Vitrification, one of the most promising solidification processes for various materials, has been applied to radioactive waste to improve its disposal stability and reduce its volume. Because the thermal decomposition of dry active waste (DAW) significantly reduces its volume, the volume reduction factor of DAW vitrification is high. The KHNP developed the optimal glass composition for the vitrification of DAW. Since vitrification offers a high-volume reduction ratio, it is expected that disposal costs could be greatly reduced by the use of such technology. The DG-2 glass composition was developed to vitrify DAW. During the maintenance of nuclear power plants, metals containing paper, clothes, and wood are generated. ZrO2 and HfO2 are generally considered to be network-formers in borosilicate-based glasses. In this study, a feasibility study of vitrification for DAW that contains metal particulates is conducted to understand the applicability of this process under various conditions. The physicochemical properties are characterized to assess the applicability of candidate glass compositions.

In the Kori power plant radioactive waste storage, the concentrated waste and spent resin drums generated in the past are repacked and stored in large concrete drums. Four 200 L drums of solidified concentrated waste are packed in the square concrete. One 200 L drum of spent resin is packed inside the round concrete. In order to build a foundation for disposal of large concrete drums that generated in the past, it is necessary to develop a large concrete drum handling device and disposal suitability evaluation technology. In order to build handling equipment and establishment of disposal base, such as weight and volume, of square and round concrete containers must be identified. In addition, waste information, such as the production record of the built in drum and the type of contents, is required. Therefore, this study plans to comprehensively review the characteristics of the waste by investigating the structure of square and round concrete containers and the records of internal drum production.

Currently, the most promising fuel candidate for use in sodium fast reactors (SFRs) is metallic fuel, which is produced by a modified casting method in which the metallic fuel material is sequentially melted in an inert atmosphere to prevent volatilization, followed by melting in a graphite crucible, and then injection casting in a quartz (SiO2) mold to produce metallic fuel slugs. In previous studies, U-Zr metallic fuel slugs have been cast using Y2O3 reaction prevent coatings. However, U-Zr alloy-based metallic fuel slugs containing highly reactive rare earth (RE) elements are highly reactive with Y2O3-coated quartz (SiO2) molds and form a significant thickness of surface reaction layer on the surface of the metallic fuel slug. Cast parts that have reacted with nuclear fuel materials become radioactive waste. To decrease amount of radioactive waste, advanced reaction prevent material was developed. Each RE (Nd, Ce, Ln, Pr) element was placed on the reaction prevent material and thermal cycling experiments were carried out. In casting experiments with U-10wt% Zr, it was reported that Y2O3 layer has a high reaction prevent performance. Therefore, the reaction layer properties for RE elements with higher reactivity than uranium elements were evaluated. To investigate the reaction layer between RE and NdYO3, the reaction composition and phase properties as a function of RE content and location were investigated using SEM, EDS, and XRD. The results showed that NdYO3 ceramics had better antireaction performance than Y2O3.

Kori unit 1, the first PWR (Pressurized Water Reactor) in Korea, was permanent shut down in 2017. In Korea, according to the Nuclear Safety Act, the FDP (Final Decommissioning Plan) must be submitted within 5 years of permanent shutdown. According to NSSC Notice, the types, volumes, and radioactivity of solid radioactive wastes should be included in FDP chapter 9, Radioactive Waste Management, Therefore, in this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. Solid radioactive waste depending on the characteristics of the generation was classified into reactor vessel and reactor vessel internal, large components, small metals, spent nuclear fuel storage racks, insulation, wires, concrete debris, scattering concrete, asbestos, mixed waste, soil, spent resins and filters, and dry active waste. Radiological characterization of solid radioactive waste is performed to determine the characteristics of radioactive contamination, including the type and concentration of radionuclides. It is necessary to ensure the representativeness of the sample for the structures, systems and components to be evaluated and to apply appropriate evaluation methods and procedures according to the structure, material and type of contamination. Therefore, the radiological characterization is divided into concrete and structures, systems and components, and reactor vessel, reactor vessel internal and bioshield concrete. In this study, the types depending on generation characteristics and radiological characterization methods and process of solid radioactive waste were analyzed. The results of this study can be used as a basis for the preparation of the FDP for the Kori unit 1.

