This study is based on a representative body shape drawn from previous studies that classify adult male torso shapes. In this study, a design method is proposed by developing a tight-fit pattern that can be easily developed into various items and designs using the body surface development figure. This is obtained by converting the 3D body shape of the model representing the representative body shape. The specific design method was conducted as follows. Actual measurement values were used for waist back length, waist-to-hip length, shoulder length. The scye depth was determined as C/4–1.7 cm, and the front and back Interscye was set at (1/2 × actual measurements)–0.2 cm. The front-back neck breadth was set to (1/5 × base neck circumference)–1.3 cm and (1/5 × base neck circumference) cm. The front-back neck depth was set to (1/5 × base neck circumference)–1.2 cm and 3.5 cm. Front chest circumference was C/4–1 (front-back difference)cm; (1/4 × back chest circumference) was C/4 + 1 (front-back difference) + 0.3 (dart amount) cm. Front waist circumference was W/4–0.2 (front-back difference) + 2.2 (dart amount) cm; back waist circumference was W/4 + 0.2 (front-back difference) + 2.5 (dartamount) cm; front hip circumference was H/4 + 0.2 (ease) + 0.2 (front-back difference) cm; and back hip circumference was H/4 + 0.2 (ease)–0.2 (front-back difference) cm; Front droop was 1.6 cm. The newly developed tight-fit pattern is expected to be of great use as a basis for garment construction.

This study is performed to fabricate a Ti porous body by freeze drying process using titanium hydride (TiH2) powder and camphene. Then, the Ti porous body is employed to synthesize carbon nanotubes (CNTs) using thermal catalytic chemical vapor deposition (CCVD) with Fe catalyst and methane (CH4) gas to increase the specific surface area. The synthesized Ti porous body has 100 μm-sized macropores and 10-30 μm-sized micropores. The synthesized CNTs have random directions and are entangled with adjacent CNTs. The CNTs have a bamboo-like structure, and their average diameter is about 50 nm. The Fe nano-particles observed at the tip of the CNTs indicate that the tip growth model is applicable. The specific surface area of the CNT-coated Ti porous body is about 20 times larger than that of the raw Ti porous body. These CNT-coated Ti porous bodies are expected to be used as filters or catalyst supports.

The purpose of this study was to develop a shirt pattern that enhances the functionality of golf swing motions. The pattern was made with 3D body surface shape data that changed according to dynamic golf postures. The data were collected from the golf swing motions. The 3D body surface data in golf swing postures piled up on the 3D surface data in a static posture. The results showed that the surface shape data changed more in the address, back swing, and finish postures than the other swing postures. The experimental pattern was developed with 3D surface scan data in those three golf swing motions. The pattern had raglan sleeves and the front-bodied piece was divided into two pieces with a princess line, which comes from armscye line of the address posture. The back bodice piece was divided into three pieces with a yoke line and a back princess line. The yoke line was made by back shoulder shape in the back swing posture. The level of comfort of the experimental garment and commercial golf shirts was evaluated by 38 women golfers. The experimental garment pattern was evaluated to be more comfortable in golf swing postures than commercial golf shirts.

Determining age distributions of insect is required for many basic ecological studies. Most of insect developmental studies, the head capsule width and other developmental traits have been widely used to distinguish the instars. Unlike to other insect species, collembolan continues to molt after they reach sexual maturity. So these traits sometimes make it difficult to conduct developmental studies. Model animal used in this study was Paranura rosea a native collembolan speciese. To determine the age groups of P. rosea, we periodically (1week) made digital images of P. rosea (over 100 different images) under the magnifier (DIMIS-M) for consecutive 20 week. And then the head capsule width and the surface area of P. rosea were analyzed using a image software (ImageJ). In this test the head capsule widths and surface area were set as developmental parameters. Both two developmental parameters showed time-dependent increase patterns. And they gave good agreements between predicted developmental parameters and observed parameters (r2=0.83 and 0.71). Based on the reproducibility of juveniles and statistical mean separation tests (tukey's test), both two developmental parameters could be divided into 3 age groups. The information given this study will be used as a basis for understanding the population dynamics and other ecological research.

본 연구는 자동노출제어 (AEC; Automatic Exposure Control)를 이용한 복부 일반 X선 검사에서 체질량지수 (BMI; Body Mass Index)가 입사표면공기커마 (ESAK; Entrance Surface Air Kerma)에 미치는 영향에 대해 알아보았다. 연구방법은 AEC를 이용하여 복부 일반 X선 검사를 시행 받은 321명을 대상으로 키, 몸무게, BMI와 ESAK의 관계 및 BMI범주 (Underweight, Normal, Overweight, Obese 1, Obese 2)에 따른 평균 ESAK값을 비교하였다. 연구의 결과 몸무게 (R2=0.777, p<.001)와 BMI (R2=0.835, p<.001)는 ESAK와 양의 상관관계가 있었던 반면, 키 (R2=0.075, p<.001)와 BMI는 뚜렷한 상관관계를 확인할 수 없었다. BMI범주에 대한 평균 ESAK는 통계적으로 유의한 차이를 보였으며, 사후분석을 통해 유의수준 0.05에 대해 5개의 부집단이 존재하여 모든 BMI범주 간 ESAK값의 차이가 있는 것을 알 수 있었다. 또한, 인접한 BMI간 ESAK값 증가폭이 Underweight에서 Obese 2로 갈수록 점차 늘어나 BMI가 증가할수록 피폭선량이 급격하게 증가되는 것을 알 수 있었다. 따라서 복부 일반 X선 검사에서 AEC를 사용할 경우 BMI가 증가함에 따라 과도한 선량이 조사될 수 있음을 인식하고 검사조건을 고정하여 촬영하는 등의 노력을 통한 선량저감화가 필요할 것으로 판단된다.