establishing an electronic beam filament production system and developing seven specifications of electronic beam filament, it is contributing to improving trade dynamics and increasing exports to Japan through localized media of theoretical imports to domestic companies. In this study, CAE analysis was performed after setting electron beam filament specification and development objectives, facilities and fabrication for electron beam filament production, electron beam filament JIG & fixture design and fabrication followed by electron beam filament prototype. Then, the automation and complete inspection equipment of the previously developed electronic beam filament manufacturing facilities was developed and researched to mass-produce them, to analyze and modify prototypes, design and manufacture automation facilities, and finally, to design and manufacture the complete inspection equipment. In this paper, design and manufacture of electronic beam filament automation facilities for mass production were dealted with.

In this study, to reduce the weight of cross member assembly for small truck. In order to optimize the design of the cross member structure by changing the equation into the rivet coupling method, The size and the hole spacing of the large sheet plate, the rivet hole size of the large sheet plate, In the structural analysis, we looked at what was going to happen, and the tensile, shear The load test was carried out to investigate the damage caused by the maximum load acting on the rivet. Riveting work, but to improve productivity, we developed automated riveting device using robot To reduce the number of workers, reduce jig transfer and installation time, and reduce load factor. To produce the maximum output of the product.