As the importance of radioactive waste management has emerged, quality assurance management of radioactive waste has been legally mandated and the Korea Radioactive Waste Agency (KORAD) established the “Waste Acceptance Criteria for the 1st Phase Disposal Facility of the Wolsong Lowand Intermediate-Level Waste Disposal Center (WAC)”, the detailed guideline for radioactive waste acceptance. Accordingly, the Korea Atomic Energy Research Institute (KAERI) introduced a radioactive waste quality assurance management system and developed detailed procedures for performing the waste packaging and characterization methods suggested in the WAC. In this study, we reviewed the radioactive waste characterization method established by the KAERI to meet the WAC presented by the KORAD. In the WAC, the characterization items for the disposal of radioactive waste were divided into six major categories (general requirements, solidification and immobilization requirements, radiological, physical, chemical, and biological requirements), and each subcategories are shown in detail under the major classification. In order to satisfy the characterization criteria for each detailed item, KAERI divided the procedure into a characterization item performed during the packaging process of radioactive waste, a separate test item, and a characterization item performed after the packaging was completed. Based on the KAERI’s radioactive waste packaging procedure, the procedure for characterization of the above items is summarized as follows. First, during the radioactive waste packaging process, the characterization corresponding to the general requirements (waste type) is performed, such as checking the classification status of the contents and checking whether there are substances unsuitable for disposal, etc. Also, characterization corresponding to the physical requirements is performed by checking the void fraction in waste package and visual confirmation of particulate matter, substances containg free water, ect. In addition, chemical and biological requirements can be characterized by visually confirming that no hazardous chemicals (explosive, flammable, gaseous substances, perishables, infectious substances, etc.) are included during the packaging process, and by taking pictures at each packaging steps. Items for characterization using separate test samples include radiological, physical, and chemical requirements. The detailed items include identification of radionuclide and radioactivity concentration, particulate matter identification test, free water and chelate content measurement tests, etc. Characterization items performing after the packaging is completed include general requirements such as measuring the weight and height of packages and radiological requirements such as measurements of surface dose rate and contamination, etc. All of the above procedures are proceduralized and managed in the radioactive waste quality assurance procedure, and a report including the characterization results is prepared and submitted when requesting acceptance of radioactive waste. The characterization of KAERI’s radioactive waste has been systematically established and progressed under the quality assurance system. In the future, we plan to supplement various items that require further improvement, and through this, we can expect to improve the reliability of radioactive waste management and activate the final disposal of KAERI’s radioactive waste.

The decommissioning of Korea Research Reactor Units 1 and 2 (KRR-1&2), the first research reactors in South Korea, began in 1997. Approximately 5,000 tons of waste will be generated when the contaminated buildings are demolished. Various types of radioactive waste are generated in large quantities during the operation and decommissioning of nuclear facilities, and in order to dispose of them in a disposal facility, it is necessary to physico-chemically characterize the radioactive waste. The need to transparently and clearly conduct and manage radioactive waste characterization methods and results in accordance with relevant laws, regulations, acceptance standards is emerging. For radioactive waste characterization information, all information must be provided to the disposal facility by measuring and testing the physical, chemical, and radiological characteristics and inputting related documents. At this time, field workers have the inconvenience of performing computerized work after manually inputting radioactive waste characterization information, and there is always a possibility that human errors may occur during manual input. Furthermore, when disposing of radioactive waste, the production of the documents necessary for disposal is also done manually, resulting in the aforementioned human error and very low production efficiency of numerous documents. In addition, as quality control is applied to the entire process from generation to treatment and disposal of radioactive waste, it is necessary to physically protect data and investigate data quality in order to manage the history information of radioactive waste produced in computerized work. In this study, we develop a system that can directly compute the radioactive waste characterization information at the field site where the test and measurement are performed, protect the stored radioactive waste characterization data, and provide a system that can secure reliability.

