간행물
한국응용과학기술학회지 KCI 등재 The Korean Society of Applied Science and Technology
- 발행기관 한국응용과학기술학회(구 한국유화학회)
- 자료유형 학술지
- 간기 격월간
- ISSN 1225-9098 (Print)2288-1069 (Online)
- 수록기간 1984 ~ 2024
- 주제분류 공학 > 화학공학 공학 분류의 다른 간행물
- 십진분류KDC 575DDC 665
권호리스트/논문검색
Vol.17 No.4 (2000년 12월) 9건
1.
2000.12
구독 인증기관 무료, 개인회원 유료
Sophorolipids were biosynthesized using a strain of yeast, Torulopsis bombicola ATCC22214. It has been reported that this yeast gives the highest yields for the production of biosurfactant sophorolipids. Hence, this yeast was used in this study. One of the objectives of this study is to increase the yield of the sophorolipid synthesis. To meet this end, basic culture medium was formulated on the basis of literature research to-date. When this medium was used, the increase in yield from 15% to 150% was observed compared to using the media in the literature. To examine how the interfacial characteristics of sophorolipids change with substrate, glucose (the first carbon source) was maintained in the media and after being cultured for three days, the second carbon sources such as alkanes, vegetable oils, alcohols or organic acids were added. The whole broth was extracted twice with ethyl acetate and the extract was analyzed by thin layer chromatograhy(TLC). After qualitative analyses by TLC, surface tensions of sophorolipids were measured by the Wilhelmy plate method and critical micelle concentration(CMC) was determined using these surface tension data. Also, interfacial tensions were measured by the spinning drop method and emulsions of the three-component water/decane/sophorolipid system were tested. Sophorolipids were effective and efficient in terms of surface tension reduction and CMC, but they were ineffective as emulsifiers because emulsions were separated within 30 minutes.
4,500원
2.
2000.12
구독 인증기관 무료, 개인회원 유료
Polyimide is a well-known organic dielectric material, which has not only high chemical and thermal stability but also good electrical insulating and mechanical properties. In this research, we have synthesized a polyamic acid(PAA), which is a precursor of the polyimide. To obtain the optimum conditions of polyamic acid alkylamine salt(PAAS) Langmuir-Blodgett(LB) film deposition, the π-A isotherms were examined by varying subphase temperature, barrier moving speed and spreading amount of solution. Film formation was verified by measuring transfer ratio, absorption of UV/vis spectra and scanning electron microscope(SEM) images.
4,000원
3.
2000.12
구독 인증기관 무료, 개인회원 유료
To prepare an environmental friendly high-solid coatings an acrylic resin containing 80% of solid content was synthesized by addition polymerization of caprolactone acrylate, n-butyl acrylate, ethyl methacrylate, and 2-hydroxyethyl methacrylate. The conversion was 78~93% and the prepared resin's physical properties are as follows: viscosity, 212~3424cps: Mn 1740~2400. There was a trend that viscosity and molecular weight of the resin increased with Tg, but no direct proportionality was observed.
4,000원
4.
2000.12
구독 인증기관 무료, 개인회원 유료
Two-component polyurethane flame-retardant coatings were prepared by blending trichloro aromatic modified polyesters(TCMPs) and polyisocyanate. TCMPs were synthesized by polycondensation of trichlorobenzoic acid(TCBA), a flame-retardant component, with adipic acid, 1,4-butanediol, and trimethylolpropane. The content of TCBA was varied in 10, 20, and 30 wt% for the reaction. These new flame-retardant coatings showed various properties comparable to other non-flame-retardant coatings. Moreover, we carried out the combustion test and the flammability test for our flame-retardant coatings. The results of vertical burning test for the coatings containing more than 20 wt% of TCBA were determined as 'no burn'. The results of flammability test for the coatings with 20 wt% and 30 wt% of TCBA contents indicated the limiting oxygen index(LOI) values of 25% and 28% respectively, which implied relatively good flame retardancy.
4,000원
5.
