본 연구에서는 용제를 전혀 사용하지않고 UV경화가 가능한 나노 실버 페이스트를 개발하였다. 무용제(solvent-free) 타입으로 개발한 나노 실버 페이스트의 점도 및 점탄성 측정하였다. 그리고 스크린인쇄로 패턴을 인쇄한 후에 UV 경화로 전극도막을 형성시켰다. 형성된 전극도막의 전도성, 연필경도, 접착력에 대해서 평가하였다. 또한 전극 도막 을 광 소결하여 전도성을 평가하였다. 마지막으로 전극도막의 경화특성은 TGA 및 FT-IR로 평가하였다. 이러한 결 과를 정리하면 UV경화만 시켰을 경우에는 전도성, 접착력, 경화특성에 대해서는 Paste(3)이 가장 우수하였다. 그러 나 광소결 후에는 Paste(1)이 가장 우수한 전도성을 얻을수있었다. 그 이유는 10nm 실버 파우더를 사용한 것이 소 결 특성이 가장 우수했기 때문이라고 판단된다.

Aerosol-type insecticides are one of the most widely used household insecticides to control mosquitoes. Not only the structural difference such as the size and shape of orifice, but also the difference in formulation including solvent system and proportion of propellent can affect the efficacy of those aerosol products. Orifice structure can be represented by nozzle diameter while solvent systems are divided into water-based and oil-based types in wide view. In the present study using Asian Tiger Mosquito, Aedes albopictus, we found that the orifice nozzle size made a significant difference in shoot-out range, followed by heterogeneous mortality by distance. Additionally, oil-based spray affected farther space than water-based one. Oil-based solvent system was also responsible for lowering the LT50 and KT50(knock-down time 50) values. Therefore, they are one of the definitive parts in insecticides formulation that determine the way of insecticide delivery. In terms of insecticide resistance management, we define efficiency of insecticide as the proportion of insecticide treated to environment that is solely acted as toxin to target pest. The higher efficiency of insecticide, the less overused chemicals we face, which may imply lower risk of resistance development. Thus, we argue that formulations, the specific route of insecticide discharge to environment, should be deliberately considered not only for consumer satisfaction, but also for insecticide resistance management.

Low foaming scouring agents (LSSA) were prepared by blending of amine salt of dodecylbenzene sulfone, poly (PO-b-EO) glycol, Newpol PP-2000, MJU-100, ethylene glycol and organic solvent. As the results of several tests, LSSA-2 showed good scouring effect, penetrating ability and emulsifiability, and showed not much water pollution. The foaming power of LSSA-2 measured by Ross & Miles method was 11mm foam height immediately after foaming. And the foaming power of LSSA-2 measured by Ross & Clark method were less than 310mm foam height at 30℃, 17mm at 80℃. As a result, LSSA-2 was proved as a good foaming scouring agent.

Low toxic concentrated oil dispersant using n-Paraffin and Di(ethylene glycol)mono butylether mixed solvent was prepared, and tested by oil dispersant performance test method, and oil dispersant efficiency was measured using vertical shaking method to 3 kinds of Crude oil, Bunker oil and W/O emulsions with different physical properties by appling the prepared dispersant. Although toxicity test was performed with Flat fish and Rock fish by appling the mixed oils emulsified using prepared oil dispersant, couldn't find the toxicity to them. Concentrated oil dispersant prepared has a good dispersion efficiency of 97.2% after 0.5min settling time and 28.3% after 10min settling time to Bunker B oil with 10% water solution. Especially, the concentrated oil dispersant showing the low toxicity to Oryzias Latipes(24hr, TLm) was 54,000 ppm and to Brine Shrimp Artemia(24hr, TLm) was 51,000ppm, and also, it was completely biodegradated to 99.1% after 7~8days.