The isoflavone as a derivatives of flavone is colorless crystalline compounds. It acts on synthesis of fibronectine, collagen III, collagen I in human normal fibroblast by same biological activity to animal hormone. In this study, we tried to search and demonstrate system content rate of dermal translocation system for cosmetics using microemulsion containing isoflavone. The results of microemulsion stability test by centrifugation, storage in incubator and circulation chamber showed that separation of phase did not appear after 30 days. By the skin flexibility test, it has confirmed efficiency and effect as cosmetics materials. As the result, the microemulsion showed that skin flexibility factor improved up to 7.6%. We could confirm that O/W type microemulsion was stable system.

Oligomer type anionic surfactants(RmM-Na or RmD-Na were synthesized from C8~C16 long chain alkylvinylether and maleic anhydride (or maleic diethylether). And also their fluorescent anionic surfactants (RmF- Na) were obtained from alkali neutralization which opens the lactone ring of the condensing materials produced by maleic anhydride alkylvinylether copolymer and 3-aminophenol. The measurement results for the surface active properties of water soluble oligomer type anionic surfactants with fluorescent structure (RmF-Na) exhibited a remarkable surface tension lowing property, foam breaking property, and a ernulsing power.

The cutaneous tolerability of detergent formulations can be improved by means of suitable additives. They complex the surfactant molecules lowering the concentration of their free monomeric species. Proteins derivatives used as additives for detergency are usually prepared by partial hydrolysis of plant reserve proteins. The main purpose of the hydrolytic cleavage is to make them water soluble and suitable for liquid products. Water solubility and stability are obtained by means of complexation with surfactants which also increase their actual hydrophobicity, an important parameter affecting cosmetic properties of proteins. Transepidermal water loss (TEWL) and electric capacitance (EC) have been adopted as investigation technigues to evaluate the skin integrity/damage in vitro tests, The performance of native wheat protein / surfactant complexes has been compared with traditional protein hydrolysates as detergent additives. The results show a noticeable reduction of skin irritation in surfactant formulations with addition of native wheat protein.

Zinc complexes with Bis[2-(o-hydroxyphenyl) benzothiazolato ligands (ZnPBS-0) and Bis[2- (o-hydroxynaphthyl) benzothiazolato ligands (ZnPBS-05) were synthesized, and luminescent properties of these materials were investigated. The emission band found that it strongly depends on the molecular structure of introduced ligand and was tuned from 525 nm to 535 nm by changing the ligand structures. Spreading of the π-conjugation in 2-(o-hydroxyphenyl) group gives rise to a blue shift. On the other hand, spreading of the π-conjugation in benzothiazole groups leads to a red shift. The EL properties also showed good consistency with their differences of ligand structure. Bright-blue EL emission with a maximum luminance of 8300 cd/m2 at 11V was obtained from the organic light - emitting diodes (OLEDs) using ZnPBS-0 as emitting layer. It was also found that the newly synthesized materials were suitable to be used as emitting materials in organic EL device.

A proposed method of determining the composition of mixed micelles in equilibrium with monomer of known composition is described. The systems were sodium α-sulfonated dodecanoyl ethyl esther (α-SR12Et) or sodium dodecyl sulfate(SDS)-polyoxyethylene 23 lauryl ether (Brij 35) un water and in 0.1M sodium chloride solution at 25℃. This technique applies the Gibbs-Duhem equation to the mixed micelles, which is treated as a pseudophase. This proposed methodology, which needs only critical micelle concentration data as a function of monomer composition, is applied to an anionic/nonionic surfactant pair. The calculated monomer-micelle equilibrium is found to be very similar to the much-used regular solution for nonideal systems.

While the equilibrium behaviour of surfactant solution is well studied, the understanding of the kinetics and pathways of structural transition under nonequilibrium conditions is only begining to develop. Attention has recently been directed mainly towards micellar kinectics, transitions between micellar and lamellar phases, vesicle fusion, and phases separation in microemulsions. This progress has profited greatly from developments that have taken place in various techniques and instruments.

Micelle formation and adsorption at the Ti02 interface of a series of polystyrene-polythylene oxide(PS-PEO) block copolymer in aqueous solution was studied using fluorescence probing and small-angle X-ray methods. Further, the stability of aqueous Ti02 dispersion in the presence of copolymer was investigated by microelectrophoresis, optical density and sedimentation measurements. The dissolution of pyrene as fluorescent probe in aqueous surfactant solution leads to a slow decrease of the I1/I3 ratio, as the copolymer concentration increase; I1 and I3 are respectively the intensities of the first and third vibrionic peaks in the pyrene fluorescence emission. The behaviour was due to the characteristics of the copolymers and/or to the copolymer association efficiency in water. Moreover, the adsorption at the plateau level increases with decreasing PEO until chain length. The zeta potential of TiO2 particles decreases with increasing copolymer concentration and reaches a plateau value. Finally, stabilization using block copolymers was more effective with samples having higher weight fractions of PS block.