2000.12
구독 인증기관 무료, 개인회원 유료
We investigated the property of formation of mono-vesicle(designated nano-some) with using of the combined co-emulsifiers and phospholipid. Nano-some was prepared with hydrogenated lecithin(HL) and diethanolamine cetyl phosphate(DEA-CP) by swelling reaction. Kojic acid and kojic dipalmitate could be made stabilization by nano-some system using microfluidizer(MF). Nano-some has a good affinity to skin by means of this system. The composition was compounded by 2% of hydrogenated lecithin (phosphatidyl choline contained with 75%, 0.5% of DEA-CP and 0.5% of diglyceryl dioleate (DGDO). To make nano-some, several conditions of MF have to be considered as follows. The optimum pH was 6.0. The pressure was 10,000psi and passage temperature was at 306℃. The nano-some base was passed to homogenize continually 3 times through MF. The Particle size distributions of the vesicles were with in 57~75.7nm(mean 66nm) by measuring the Zetasizer-3000. Zeta potential of vesicles with 3 times passage through MF was -24.8mV. Formations for nano-some vesicle certificated photograph by scanning electric magnification (SEM). Stability of nano-some was very good for 6months. The turbidity was very good transparency compared nano-some with liposome. It was formed the mono vesicle in the opposite direction to be formed the multi-lamellar vesicle of liposome.
4,000원
6.
2000.12
구독 인증기관 무료, 개인회원 유료
Monodisperse polymer particles have many industrial applications such as surface coatings for metal panels, chromatographic media, spacers for liquid crystal display panel, and fillers for cosmetics, etc.. Micron-size monodispersed poly(methyl methacrylate) particles were prepared by dispersion polymerization in methanol medium in the presence of poly(vinyl pyrrolidone) and 2,2'-azobis(isobutyronitrile) as steric stabilizer and initiator, respectively. Effects of polymerization parameters, such as monomer and initiator concentration, stabilizer type and concentration, solvent composition on average particle size and size distribution were studied.
4,000원
7.
2000.12
구독 인증기관 무료, 개인회원 유료
Acrylic pressure sensitive adhesives of n-butyl acrylate, 2-ethyl acrylate, methyl acrylate, vinyl acetate, acrylic acid, acrylonitrile and 2-hydroxyethyl acrylate were synthesized and basic physical properties of pressure sensitive adhesives with increasing the contents of 2-hydroxyethyl acrylate were investigated. 2-Hydroxyethyl acrylates effects on glass transition temperature, viscosity, hardening time and peel strength. Glass transition temperature(Tg) decreased with increasing the contents of 2-hydroxyethyl acrylate. Viscosity and hardening time were increased with increasing the contents of 2-hydroxyethyl acrylate. On the other hands, peel strength increased with increasing the contents of 2-hydroxyethyl acrylate up to 6 wt% and the decreased at further higher contents of 2-hydroxyethyl acrylate. In peel test, interfacial failure was occured in 8 wt% and 10wt%.
4,000원
8.
2000.12
구독 인증기관 무료, 개인회원 유료
Dual-actions are the most recently used delivery system in drug study. Dual-action agents are unique chemical entities comprised of two different type of antibacterial compounds covalently linked together in a single molecule in such a way that both components are able to exert their bactericidal properties. Crosslinked sulfadiazine-sulfanilamide such as antibiotics is synthesized by synthetic handle with glutaraldehyde. As a result, New synthetic antibacterial agent exhibited the broad antibacterial activities against gram(+) and gram(-) of 4 strains and a long durability supposing that the stomach and blood.
4,000원
9.
2000.12
구독 인증기관 무료, 개인회원 유료
Cellulose tosylate(CT) was prepared by reaction of cellulose with p- toluenesulfonylchloride in DMAc/LiCl homogeneous system. In order to study a reversible photoisomerization of disperse red 1(DR-1) attached on natural polymer, cellulose tosylate containing DR-1(DR-1/CT adduct) was prepared at 110℃ in DMAc, and the changes of UV/Vis spectra of its solutions and thick film were investigated by alternate irradiation technique. Form the UV/Vis spectra of DR-1/CT adduct dissolved in cosolvents, such as DMAc, DMAc/THF, DMAc/benzene, and DMAc/chloroform and irradiated with 360 nm and 450 nm ligths, we found out changes of UV/Vis spectra were reversible in all solvents systems and we found out changes of UV/Vis spectra were reversible at thick film, also.
4,000원
