Different laboratory strains of Drosophila melanogaster are reported to differ considerably in their physiology, behavior, and life-histories, due to their adaptations to different laboratory conditions. Recent advances in insect aging research have highlighted the importance of protein:carbohydrate (P:C) balance as a key dietary determinant of lifespan and other components of fitness, but it remains unexplored whether P:C balance affects the fitness-related traits of D. melanogaster in a strain-specific manner. The purpose of this study was to compare the life-history consequences of six different laboratory strains of D. melanogaster (three Canton-S substrains, w1118, yw, and Oregon-R) allocated to four synthetic diets differing in P:C ratio (1:16, 1:4, 1:1, or 4:1). Five components of fitness (lifespan, fecundity, larval viability, development time, and body mass) were recorded from flies maintained at 25oC under L:D 12:12 photoperiod. All strains exhibited qualitatively similar responses to dietary P:C balance, with the increase in P:C ratio being associated with shortened lifespan and improved egg production. In all strains, fly larvae confined to P:C 1:16 suffered high mortality, retarded growth, and reduced body size. As indicated by significant diet×strain interactions for all measured fitness components, the magnitude of such diet effect varied among different laboratory strains in D. melanogaster. Possible explanations for such strain differences are discussed.

For the studying of effects of matrine and azadirachtine against Aphidius colemani, it was conducted to test the toxic effect of ecofriendly materials. Matrine and azadirachtine are active ingredient of the most commonly used eco-friendly insecticidal materials against insect pests. The effects of materials are investigated by spraying solution to mummies and adults in laborartory condition (Temp: 25℃; 16L:8D; RH: 50-60%). Each materials was diluted and treated with 5 concentrations, 10 wasps for each replications and 3 replications for each concentration. Fitness of A. colemani was assessed by measuring survival rate, emergence rate, longevity and fecundity. Wasps adults were used for experiments within 48 hours after their hatching. Emergence rates were checked for 12 days after spray to mummies of A. colemani, and survival rates were checked at 24 and 48 hours after vial test for adult parasitoids with 10% sugar solution. Adult wasps were exposed to dry residue of material for 24 hours. Longevity was monitored every 12 hours and fecundity was measured by the number of mummies produced by A. colemani adults.

We investigated primary ecological characters, such as life cycle and morphology of the lawn cutworm, Spodoptera depravata (Lepidoptera: Noctuidae), which is one of the most economically damaging pests to grasses. For larval culture the turfgrass, Zoysia japonica, was provided as a feed source at 25℃ and 60±5% humidity. Development period of each stage was as follows: 4.11±0.19 days for eggs, 25.17±3.02 for larvae, 8.80±0.28 for pupae and 7.57±0.95 for adults. Larval stages continued to 7th instar and this result contrasts to pre-existing data, which indicate 6th instar in S. depravata. Developmental period of each instar of S. depravata ranged from the minimum of 2.1 days to the maximum of 4.81 days, with the 7th instar longest. Correlation analysis between body length and head capsule width of each instar showed a significant correlation between the two measures. Pupal colors were changed from the light brown and green right after pupation to dark brown as pupal cuticle hardens. Wing length of adults in both sexes was similar, but forewing of male had obvious outer line and eyespot with dark gray-brown background, whereas that of female had less obvious in these characters, with light gray-brown background. Pre-period of eggs deposition was 2 days, oviposition period was 4.6 days, average fecundity per female was about 419 eggs, and rate of hatching was about 83%.

Grapholita molesta (Busck) (Lepidoptera: Tortricidae) is an important pest of pome and stone fruits, i.e., apple, peach, and plum. We evaluated single or combined application of an entomopathogenic fungi Beauveria bassiana (Balsamo) Vuillemin. ARP14 (1×108 conidia/mL) and a botanical insecticide of azadirachtin (Azatrol, PBI/Gordon Cooperation) (10 mL/L) against first instar larvae (<5 h old) of G. molesta in glass scintillation vial bioassay. Combined use of B. bassiana ARP-14 and azadirachtin showed higher corrected morality of 100% at 8 h than 71.4% in λ-cyhalothrin used as a positive control.

