본 연구는 기본신체동작(BBA)을 바탕으로 한 한국무용, 현대무용, 발레의 순수무용에 무용/동 작심리치료를 접목한 Will Dance 프로그램이 고령자들의 우울에 미치는 효과를 검증하고자 하는 목적에서 진행되었다. 프로그램에서는 노인들이 기본신체동작들을 수행함으로써 관절운동 및 신 체활동을 재 활성화시켜 고령화로 인한 신체 경직이나 퇴화 현상을 완화시키는데 영향을 줄 뿐 만 아니라 자신감과 자아 존중감의 회복, 우울감을 회복하여 궁극적으로는 심신의 안정을 도모 하고자 하였다. 연구의 참여자는 대전시 서구 도마동의 A경로당과 대전시 동구 판암동 B경로당 두 곳에서 진 행되었다. 집단의 대상자들은 65세 이상의 고령자 총 31명으로 2012년 4월 20일에 사전검사를 시작하여 2012년 7월 20일의 사후검사까지 Will Dance 프로그램을 주 2회 회기 당 60분씩 시행 하였다. 연구 자료의 수집은 프로그램 사전/사후에 대상자들의 자기보고식 설문지 작성으로 한 국형 노인 우울 검사(KGDS)를 활용하였다. 고령자를 대상으로 Will Dance 프로그램을 적용한 결과, 참여자들의 우울과 우울의 하위영역 들에 유의한 효과가 있음이 검증되었다. 이는 인간의 기본신체동작을 바탕으로 한 순수무용에 무용/동작심리치료를 접목한 Will Dance 프로그램의 연구가 신체적 기능의 향상 뿐만 아니라 심 리 치유/힐링적 프로그램으로서도 효과가 있었으며, 이는 궁극적으로 고령자의 삶의 질 향상에 효과가 있음 시사하고 있다.

유화제만을 사용하는 것 보다 더 좋은 유화특성을 갖는 유화보조제에 관한 연구이다. 그 화합물들은 숙신산과 프로필렌글리콜과의 에스테르화 반응에 의하여 합성되었다. 그 구조는 FT-IR과 1H-NMR 분석으로 확인하였다. 표면장력, 임계미셀농도(cmc), 유화력 등 계면특성을 각각 주어진 조건하에서 시험하였다. 그 수용액의 표면장력은 33-35 dyne/cm 이었고, cmc는 표면장력법에 의하여 산정하였다. 그리고, 유화력은 호호바오일의 경우 우수하였다. 결과적으로 합성한 디프로필렌글리콜 숙시네이트는 O/W 유화에서의 유화보조제로서 응용이 기대된다.

It was researched to be alternative of TGIC type hardener with human hazard element as PT 910 mix powder paint with hardener. Generally PT 910 was compared with TGIC & Epoxy resin of hardener to be used at thermosetting powder paint. We inquired a property of matter for paint through Gel time, glass transition temperature, melting point and a property of matter for film through a property of adhesion, a property of tolerance, softness, gloss, acid-resistant, alkali-resistant, salt water spray-resistant, facilitation climatic. When PT 910 is used of hardener, it was shown the excellent results in gel time, softness, salt water spray-resistant, fracilitation climatic and the similar results in melting point, a property of tolerance, a property of adhesion, gloss, acid-resistant, alkali-resistant, as compared with the powder paint used by TGIC hardener. The glass transition temperature was little low. But there was slightly different results. After the study results, we reached the conclusion that thermosetting powder used by PT 910 is alterative to by TGIC hardener.

Polyurethane adhesive is used in various fields as flexible packaging materials including a food packaging field. Therefore, the purpose of this study is synthesis of polyurethane adhesive which uses aliphatic isocyanate, and compares with aromatic isocyanate. The isocyanates for this test are toluene-2,4-diisocyanate(TDI), hexamethylene diisocyanate(HDI), 4,4-dicyclohexyl ethane diisocyanate(H12MDI), and isophorone diisocyanate(IPDI). And, the effect of any other diisocyanate are evaluated by several methods as for curing rate test, accelerate weathering test, and peel strength test. The polyurethane adhesive using curing catalyst and HDI has adhesion strength of about 560 g/15 mm between aluminium foil and nylon, about 1,520 g/15 mm between nylon and CPP. Those parameters are similar to polyurethane adhesive with TDI. Also, in case of curing rate, those are similar to TDI type polyurethane adhesive. Moreover, data of δE as color variation by QUV tester is equal to 4.12, as 48% against those of TDI type.

Micelle formation and adsorption at the Ti02 interface of a series of polystyrene-polythylene oxide(PS-PEO) block copolymer in aqueous solution was studied using fluorescence probing and small-angle X-ray methods. Further, the stability of aqueous Ti02 dispersion in the presence of copolymer was investigated by microelectrophoresis, optical density and sedimentation measurements. The dissolution of pyrene as fluorescent probe in aqueous surfactant solution leads to a slow decrease of the I1/I3 ratio, as the copolymer concentration increase; I1 and I3 are respectively the intensities of the first and third vibrionic peaks in the pyrene fluorescence emission. The behaviour was due to the characteristics of the copolymers and/or to the copolymer association efficiency in water. Moreover, the adsorption at the plateau level increases with decreasing PEO until chain length. The zeta potential of TiO2 particles decreases with increasing copolymer concentration and reaches a plateau value. Finally, stabilization using block copolymers was more effective with samples having higher weight fractions of PS block.

