간행물
한국응용과학기술학회지 KCI 등재 The Korean Society of Applied Science and Technology
- 발행기관 한국응용과학기술학회(구 한국유화학회)
- 자료유형 학술지
- 간기 격월간
- ISSN 1225-9098 (Print)2288-1069 (Online)
- 수록기간 1984 ~ 2024
- 주제분류 공학 > 화학공학 공학 분류의 다른 간행물
- 십진분류KDC 575DDC 665
권호리스트/논문검색
Vol.21 No.2 (2004년 6월) 10건
1.
2004.06
구독 인증기관 무료, 개인회원 유료
5,500원
2.
2004.06
구독 인증기관 무료, 개인회원 유료
According to increase of using quantity, people interested in the environmental influence by synthetic detergent. The main visible form when synthetic detergent dissolved in water is generating foams. This foam makes coating over water surface and prevents oxygen penetrating in water and make water more polluted with that result. To analyze, components and origins of the foam, and to make clear its environmental influence in this study. The analyzing objects are introducing water of sewage treatment plant from the a tributary to the Han River. After analysis, reached the conclusion like below, Analyzing foams and introducing water by sublation method, average return rate of standard LAS (1.0ppm) is 90%. LAS contents of foams analyzed by UV photometric method and HPLC method are 35.0ppm and 44.5ppm each, and AOS contents of foams analyzed by the same method are 0.6ppm and 0.4ppm each. We can find out by this study's analyzing results that the main components of foams are anion surfactant, it's content and in case of capric acid linoleic acid, it's contents.
4,000원
3.
2004.06
구독 인증기관 무료, 개인회원 유료
The adsorption of heavy metals in the waste water carried out on the various domestic clays and waste pottery. The effect of parameters such as pH, temperature, adsorption time and coexisting cations on the adsorption ability and characteristics were investigated to find out whether the clays could be used as adsorbents. Adsorption equilibrium was reached within 20 minutes on all the clays. The optimum pH was found to be above 5. When other cations such as Cu(II) or Zn(II) coexisted with Pb(II), the adsorption amount of Pb(II) decreased because of competing adsorption.
4,000원
4.
2004.06
구독 인증기관 무료, 개인회원 유료
Film forming behavior of monodispersed model composite latexes with particle size of 190 nm, which consist of n-butyl acrylate as a soft phase monomer and methyl methacrylate as a hard phase monomer with different morphology was examined. Five different types of model latexes were used in this study such as random copolymer particle, soft-core/hard-shell particle, hard-core/soft-shell particle, gradient type particle, and mixed type particle. The film forming behavior was evaluated using pseudo on-line measurements of the cumulative weight loss, the UV transmittance, and the tensile fracture energy. Each stages of film formation I, II were not sensitive to the morphology of model latexes, but stage-ill was largely dependent on the morphology of model latexes. The chain mobility of polymer which composed the shell component was found to dominantly determine the behavior of film forming stage-III.
4,000원
5.
2004.06
구독 인증기관 무료, 개인회원 유료
An aqueous solution of a commercial liquid synthetic detergent for kitchen use was photodecomposed in the presence of titanium dioxides powder under an atmosphere of air at room temperature. Titanium dioxides were prepared by sol-gel method from titanium iso-propoxide at different R ratio(H2O/titanium iso-propoxide) and calcined at 500℃. All titanium dioxides were characterized by XRD, BET surface area analyzer and UV-VIS spectrometer. The surface area of titanium dioxides prepared at R ratio=6 appeared higher volume about 20% than commercial TiO2 catalysts. XRD patterns of titania particles were observed mixing phase together with rutile and anatase type. Titanium dioxides prepared by sol-gel method show higher activity about 6% than commercial TiO2 catalysts on the photocatalytic degradation of a commercial liquid synthetic detergent for kitchen. The concentration of the detergent decreased to about 90% of its initial value at illumination times of 2 hour. Illumination for 30 minutes decreased the concentration of oxygen to about one-fifth of the initial value.
4,000원
6.
