간행물
한국응용과학기술학회지 KCI 등재 The Korean Society of Applied Science and Technology
- 발행기관 한국응용과학기술학회(구 한국유화학회)
- 자료유형 학술지
- 간기 격월간
- ISSN 1225-9098 (Print)2288-1069 (Online)
- 수록기간 1984 ~ 2024
- 주제분류 공학 > 화학공학 공학 분류의 다른 간행물
- 십진분류KDC 575DDC 665
권호리스트/논문검색
Vol.18 No.4 (2001년 12월) 10건
1.
2001.12
구독 인증기관 무료, 개인회원 유료
A proposed method of determining the composition of mixed micelles in equilibrium with monomer of known composition is described. The systems were sodium α-sulfonated dodecanoyl ethyl esther (α-SR12Et) or sodium dodecyl sulfate(SDS)-polyoxyethylene 23 lauryl ether (Brij 35) un water and in 0.1M sodium chloride solution at 25℃. This technique applies the Gibbs-Duhem equation to the mixed micelles, which is treated as a pseudophase. This proposed methodology, which needs only critical micelle concentration data as a function of monomer composition, is applied to an anionic/nonionic surfactant pair. The calculated monomer-micelle equilibrium is found to be very similar to the much-used regular solution for nonideal systems.
4,000원
2.
2001.12
구독 인증기관 무료, 개인회원 유료
The Mo(V) di-μ-oxo type [Mo2O4(H2O)2L2] SO4 complexes(L: 2,2'-dipyridyl,4,4'-ethylenedianlline) have been prepared by the reaction of [Mo2O4(H2O)6]SO4 with a series of chelate ligands. These complexes are completed by two terminal oxygens arranged trans to one another and each ligand forms a chelate types. In Mo2O4(H2O)2L2, two H2O coordinated at trans site of terminal oxygens. The prepared complexes have been characterized by elemental analysis, infrared spectra, 1H nuclear magnetic resonance spectra, and thermal analysis(TG-DTA). In the potential range -0.00V to -1.00V at a scan rate of 50mVs-1, a cathodic peak at -0.81V ~ -0.87V (vs SCE) and an anodic peak at -0.61V ~ -0.63V (vs SCE) have been observed in aquous solution. We infer these redox are irreversible reaction.
4,000원
3.
2001.12
구독 인증기관 무료, 개인회원 유료
An ACR/HMMM film was prepared by blending high-solid ACR with curing agent, hexamethoxymethyl melamine (HMMM). An active curing reaction was observed at 170℃. The dynamic viscoelastic Tg of the final film increased with the static viscoelastic Tg of the film. The log damp value, which means a viscoelastic ratio, decreased with the increase in the curing temperature of the film. Physical properties of the films were within a suitable range for films, and by an accelerated weathering resistance test the films were proved weather resistible ones.
4,300원
4.
2001.12
구독 인증기관 무료, 개인회원 유료
A series of microcapsule were synthesized by using several PCM(Phase Change Material) as a core material and gelatin/arabic gum, melamine/formaldehyde as a shell material. Coacervation technique and in situ polymerization were adopted in synthesizing microcapsules. In the microencapsulation by coacervation, tetradecane and octadecane were used as core materials. In the microencapsulation by situ polymerization tetradecane, pentadecane, hexadecane, heptadecane, octadecane, and nonadecane were used as core material. The synthesized microcapsule was examined to observe the shape of the microcapsule. The particle size analysis was performed by particle size analyzer. The thermal properties(e.g. melting point, heat of melting, crystallization temperature, heat of crystallization, differences between melting point and crystallization temperature) were obtained by DSC(Differential Scanning Calorimeter). The stirring rate effect was investigated during the microencapsulation. It was found that with increasing the stirring rate much smaller microcapule was produced. However, this did not necessarily lead to formation of spherical microcapsule.
4,300원
5.
2001.12
구독 인증기관 무료, 개인회원 유료
The liquid body foam which added the garlic extract, differs for clothes and kitchen detergent, industrial and domestic detergent, and it has various characteristics as a soft detergent for bath and hair product. The contents of various characteristics in this experiment have tested for the foam formation force, the moisture force and the antimicrobial force. In case of this product adding garlic extrat, we could know the three characteristics. In first case to increase the concentration of Sunfom-S, we could know that the foam formation force increases following to it. In second case to increase the concentration of propylene glycol, we could know that the moisture force increases following to moisturing agent. In third case to increase the concentration of garlic extract, we could know that the antibiosis and preservation efficacy appears between 3.0-4.0wt% and the sterilization efficacy appears more than 5.0wt%. According to the result of this experiment, we could recognize the characteristics concerning to quality of this product.
4,000원
6.