Density, viscosity, conductance, dye solubility and carbon-13 nmr studies were performed in aqueous solution of three disodium 4-n-alkyl-3-sulfonatosuccinate anionic surfactant at 20℃. The cmc values were 0.14 mol/l for the disodium-4-n-octyl-3-sulfonatosuccinate(R8)S), 0.041mol/l for the disodium-4-n-decyl-3-sulfonatosuccinate(R10S), and 0.018mol/l for the disodium-n-dodecyl-3-sulfonatosuccinate 〈R12S). The aggregation numbers determined viscometrically and conductimetrically were 28 for R8S, 48 for R10S, and 67 for R12S. The volume changes upon micellization were 8.9cm3/mol for R8S, 9.5cm3/mol for R10S, and 10.1cm3/mol for R12S. Binding constants for the dye pada to the micelles and the fractions of unbound counter-ion were also obtained. The two polar heads with their carbon linkage were likely in an aqueous environment in the R8S micelles with the micelles themselves being spherical.

Recently, there has been considerably interested in the development to new functional gemini type anionic surfactant, sodium bis-n-alkyl sulfonatosuccinate, had been synthesized through the addition reaction of sodium bisulfite to bis-n-alkyl maleate, in which water was azeotropically distilled by adding benzene to the reaction system, gave a good yield. All the surface activities including krafft point, surface tension, emulsion power and foaming were measure and cmc was evaluated in dilute solution. This results showed a lower ability in 27~30dyne/cm than single-chain surfactant with 32~35dyne/cm to surface tension. Also its cmc value much smaller in (6.5~10)×10-4mcal/l than single-chain surfactant with (40~45)×10-4mcal/l concentration. In foaming ability and foam stability of gemini surfactant had especially a good ability in approximately 100~150ml, and in emulsing power they exhibited a good emulsing phase and stability, and Krafft points were 0~10℃.

Allylaliphatic carboxylate oligomers were prepared from polymerization giving allyl aliphatic carboxylates in the presence of potassium persulfate in methanol and the α-sulfonation of these allyl aliphatic carboxylates oligomers were carried by direct addition of dry sulfur trioxide. The dispersing performance of oligomer type anionic surfactants and SDS in the aqueous suspension of Fe2O3 and Tio2 particles were evaluated by particle size distribution and ξ-potential measurement. As results, the particles of Fe2O3 and Tio2 were flocculated by addition of small amount of oligomer type anionic surfactants and SDS, then the flocks redispersed by more addition oligomer type anionic surfactants and SDS. The dispersion and flocculation were observed in lower concentration range of oligomer type anionic surfactants than SDS.

These N-acyl amino acid surfactants is normally produced by reaction of acid anhydride with sodium l-glutamate hydrolysates under Schotten-Baumann condition i.e., in alkaline aqueous medium. To avoid using fatty acid chlorides, acylations were also carried out with the fatty acids themselves or with their methyl esters, but unfortunately these methods cannot be used in practice, dodecenyl succinic anhydride, was to be studied for their suitability as acylating agents the production if acylated glutamine hydrolysates. The surface activities including surface tension forming power, forming stability and emulsifying power were measured. The experimental results revealed that the products have a good emulsifying power. Thus, there derivatives will be expected to be used an emulsifying agent for O/W type cosmetic emulsion.

Acrylic pressure sensitive adhesives of n-butyl acrylate, 2-ethyl acrylate, methyl acrylate, vinyl acetate, acrylic acid, acrylonitrile and 2-hydroxyethyl acrylate were synthesized and basic physical properties of pressure sensitive adhesives with increasing the contents of 2-hydroxyethyl acrylate were investigated. 2-Hydroxyethyl acrylates effects on glass transition temperature, viscosity, hardening time and peel strength. Glass transition temperature(Tg) decreased with increasing the contents of 2-hydroxyethyl acrylate. Viscosity and hardening time were increased with increasing the contents of 2-hydroxyethyl acrylate. On the other hands, peel strength increased with increasing the contents of 2-hydroxyethyl acrylate up to 6 wt% and the decreased at further higher contents of 2-hydroxyethyl acrylate. In peel test, interfacial failure was occured in 8 wt% and 10wt%.