In general, hemipteran insects transmit either obligate or facultative symbionts to their offspring using various transmission mechanisms. Riptortus pedestris (Hemiptera: Alydidae) also have facultative symbiosis with Burkholderia sp. which is acquired from the soil every generation especially during 2nd instar nymphal period. This environmental symbiont transmission makes R. pedestris face a great risk of missing their symbionts, however, previous studies showed that they have intimate associations with their symbionts. Therefore, we suspected that R. pedestris 2nd instar nymphs may have a preference toward Burkholderia sp. to achieve an efficient symbiont acquisition during the limited time of window. In order to identify the preference of 2nd instar nymph, we first conducted dual-choice experiments varying with the number of 2nd instar nymphs (a nymph and 100 nymphs) in plastic cages. Furthermore, Y-tube olfactometer experiments varying with the presence of soil as medium of Burkholderia sp. were performed to determine if the insects respond to bacterial volatile induced from the symbiont. Based on our results, we observed that R. pedestris 2nd instar nymphs may not show any specific behavioral preference or response to chemical volatile from Burkholderia sp. in laboratory conditions (P >0.24). Therefore, we will further conduct a dual-choice experiment in a semi-field condition to investigate if such patterns can be detected in a larger arena simulating a more natural environment.

작은뿌리파리는 넓은 기주 범위를 가지며 시설하우스에서 피해를 주는 주요 해충이다. 이를 해결하기 위한 방제 방법을 연구하기 위해 재현성 있는 사육방법을 개발보급시켜야 할 필요가 있다. 본 연구는 실내에서 작은뿌리파리에 대한 대량사육시스템을 구축하고 생태적 특성을 연구하였다. 작은뿌리파리의 온도별 발육을 조사한 결과, 20℃에서 부화율, 용화율, 우화율이 가장 높았으며, 성충을 제외한 발육기간이 20.8일로 가장 짧았다. 성충수명은 온도가 높아질수록 수명이 짧아졌으며, 20℃에서 평균 144개로 가장 많이 산란하였다. 작은뿌리파리 유충 사육배지 조성이 유충 발육에 미치는 영향을 알아본 결과, 물한천배지와 감자디스크배지가 부화율 84.7, 84.4%로 높았으며, 유충기간은 감자디스크배지가 14.7 일로 가장 짧았다. 용화율, 우화율은 감자디스크배지가 85.2, 82.6%로 가장 높았고 산란수도 125.6개로 가장 높았다. 우화케이지에서 생육배지를 선발한 결과, 우화율은 원예용 상토 50% + 톱밥 25% + 잘게 간 감자 25% 배지가 접종 14일차의 우화율이 88.4%로 가장 높았다. 우화케이지의 생육배지 적정 접종밀도는 유충 1,000개 접종 시 84.7%로 가장 높았고, 유충 3,000, 5,000, 7,000개 접종시 81.4, 58.8, 38.7%로 유충 접종량이 많을수록 우화율이 낮았다. 위 실험 결과에 따라 작은뿌리파리의 대량사육시스템의 사육단계별 자세한 사항을 정리하였다.

The objective of this study is to analyze the behavior and failure mode of the brackets that support middle slabs in the double-deck tunnels by conducting laboratory experiments. In the double-deck tunnels, the middle slabs are supported by the brackets connecting to the tunnel lining. The brackets are subjected to the loads due to the weight of middle slabs and traffic moving on the middle slabs. Since the damages of brackets are directly associated with the safety problems such as falling down of middle slabs, the appropriate design of brackets is one of the most important factors when designing double-deck tunnels. In this study, the reinforcement design of concrete bracket was performed based on the concrete structure design guide, and the load capacity was evaluated by conducting laboratory loading tests. A small scale concrete bracket specimen was fabricated using the scale factor of 0.5. The reaction wall is normally needed to simulate the tunnel lining in this kind of test; however, two brackets were attached symmetrically to a column, which was assumed to be tunnel lining, to be able to conduct the tests without using the reaction wall. When the bracket specimen was fabricated, the lining part was fabricated first and after curing of the lining part, two brackets were fabricated at the same time at both sides of the lining part. In the tests, the loads were applied to both brackets simultaneously using a loading frame and the displacements were measured at different locations. The main behaviors of the bracket systems such as the vertical displacements of brackets and the displacements at the interfaces between the brackets and lining were measured and the horizontal displacements of the specimen were also measured at the bottom of the lining part to confirm if there was any slip or rotation of the specimen during the tests. The experimental analysis results showed that the initial damage of the specimen was observed at the interface between the bracket and lining with appearing the gap and the failure of the specimen was reached with cracking in the brackets. The load capacity (safety factor) of the bracket specimen to the initial damage based on the design load was 2.5 and to the failure was 3.3.

