This study analyzes the effects of the number of angles and bends on resistance in a conductor-embroidered stitch circuit for efficient power transfer through a conductor of wearable energy harvesting to study changes in power lost through connection with actual solar panels. In this study, the angle of the conductive stitch circuit was designed in units of 30°, from 30° to 180°, and the resistance was measured using an analog Discovery 2 device. The measured resistance value was analyzed, and in the section of the angle where the resistance value rapidly changes, it was measured again and analyzed in units of 5°. Following this, from the results of the analysis, the angle at which the tension was applied to the stitch converges was analyzed, and the resistance was measured again by varying the number of bends of the stitch at the given angle. The resistance decreases as the angle of the stitch decreases and the number of bends increases, and the conductor embroidery stitch can reduce the loss of power by 1.61 times relative to general embroidery. These results suggest that the stitching of embroidery has a significant effect on the power transfer in the transmission through the conductors of wearable energy harvesting. These results indicate the need for a follow-up study to develop a conductor circuit design technology that compares and analyzes various types of stitches, such as curved stitches, and the number of conductors, so that wearable energy harvesting can be more efficiently produced and stored.

This study attempts to analyze the economic impact of the service robot industry using Input-Output analysis, which is conducted based on Demand-driven model, the Leontief price model, the Backward and Forward Linkage Effects, and the Exogenous Methods. In a Demand-driven model analysis, we can conclude that the service robot industry contains characteristics of both the manufacturing industry and the service industry, which causes a positive impact on the overall industry by compensating for the weaknesses of the two industries. The Leontief price analysis indicates when wages in the service robot industry increase, prices related to robot manufacturing also increase. Also, when profits in the service robot industry increase, prices related to service provision increase, too. The Backward and Forward Linkage Effects analysis shows that the service robot industry is highly sensitive to the current economic condition and has a great influence on the service industry. The service robot industry can highlight the aspect of service characteristics when the manufacturing industry is in recession and vice versa. In addition, the service robot industry can be regarded as a value-adding and domestic economy promoting industry which utilizes knowledge of information and communication technologies. It is important to foster the service robot industry in South Korea, which is in economic recession to provide an opportunity to stimulate the growth of both service and robot industries.

The purpose of this study is to analyze the structure, status and economic ripple effects of the fisheries processing industry in Korea using interindustry analysis. Five input-output tables published over the past twenty years have been reclassified with a focus on the fisheries processing sector. Through these multi-period tables, we analyzed changes in the inducing effects in production, value added and employment as well as the backward-forward linkage effects. As a result of the analysis, it was found that the industrial scale of the fisheries processing industry is very small compared to other food manufacturing industries. The backward linkage effect of the fisheries processing industry was greater than that of other industries, but the forward linkage effect was rather low. This means that the fisheries processing industry can be greatly affected by industrial depression of the downstream industries such as fishery and aquaculture. Production and employment-inducing effects of the fisheries processing industry have shown a decreasing trend in recent years. This reflects the reality that intermediate inputs are gradually being replaced by imports from domestic production due to the expansion of market opening and the depletion of fishery resource. In the future, it is necessary to prepare a strategy to increase the value-added productivity of the fisheries processing sector and foster it as an export industry.

본 연구에서는 초고층건축물의 풍진동 모니터링을 위한 시스템식별기법의 현장적용성을 평가하였다. 실제 아웃리거-벨트월 을 횡력저항 시스템으로 가지는 실제 63층 RC구조물을 대상으로 상시 및 강풍시 응답을 모니터링하였으며, 진동수영역분해(FDD), 랜덤감소(RDT)기법, 부분공간시스템식별(SSI)법을 사용하여 진동특성을 식별하였다. 건물의 평면이 정방형이고, 두 개의 횡방향 모드의 진동수는 매우 유사하였다. 모든 식별기법에서 태풍과 같이 강한 외력이 존재할 경우 뿐만 아니라 상시미진동 에서도 구조물의 모드 특성을 식별할 수 있었다. 현장에서의 적용성 평가결과, 계산속도는 FDD가 가장 빨랐으며, RDT가 가장 간단한 프로그래밍 절차를 가지고 있음을 확인하였다.

