In this paper, the combustion characteristics of constant volume combustion chamber(CVCC) were experimentally investigated when biodiesel is mixed with pure gasoline. The experiment was performed on two gasoline biodiesel samples designated by GB05 and GB20 which is mixed with 5% and 20% biodiesel respectively. It was confirmed that the ignition delay time decreases as the temperature of injection engine increases due to ignition delay. Also, it was shown that the ignition delay time decreases as the biodisel mixing ratio increases from 5% to 20%.

Smart phones are currently the most popular electronic devices with high volume production activities driven by high demand and requirements for rapid turnaround time. The changes of displacement were analyzed according to a variable of the gate size and runner system. The radial type and gate with large size were shown that better results in displacement. While the design and production of lenses, the key component of a camera, still need to be improved, the current technology has run into its limit with regard to trends in size and weight reduction. In this study, an injection molding analysis was performed on plastic lenses that are widely employed for smart phone cameras. Specifically, the displacement of lenses at the time of injection molding was studied by varying the gate size and runner system.

This paper describes the development of precision gear pump for transmitting source material of chemical machinery. Gear pump design is carried out considering geometry of gear and strength of shaft by CAE program. Teeth of gear is machined by ultra precision grinding, and by inspection of profile and lead, JIS 0-grade gear is manufactured. Through the pump performance test, pump discharge volume per one revolution is in a good agreement with the target values when varying rotational speed and working temperature.

In the separation of toluene/n-heptane mixture by the emulsion type liquid membrane in a batch system, the effect of surfactants on the separation factor and membrane stability were studied over the surfactant concentration ranging from 0.1 to 1.5 wt% at the contact time of 5 and 10 minutes and the settling time 5 and 10 minutes. The surfactants used were triethanol amine lauryl sulfate. The separation factor reached its maximum value at the surfactant concentration of 0.5 wt%. It was found that the percentage of membrane breakup reached its minium values and the separation factor showed its maximum value at the surfactant concentration of 0.5 wt%, which confirmed that efficient separation could be effect when emulsion liquid membrane were stable because of low membrane break up.