In Vietnam, reclaimed asphalt pavement technology is considered as the key to reduce the cost of pavement construction, and decrease the industrial waste from flexible pavement rehabilitation. Ministry of Transportation has concentrated to develop RAP technology since 2008. As a result, there are three trademark of recycling technologies applied in Vietnam such as Wirtgen (Germany), Hall Brothers (U.S.), and Sakai (Japan). This paper is focused on asphalt pavement investigation of field and laboratory tests from Cold In-place recycling technology. The laboratory tests carried out on the material were conventional tests including Marshall stability, indirect tensile strength... Field data was collected using a Benkelman beam and core specimens for indirect tensile strength test.

It has been recognized that the performance of pavements is closely related to the properties of the underlying unbound layers and subgrade. It has also been recognized that unbound pavement materials possess a complex nature and often exhibit nonlinear behaviors [1, 2]. The Mechanistic-Empirical Pavement Design Guide (MEPDG) is founded on the use of resilient modulus as the primary input parameter when characterizing unbound pavement materials [3, 4]. The resilient moduli of unbound materials are typically determined by performing repeated load triaxial (RLT) tests in the laboratory. Due to that laboratory resilient modulus tests require sophisticated equipment and trained operators following complicated test procedures, many transportation agencies may not have access to the laboratory facility and opt to correlate resilient modulus with field tests [5]. The long-term pavement performance (LTPP) program offers a large and diverse database that includes a range of laboratory-derived and field-derived properties for unbound materials of many in-service pavement sections. This study is aimed to utilize LTPP data to develop a correlation between the laboratory-derived resilient modulus and a field-derived parameter, dynamic cone penetration index (DCPI) for unbound aggregate materials. Data extracted from the LTPP database were subjected to a thorough quality check to ensure that the data are of good quality and without errors. One-on-one univariate regression was first performed to examine the significance of different variables, including DCPI and some physical properties such as dry unit weight, water content, plasticity index, percent passing No.200 sieve. The physical properties that show strong correlation were selected to be combined with field test parameter (DCPI) to conduct a multivariate regression analysis. A statistical model was developed for the prediction of resilient modulus of unbound aggregates from the DCP test parameters and physical properties. The model predicted a separate data set that did not participate in the correlation analysis, suggesting the success of applying the DCP test in evaluating the resilient modulus of pavement unbound aggregate materials.

Rice husk, in large quantities, is released to the environment due to rice production in Vietnam. If this material can be utilized, it can solve not only the economic issues but also the environmental problems and sustainable development of the country. Laboratory evaluation of asphalt mixture using Nano silica made from rice husk to improve rutting resistance of asphalt mixtures was presented in this study. A 60/70 bitumen was used as control asphalt binder. The ratio of Nano SIO2 used in this study was 0.3%, 0,6%, 0,9%, 1,2%, and 1,5% by weight of powder. A dense gradation with nominal maximum aggregate size of 12.5mm was used for the asphalt mixtures. Marshall stability (MS) test and wheel tracking (WT) test were conducted to evaluate the rutting resistance of asphalt mixtures. It was found that the asphalt mixtures using 0.5%, 1.0%, and 1.5% Nano SIO2 have the rut depths of 5.35mm, 5.39mm, and 5.45mm, respectively, which is 30%, 31% and 29% lower than the control asphalt mixtures at 15,000 load cycles. Moreover, the static modulus of asphalt mixtures using 0.9% Nano SIO2 at 60oC is higher than the control mixtures. Based on the results of this study, it can be concluded that the addition of Nano SIO2 into asphalt mixtures can enhance the rutting performance of asphalt concrete under high temperatures significantly. It is noted that these conclusions were based on only on a limited number of samples and conditions. Further studies must be conducted to investigate the effect of Nano SIO2 on fatigue cracking and moisture damage of asphalt pavement in the field.