2004.06
구독 인증기관 무료, 개인회원 유료
Response surface analysis was used to study dietary ratios of n-3/n-6 fatty acid and P/S to minimize plasma triglycerides, total cholesterol and LDL · VLDL-C levels and maximize plasma HDL · C levels of rats. Because the dietary components were not statistically independent, they were studied in combinations of two variables. The two-variable combinations were the most useful in locating the desired maximum or minimum plasma triglycerides, total cholesterol and LDL · VLDL-C response in terms of the proportions of the dietary components. Response surface contours and three dimensional plots were developed for each plasma lipid response. The contours and three dimensional plots were used to help determine those combinations of the dietary fatty acid ratios that would produce the desired minimum or maximum lpid responses. The statistical analyses indicated that the minimized plasma cholesterol response levels could be attained with a diet consisting of 2.26 n-3/n-6 fatty acid and 2.15 P/S ratios.
4,000원
7.
2004.06
구독 인증기관 무료, 개인회원 유료
Low foaming scouring agents (LSSA) were prepared by blending of amine salt of dodecylbenzene sulfone, poly (PO-b-EO) glycol, Newpol PP-2000, MJU-100, ethylene glycol and organic solvent. As the results of several tests, LSSA-2 showed good scouring effect, penetrating ability and emulsifiability, and showed not much water pollution. The foaming power of LSSA-2 measured by Ross & Miles method was 11mm foam height immediately after foaming. And the foaming power of LSSA-2 measured by Ross & Clark method were less than 310mm foam height at 30℃, 17mm at 80℃. As a result, LSSA-2 was proved as a good foaming scouring agent.
4,000원
8.
2004.06
구독 인증기관 무료, 개인회원 유료
The capacity and long life of gel electrolyte batteries is connected with gas recombination producting PbO2 and Pb electrode. We prepared with sulfuric acid gel electrolyte to know gel characteristics per density to assemble valve regulated lead-acid (VRLA) batteries. We studied on actions of sulphuric acid gel electrolyte by measuring electrolyte dispersion using Brewster-angle microscope (BAM), charge-discharge cycle, and electrode structure using scanning election microscope (SEM). Sulphuric acid density 1.210 showed excellent gel dispersion in sol condition, electrode condition after fifty cycles in this study.
4,000원
9.
2004.06
구독 인증기관 무료, 개인회원 유료
Multi-walled carbon nanotubes (CNTs) were prepared by thermal chemical vapor deposition (CVD) and microwave plasma chemical vapor deposition (MPCVD) using various combination of binary catalysts with four transition metals such as Fe, Co, Cu, and Ni. In the preparation of CNTs from acetylene precursor by thermal CVD, the CNTs with very high yield of 43.6 % was produced over Fe-Co/Al2O3. The highest yield of CNTs was obtained with the catalyst reduced for 3 hr and the yield was decreased with increasing reduction time to 5 hr, due to the formation of FeAl2O4 metal-aluminate. On the other hand, the CNTs prepared by acethylene plasma CVD had more straight, smaller diameter, and larger aspect ratio(L/D) than those prepared by thermal CVD, although their yield had lower value of 27.7%. The degree of graphitization of CNTs measured by Id/Ig value and thermal degradation temperature were 1.04 and 602℃, respectively.
4,000원
10.
2004.06
구독 인증기관 무료, 개인회원 유료
On contraction of the muscles, marked changes in X-ray reflections are observed, suggesting that conformational changes of contractile molecules and the movement of myosin heads during muscle contraction. Time slice requires tension peak after the onset of stimulation and the height of tension peak depends on the number of twitch cycle. The muscles were stimulated by five successive stimuli at an interval of 80 ms started while the tension was still being exerted by the muscles. The intensity of I11, I10, 143a and 215a reflection measured with 5ms time resolution and is recorded in isometric tension. The peak height of I11 and 143a intensity is changed after the onset of a stimulation Ii, and the length of twitch is shortened by successive twitches in the case of stimulation Ti. On the other hand, the peak height of In and 215a intensity starts to decrease at the 1st twitch and remains constant at low peak height without appreciable recovery during the contraction term. In the case of successive twitch stimulation, the myosin heads of muscle are once moved from their resting position and never returned to their initial position.
4,000원