The radionuclide inventory in radioactive waste from nuclear power plants should be determined to secure the safety of final repositories. As an alternative to time-consuming, labor-intensive, and destructive radiochemical analysis, the indirect scaling factor (SF) method has been used to determine the concentrations of difficult-to-measure radionuclides. Despite its long history, the original SF methodology remains almost unchanged and now needs to be improved for advanced SF implementation. Intense public attention and interest have been strongly directed to the reliability of the procedures and data regarding repository safety since the first operation of the low- and intermediate-level radioactive waste disposal facility in Gyeongju, Korea. In this review, statistical methodologies for SF implementation are described and evaluated to achieve reasonable and advanced decision-making. The first part of this review begins with an overview of the current status of the scaling factor method and global experiences, including some specific statistical issues associated with SF implementation. In addition, this review aims to extend the applicability of SF to the characterization of large quantities of waste from the decommissioning of nuclear facilities.

우리는 실험과 MCNP 시뮬레이션을 통해 전알파 분석법의 한계를 설명하였다. 국내에서 중·저준위 방사성폐기물 인도 규 정 관련, 전알파 분석법은 방사성폐기물을 처분하기 위해 반드시 규명해야 할 방사성 특성평가 인자이다. 전알파 분석법은 시료 준비 절차가 간단하고 신속한 분석 결과를 제공하지만, 정량분석 인자로 사용하는 것은 적절하지 않다. KCl과 241Am 을 이용하여 시편 건조고형물 무게에 따른 전알파 계측효율을 평가하였다. 동일한 무게의 시편일지라도 계측효율의 차이가 20% 나는 것을 확인하였고, 이는 시편의 물리적 형태가 서로 다르기 때문인 것으로 보인다. 토양 중 우라늄을 화학분리 한 후, ICP-MS로 우라늄을 직접 측정한 결과와 전알파 농도를 비교하였다. 전알파는 실제 우라늄 농도에 비해 50% 과소평가되 었다. 알파핵종별 전알파 계측효율이 최대 3배 차이 나기 때문에, 전알파 분석결과는 개별 알파핵종의 합과 비교하기 보다는 스크리닝 개념으로 사용하는 것이 적절하다.

방사성폐기물 지층 처분을 위한 부지 선정 과정에서 심층 처분장의 안전성을 평가하는데 필요한 입력 자료를 제공하기 위해 부지특성조사를 수행한다. 본 논문에서는 부지특성조사를 선도하여 수행하였던 해외 사례를 분석하고, 국내에서 방사성폐 기물 처분을 위해 수행해야 할 부지특성조사 방법을 제안하고자 하였다. IAEA가 고려하는 부지특성조사 방법은 단계별 부 지특성조사로 본 논문에서 소개된 해외의 경우도 이 방법을 따르고 있는데, 부지특성조사는 시기별, 조사 항목별로 다수의 지역에서 개략적인 부지의 정보를 도출하는 예비 부지특성조사와 조사 결과 선정된 지역에서 보다 자세한 부지특성자료를 생산하기 위한 상세 부지특성조사로 구분할 수 있다. 특히, 상세 부지특성조사 단계에서는 조사지역에 장심도 시추공을 굴 착하여 심부 영역에 대한 지질 특성을 바탕으로, 수리지질, 수리-지화학, 암석역학, 열, 용질이동에 대한 특성을 도출해야 한 다. 단계별 부지특성조사를 통해 도출된 부지 고유의 지질환경 특성은 부지특성모델로 구축되어야 하는데, 이를 종합하여 해석해야 비로소 조사지역의 부지특성을 이해하고, 지층 처분에 보다 유리한 부지를 최종 후보지역으로 선정할 수 있는 것 이다. 해외 사례를 살펴본 결과, 부지특성조사 단계에 소요되는 시간은 대략 7~8년이 소요될 것으로 예상되나, 이를 계획하 고 수행하는 시스템이 뒷받침 되지 않을 경우 보다 지연될 수 있을 것이다.