솔수염하늘소는 소나무재선충병을 매개하는 중요한 해충으로 성충의 방제를 위하여 주로 항공살포나 지상살포에 의한 살충제의 접촉독에 의한 방제가 시행되어 왔다. 본 연구는 살충제를 나무주사하여 소나무재선충병의 매개충인 솔수염하늘소를 방제하기 위한 살충제 선발을 위해 Neonicotinoid계 살충제 7종을 각 2,000배로 희석한 후 솔수염하늘소 에 2㎕를 경구투여하여 소화중독에 의한 살충효과를 평가하였다. 살충제 경구 투여 후 신경흥분에 의한 경련반응을 조사한 결과 30분 경과에서는 Clotianidin SL(100%), Thiamethoxam DC(73.3%)이 경련 비율이 높았으며 상대적으로 Dinotefuran SL(46.7%), Imidacloprid DC(0.0%)가 약제에 대한 경련반응이 낮게 나타났다. 반수치사시간(LT50)을 조사한 결과 Clotianidin SL은 수컷에서 54.7시간, 암컷에서는 85.6시간으로 나타났으며, Thiamethoxam DC은 암컷에서 70.1시 간, 수컷에서는 88.7시간으로 나타나 소화중독 효과가 가장 우수한 것으로 나타났다. 따라서 살충제 나무주사를 이용하여 솔수염하늘소의 방제에서는 Clotianidin SL, Thiamethoxam DC가 가장 적합한 약종이라고 판단되었다.

Haemaphysalis longicornis (Acari: Ixodidae) is a medically important arthropod vector of tick-borne diseases, especially the severe fever with thrombocytopenia syndrome (SFTS). To establish a management strategy against tick-borne diseases, it is fundamental to understand the basic biology of vector species. Therefore under laboratory conditions, we evaluated the horizontal movement of adult and nymph stages of H. longicornis to better understand their dispersal behaviors. In the experiments, field populations were subjected to video recording of the horizontal movement of the ticks in a petri-dish arena for 3 hours. Our results indicate that nymphs showed a significantly higher mobility than adults, whereas there was no significant difference in angular velocity. Nymphs moved 3.74 ± 0.26 m at an angular velocity (AV) of 1.60 ± 0.07 deg/s. and adults moved 2.91 ± 0.26 m at an AV of 1.61 ± 0.14 deg/s.

Miniature pig (minipig) has been considered as an important laboratory animal in the developmental biotechnology researches with respect to xenotransplantation, stem cell, somatic cell nuclear transfer and embryo transfer. Given that the laboratory minipigs are normally housed at an indoor facility, they pass the time with lying or sleeping unless it is feeding time. Therefore, it is necessary to provide environmental enrichments to satisfy their innate needs and to lessen atypical behaviors caused by stress, on the purpose of welfare. We quantitatively investigated the type of preferable enrichment for the laboratory minipigs as well as its effect on their daily life. They presented a great interest to the pliable pail but a rapid loss of attraction to non-preferable enrichments. When the daily life of the single housed minipigs was quantified based on duration of playing or resting, they were more actively engaged in lively activities in the presence of enrichments. In addition, the provision of enrichments could effectively alleviate the conflicts during group housing when new pen mate was introduced, resulting in reduction of wound cases. We believe the considerations of animal welfare are essential to the conduct of better research because animals in the non-stressful environment will be more physiologically stable and provide more reliable results in the animal experiments.