2001.12
구독 인증기관 무료, 개인회원 유료
Zinc complexes with Bis[2-(o-hydroxyphenyl) benzothiazolato ligands (ZnPBS-0) and Bis[2- (o-hydroxynaphthyl) benzothiazolato ligands (ZnPBS-05) were synthesized, and luminescent properties of these materials were investigated. The emission band found that it strongly depends on the molecular structure of introduced ligand and was tuned from 525 nm to 535 nm by changing the ligand structures. Spreading of the π-conjugation in 2-(o-hydroxyphenyl) group gives rise to a blue shift. On the other hand, spreading of the π-conjugation in benzothiazole groups leads to a red shift. The EL properties also showed good consistency with their differences of ligand structure. Bright-blue EL emission with a maximum luminance of 8300 cd/m2 at 11V was obtained from the organic light - emitting diodes (OLEDs) using ZnPBS-0 as emitting layer. It was also found that the newly synthesized materials were suitable to be used as emitting materials in organic EL device.
4,000원
7.
2001.12
구독 인증기관 무료, 개인회원 유료
Emulsified transesterification of soybean oil into biodiesel was investigated using potassium hydroxide and sodium methoxide catalysts with methyl glucoside oleic polyester as a methanol-in-oil emulsifier. The transesterification reaction conditions were optimized to obtain high yields of fatty acid methyl esters of the quality defined by biodiesel standards. The developed process resulted in 95~96% of overall yield from soybean oil by alkali-catalyzed methanolysis at 45℃ of reaction temperature with 6:1 of methanol-to-oil molar ratio and 1(v/v)% methyl glucoside oleic polyester in the presense of 0.8wt% KOH and 1.2wt% NaOCH3.
4,000원
8.
2001.12
구독 인증기관 무료, 개인회원 유료
Our study is aimed at proposal of systematic verification method of molecular structure using measuring method of selective ionic determination and spectrometry on 34 kinds of surfactants such as sodium dodecyl sulfate(SDS) which are most widely used today. In the IR spectrum, unsaturated fatty acids reveal themselves by HC= at 3000~3020cm-1, and intensity of 720cm-1 depends on carbon length of alkyl group. Also ethylene oxide(EO) adducts exhibit weak characteristic bands by -CH2-CH2-O at 1350, 1100 and 950cm-1. Isethionate can be distinguished from diester succinate by intensity ratio of 1740 and 1200cm-1 spectrums, the ratio of latter is close to 1 due to 2 carboxylate radical in diester succinate. Quaternary ammonium salts exhibit characteristic band of C4N+ at 1000-900㎝-1. In the case of dialkyl dimethyl ammonium salts in quaternary ammonium surfactants, the spectrum of 3000cm-1 by N-CH3 collapses to a very weak band at 3020cm-1. In ammonium heterocyclic derivatives, pyridinium salts show characteristic bands at 1640 and 1460cm-1, while imidazolinium salts exhibit characteristic band at 1620-1610cm-1. In the characteristic spectrum at 1080-1050cm-1 on OH radicals of the alkyl esters, primary alcohol appears as weak band and the 2 bands show in almost same intensity when primary and secondary alcohols exist together in one molecule. Also, alkyl ester of polyhydric alcohols appears as various broad band.
4,000원
9.
2001.12
구독 인증기관 무료, 개인회원 유료
To prepare an acrylic type pressure-sensitive adhesive, quarternary polymers were synthesized from butyl acrylate (BA), 2-ethyl hexyl acrylate (2-EHA), methyl methacrylate (MMA), and 2-hydroxy ethyl methacrylate (2-HEMA). The quarternary polymers were identified by FT-IR and Molecular weight was measured by Gel Pearmeation Chromatography. Also, viscosity, solid content and peel strength were examined. The peel strength was 160 gf/25 mm when the volume ratio of feed monomer to solvent was 1.3:1, and the ratio was relevant to commercial usage. The pot life of adhesive was 30 sec at the 50 m/min of heat treatment rate at, and it indicated that the minimum drying time was 30 sec. In weathering resistance test, peel strength of 160~180 gf/25 mm after 1000 h, with no residual remains on the adhesive surface.
4,000원
10.
2001.12
구독 인증기관 무료, 개인회원 유료
The critical micelle concentration (CMC) at which micelles start to form from a surfactant solution is usually measured in terms of conventional concentration units. However, the thermodynamic potentials are expressed in terms of mole fraction XCMC and XCMC cannot be directly measured experimentally. The Gibbs free energy, δG*mic, in particular is related to XCMC through δG*mic = RTlnXCMC. When it comes to CMC, the molar CMC, CCMC, differs only by the proportionality C-1w with Cw being the molarity of water. Hence, CCMC is found to be a proper representation of CMC. However, in calculation of δG*mic and other thermodynamic potentials from the CMC, XCMC or CCMC/Cw should be used.
4,000원