This paper is to estimate the economic effect of benefits of the R&D and recreational fishing as well as input-output analysis in the Tae-an Trial Sea Farm Project(TTSFP). We use B/C model to indicate the effects of economic valuation. B/C analyses model consists of Benefit Cost Ratio(BCR), Net Present Value(NPV) and Internal Ration of Return(IRR). Using 5.5% discounting rates and the survey data, the sub-models show economically feasible in the all of analysis and analyzed the results as follows. NPV is 42,147 million won, BCR is 3.29 and IRR is 34.30%. This study attempts to apply input-output(I-O) analysis in connecting the economic effect of TTSFP. I-O model was constructed, focusing on three effects; the production-inducing effect, the value-added-inducing effect and employment-inducing effect. There are positive effects on economic value and job creation in Tae-an and Nation.

본 연구는 기술연관분석으로 단기 상용화를 위한 기술개발과제에 투입된 기술간 융합현황을 분석하였다. 기술연관분석은 산업구조분석의 체계를 기술기획 분야에 적용한 것이다. 본 사례는 기술연관분석을 활용하여 기술과 제품 간 연관도를 중심으로 분석하였으며 분석대상은 중소기업기술정보진흥원의 ‘’12년 중소기업 융ㆍ복합기술개발사업’에 신청한 401개 과제이다. 분석과정은 다음과 같다. 401개 개별과제에 대해서 투입된 기술은 기술로, 개발과제에서 산출을 제품으로 정의하고 이를 투입과 산출의 행렬로 정리하였다. 투입으로 정의한 기술은 국가과학기술표준분류 상의 소분류를 분류하고, 산출로 정의한 제품은 한국표준산업분류 상의 세세분류로 정의하였다. 즉, 기술을 투입으로, 제품을 산출로 정의하여 기술의 파급도를 분석하였으며 이에 기초하여 기술연관도를 작성하였다분석결과, IT융합에서는 임베디드 S/W의 기술파급도가 가장 높았으며, ET융합에서는 금형의 기술파급도가 가장 높았고 BT융합은 기능성 화장품 개발기술의 기술파급도가 가장 높았다. 전체적으로 IT융합에서 기술파급도가 높은 요소기술이 많았으며, ET융합에서 기술파급도가 높은 요소기술이 작았다. 따라서 기술파급도가 높은 요소기술에 대한 투자가 융합을 활성화하는 데 중요하며 전체적으로 IT분야가 요소기술의 투자 효과가 높을 것으로 판단한다.

Among various Power converters, a variable voltage variable frequency (VVVF) three-phase PWM inverter is regarded as most promising power converter due to its capabilities, which permits the control of voltage, frequency and harmonic contents in a single power stage employing only on DC source. As a modulating technique of the PWM inverter, the regular sampling technique has rendered possible the on-line computation and generation of PWM control waveforms with a reasonably high switching frequencies. In this paper, microprocessor based three-phase regular samping PWM inverter with real-time control algorithm and control circuits for driving three phase AC motor has been developed. Harmocic components of PWM waveform were analized theoretically in terms of Bessel function series and then calculated by digital computer and observed with spectrum analyzer

This study attempts to analyze trade flows between Vietnam and China in order to understand the mutual influence of bilateral trade relations. China is a country with the world’s leading economic potential. China and Vietnam are neighboring countries sharing a border of 1,281 km. Trade relations between the two countries are a necessity and, with a right policy, are beneficial to both. Vietnam has a trade deficit with China. This situation is exacerbated by the continuing rise in the gap. Vietnam trade deficit from China was USD12.5 billion in 2010, increasing to USD24 billion in 2018. Data are extracted from the 2015 national input-output tables of Vietnam and China as well as Vietnam Household Living Standard Survey statistics. The research identified 36 sectors of bilateral input-output trade between Vietnam and China. A bilateral output-input model is applied to analyze how final demand and use of input in the production of this country induces output and value added of the other country. The results show that China benefits more from Vietnam’s production and consumption than Vietnam does. Vietnam’s inter-sector structure does not stimulate domestic production due to the absence of supporting products as inputs in the production process.