Several instances of synergistic interaction have been identified between alkyl amine oxide and long chain fatty acohol polyethoxylates in various surfactant formulation. The purpose of this study was examined whether these benefits could be observed within the framework of generic hand-surface cleaning formulations. Comparative evaluation were also carried out to determine the performance characteristics of low-and zero-phosphate systems in which amine oxide and alcohol ethoxylates are used. Best cleaning was observed with 1:1 mixtures of the subject surfactants, but substantial improvements over fatty alcohol ethoxylate alone also were noted with formulations that contained lower ratios of amine oxide

In the separation of toluene/n-heptane mixture by the emulsion type liquid membrane in a batch system, the effect of surfactants on the separation factor and membrane stability were studied over the surfactant concentration ranging from 0.1 to 1.5 wt% at the contact time of 5 and 10 minutes and the settling time 5 and 10 minutes. The surfactants used were triethanol amine lauryl sulfate. The separation factor reached its maximum value at the surfactant concentration of 0.5 wt%. It was found that the percentage of membrane breakup reached its minium values and the separation factor showed its maximum value at the surfactant concentration of 0.5 wt%, which confirmed that efficient separation could be effect when emulsion liquid membrane were stable because of low membrane break up.

HF purification performance of an ion exchange membrane(IEM) was evaluated with 0.5% HF spiked with 10ppb of Fe, Ni and Cu nitrates. The result show that after less than five turnovers through an IEM, the metallic impurity concentration drops below 1ppb. The decrease rate can be fitted to a model assuming the experimental tanks to be continuously stirred tank reaction and that the metallic impurity concentration after the IEM is a function of the single-pass purification efficiency of the membrane, the concentration before purification and the metals desorbed form the IEM. The Concentration after purification was investigated up to a cumulative Fe loading of 300ppb in the 23 liter recirculated loop. It increases linearly vs. cumulative loading and can be explained by the Langmuir theory resulting in a purification efficiency at the equilibrium of close to 99.5% in this loading regime.

We used Cu as a representative of metals to be directly adsorbed on the bare Si surface and studied its removal DHF, DHF-H2O2 and BHF solution. It has been found that Cu ion in DHF adheres on every Si wafer surface that we used in our study (n, p, n+, p+) especially on the n+-Si surface. The DHF-H2O2 solution is found to be effective in removing metals featuring high electronegativity such as Cu from the p-Si and n-Si wafers. Even when the DHF-H2O2 solution has Cu ions at the concentration of 1ppm, the solution is found effective in cleaning the wafer. In the case the n+-Si and p+-Si wafers, however, their surfaces get contaminated with Cu When Cu ion of 10ppb remains in the DHF-H2O2 solution. When BHF is used, Cu in BHF is more likely to contaminate the n+-Si wafer. It is also revealed that the surfactant added to BHF improve wettability onto p-Si, n-Si and p+-Si wafer surface. This effect of the surfactant, however, is not observed on the n+-Si wafer and is increased when it is immersed in the DHF-H2O2 solution for 10min. The rate of the metallic contamination on the n+-Si wafer is found to be much higher than on the other Si wafers. In order to suppress the metallic contamination on every type of Si surface below 1010atoms/cm2, the metallic concentration in ultra pure water and high-purity DHF which is employed at the final stage of the cleaning process must be lowered below the part per trillion level. The DHF-H2O2 solution, however, degrades surface roughness on the substrate with the n+ and p+ surfaces. In order to remove metallic impurities on these surfaces, there is no choice at present but to use the NH4OH-H2O2-H2O and HCl-H2O2-H2O cleaning.

계면활성제는 수용액에서 미셀을 형성함에 있어서 자기확산이 분자 운동과 상변화에 대하여 자세한 정보를 제공하고 공업적으로 응용할 수 있는 기술이 점차 증가하고 있다. 계면활성제가 미셀을 형성함에 있어 자기확산 정도는 화학구조의 변화성과 상호 결합 및 회합현상에 매우 민감한 것은 사실이다. 특히 계면활성제 용액의 넓은 범위의 분자 시스템과 콜로이드 상태의 변화성은 다향한 물리, 화학적 성질에 기여됨이 많다. 더욱이 미셀 형성에서 자기확산 계수는 분자 치환에 직간접적으로 상호관계가 있어 NMR 분광학에서 스핀 이완속도의 해석과 분자의 재배열, 스핀 이완에 대한 모델선정 등에 많은 관심을 갖는다. 그중 미셀형성에 있어서 자기확산에 대한 측정 방법중 가장 많이 이용되고 있는 Fourier Transform Pulsed Gradient Spin Echo(FT-PGSE) 측정법은 계면활성제의 미셀형성에 대한 상변화성 및 물리, 화학적 성질을 다루는데 새로운 도구로 제공되고 있다. 이는 이 계통의 기술적 측정방법에 있어서 적절한 개선과 새로운 응용분야를 확장하는데 있어서 많은 가능성을 갖고있다. 그리하여 이들에 대한 역사적 배경과 기초적인 이론을 가지고 미셀 형성에 있어 자기확산에 대한 개념을 말하고 그에 대한 응용성을 계통적으로 설명하고자 한다.

폴리올류 비이온성 계면활성제인 sucrose monolaurate, sucrose monomyristate, sucrose monopalmitate, sucrose monostearate 그리고 sucrose monooleate와 같은 5종의 sucrose monoester 유도체들을 선택하여 묽은 수용액내에서 임계미셀 농도와 미셀화 영역을 결정하는 방법으로서 컴퓨터 프로그래밍에 의한 표면장력 곡선의 최대화를 제안하였다. 임계미셀 농도와 미셀화 영역은 몇몇 실험치를 직접 프로그램에 대입함으로써 곡선의 최대화에 의해서 이론적으로 산정할 수 있다. 이론적으로 구한 임계미셀 농도값들은 실측치와 거의 일치함을 알 수 있다.