A conductimetric study of foam formed from mixture of the protein, β-lactoglobulin, and the nonioinc surfactant, SML, revealed that their stability was reduced at concentrations of SML in the range 3~10mM. The interaction of SML with β-lactoglobulin was investigated by fluorimetry and a dissociation constant of 0.2μM was calculated for the complex. Surface tension studies confirmed the presence of interaction between the two components and provided evidence for the progressive displacement of β-lactogloblin from the air/water interface with increasing SML concentration. Experiments using air-suspended microscopic thin liquid films revealed transitions in the chainage characteristics and thickness of the film at SML concentrations below that which resulted in destabilization of the foam. However, measurements of surface mobility of fluorescent-labeled β-lactoglobulin by a photobleaching method identified that a transition to a mobile system occurred at a SML concentration which correlated with the onset of instability in the disperse phase. The results would indicate that maintenance of the viscoelastic properties of the surface is paramount importance in determining the stability of interfaces comprising mixtures of protein and surfactant.

The synthesis of N-methyl glucamine was performed in two step reaction. The first step involves the amination between methylamine and glucose in methane. The N-methyl glucamine was obtained by the reduction of using Ni catalyst under the high pressure. The second step was glucamide anionic derivatives synthesis from N-methyl glucamine, maleic anhydride, lauryl alcohol and laurylamine by Schotten Banmann reaction respectively. Their molecular structures of N-methyl glucamine and glucamide (EG-MAS and AC-MAS) were investigated by IR and 1H-NMR. Basic physical properties and biodegradability of there glucamide anionic surfactant was investigated. The range of cmc values determined by measurements of surface tention was 10-5~10-4mol/l and the surface tension of the aqueous solution revealed in the range 28~30 dyne/cm and their biodegradability was very good in the pH 5~10.

Surface tension as a function of concentration and temperature was measured for aquous solution of sodium N-acyl sarcosinate, RCON(CH3)CH2 COONa, From the intersection points in the (γ-logC) curves, the critical micelle concentration (cmc) was determined at 20, 30, 40, and 50℃. Structural effects on the cmc maximum and the minimum area per molecule at the aquous solution/air interface were discussed. The free energy, enthalpy, and entropy of micellization and adsorption of surfactant solution also were investigated. Numberous investigators have dealt with sodium N-acyl sarcosinates and their applications as wettings, flooding and reducing agents and as corrosion inhibitors.

Physical properties and performance characteristics of sodium salt of several pure N-acyl amino acids made from glycine, dl-alanine, sarcosine, dl-valine, l-leucine, l-aspartic acid and l-lysine seven long chain fatty acids are reported. The effect of acyl chain length and the differences in the structure of constituent amino acid of seven homologous series of amide intermediate linked carboxylate surfactant of this class on the properties are discussed.

Sodium N-acyl N-methyl taurates were synthesized by effectual acylation of fatty acid ethyl esters C(C12~C18) and N-methyl taurine. All the surface activities including krafft point, solubility, interface tension, foaming power, lime-soap dispersing ability and detergency were measured, and cmc was evaluated in dilute aqueous solution.

Several instances of synergistic interaction have been identified between alkyl amine oxide and long chain fatty acohol polyethoxylates in various surfactant formulation. The purpose of this study was examined whether these benefits could be observed within the framework of generic hand-surface cleaning formulations. Comparative evaluation were also carried out to determine the performance characteristics of low-and zero-phosphate systems in which amine oxide and alcohol ethoxylates are used. Best cleaning was observed with 1:1 mixtures of the subject surfactants, but substantial improvements over fatty alcohol ethoxylate alone also were noted with formulations that contained lower ratios of amine oxide

Spherical alumina powders were prepared by the controlled hydrolysis of aluminum iso-propoxide in a solution consisting of n-octyl alcohol and acetonitrile. As aluminum alkoxide's concentration increased, the particle size was increased and size distribution was more broad. As-prepared particle morphology was not spherical when acetonitrile volume fraction was increased over than 60%. As-prepared amorphous powders crystallized to γ-alumina at 1000℃ and converted to α-alumina at 1150℃. The particle morphology was retain after crystallization α-alumina. When aluminum iso-propoxide was used as aluminum source, the optimum preparation condition of spherical alumina was 0.1M AIP, 0.2M H2O, 0.1g/l HPC with a volume fraction (1/1) of the n-octyl alcohol/acetonitrile, 10min of reaction time and 30min of aging time.

소포제의 주성분으로 소수성 알킬기 탄산수가 12에서 18까지의 고급지방알코올, 고급지방산, 고급지방산에스테르를 사용하였다. 제조한 소포제의 입도분포, 온도, 농도에 대한 소포 특성을 1L/min의 유속하의 ASTM 방식의 Air Injection Method로 측정하였고, 표면장력과 유화력을 측정하였다. 이들 소포제의 입도분포에 대한 소포특성은 입도분포가 5.5~6.8μm 범위인 소포제 조성물이 우수한 소포제 특성을 보였다. 묽은 수용액상에서 소포제의 표면장력은 농도가 10-2wt%에서 33~34 mN/m 범위였고, 고급 지방산 알코올을 사용한 소포제 조성물의 유화력이 우수하였다.