물발자국은 제품과 서비스를 생산하는데 전과정 혹은 전체 공급망에서 사용된 담수의 양을 나타낸다. 물발자국 평가는 인간의 활동과 관련된 물의 희소성 및 오염과 관련된 정보를 파악하는데 보다 많은 정보를 주기 때문에 물소비관점에서 지속가능한 물관리에 기여할 수 있을 것으로 기대된다. 물발자국 제도의 도입을 위해서 물발자국 데이터베이스/물계정이 필수적인데 국내에서 전 산업부분에 적용할 수 있는 DB가 전무하다. 따라서 이 연구의 목적은 산업연관분석법을 이용해 국내의 403개 산업분야에 대한 물발자국 인벤토리를 개발하는 것이다. 주요 연구결과로는 농업분야의 물사용량이 전체 직접수의 79%를 차지하며, 공업분야는 간접수의 사용량이 82%로 주를 이루는 것으로 분석되었다. 물사용량은 벼가 가장 많지만, 다음은 수산양식과 과일 생산으로 조사되었고, 가장 물사용강도(m3/원)가 높은 것은 비식용작물(103,263m3/백만원)로 분석되었고, 이와 같은 결과는 비식용작물(초지생산 등)의 직접수는 많지만 경제적 가치가 매우 낮아 높은 물사용강도를 보여주고 있다. 다음은 육림, 철광석, 원목, 수산양식, 상수도, 잡곡 등의 순으로 물사용 강도가 높게 나타났다. 전체적 관점에서 총 물사용량 중 56%가 간접수가 차지하기 때문에 간접수를 고려한 산업분야의 수자원관리, 즉 공급망에서 전과정을 고려한 관리가 물사용 효율성을 높이는데 중요하다는 것을 알 수 있다. 전과정 개념과 산업연관분석법을 이용한 물사용강도 자료는 물발자국 도입시 제품단위 물발자국 산정의 기초 인벤토리로 이용될 수 있을 것으로 기대된다.

Recently according to increase of enlarged scale ports in conformity with increase in over size vessels and container handling service, pollutants generated from ports are increasing. In advanced countries, reduction in carbon dioxide emission assigned to them has been implemented according to the Climate Change Convention and Kyoto Protocol from 2008 to 2012 in order to lessen carbon dioxide emission. Henceforth increase in discussion on the measure of constructing Green Port and low-carbon port is expected in our nation's field of port as well, it is considered that the effort in reduction with regard to undesirable output which causes environmental problem of analysis target during measuring effectiveness. Therefore, in this study, effectiveness was estimated through directional technology distance function considering undesirable output differently from effectiveness analysis of existing container terminal, and then performed comparative analysis with the result analyzed with BCC output-oriented model. As the result of analysis, in 2007 DMU3 and DMU5, and in 2010 DMU2 and DMU4 appeared to be efficient terminals in BCC output oriented model, and in directional technology distance function model, DMU1, DMU3 in 2007, DMU3, DMU5 in 2008, DMU7 in 2009, and DMU2, DMU5 in 2010 appeared to be efficient terminals.

The aim of this paper is to identify Korean agricultural and agri-manufacturing cluster using a multi-regional input-output model. This paper derives a representative set of five agricultural and agri-manufacturing clusters in Korea in terms of spatial and industrial interdependency. The results show that agriculture and agri-manufacturing clusters agglomerated in Seoul Metropolitan Area and Chungcheong Area are linked both production and manufacture functions, whereas Gangwon Area is more focused on production and Jeolla Area is more concentrated on manufacture.

본 연구에서는 공급측면 산업연관분석모형을 사용하여 물공급지장이 끼치는 산업의 전방효과를 분석하고자 하였다. 여기서 분석된 공급지장비용은 수도사업의 신뢰도 결정에 사용될수 있으며 물의 공급부족이 발생할 경우 물의 효율적 배분을 위한 정책적 기초를 제공할 수 있다. 따라서 산업연관분석을 이용하여 수도부문이 차지하는 국민경제적 위치를 확인하고 공급지장으로 인한 산업간 직·간접 피해를 분석하였다. 또한 가뭄시 중요한 공급우선 순위 결정을 위한 공급지장지수를 제