본 논문은 바이오폴리우레탄의 연구동향에 관한 것이다. 바이오폴리우레탄은 원료 중의 식물유 폴리올과 이소시아네이트의 중부가 고분자이다. 피마자유의 주성분은 히드록시기를 갖는 리시놀산의 트리글리세라이드이다. 이외의 히드록시기가 없는 식물유는 이중결합 위치에서 에폭시화 후 고리열림, 히드로포르밀화 후 수소첨가, 가오존분해 후 수소첨가, 티올-엔 반응으로 히드록시기를 부여한다. 폴리올의 반응성 및 마이크로도메인의 모폴로지 조절을 위한 하이퍼브랜치 폴리올, 일차 알코올 폴리올, 다당류 폴리올이 있다. 의료용의 생분해성 폴리락트산 폴리올, 가수분해 방지용 지방산 다이머 폴리올, 이온성 기를 함유한 수 분산 폴리우레탄용 폴리올이 있다. 바이오폴리올을 이용한 바이오폴리우레탄은 경질 및 연질 폼, 코팅제, 접착제, 실런트, 엘라스토머에 쓰인다.

천연 복분자는 나무딸기 또는 산딸기로부터 얻어진 한방재료로 사용되어 지고 있다. 천연 복분자 나무딸기 또는 산딸기는 천연의 향기와 맛, 천연의 색상, 그리고 약리, 화학적 특성을 가지고 있다. 천연 복분자 추출물을 사용하여, 특성실험으로 미생물에 대한 항균실험과 섬유에 대한 염색실험을 하였다. 본 특성실험에서 다음과 같은 결론들이 얻어졌다. 항균실험 결과 ATCC-001(staphylococcus aureus)의 경우는 배양시험 후 72hrs 부터 미생물이 거의 나타나지 않았으나 ATCC-002(aspergillus niger)의 경우 배양시험 후 시간경과에 따라 계속 증식이 나타났다. 역시, 염색실험 결과 복분자 추출물이 천연염료로 매염제(Al2(SO4)3·13-14H2O)를 사용하여 섬유인 면과 견에서 연한 베이지 색의 방향으로 염색이 나타났다. 기기분석 결과 1CP/OES로 측정한 복분자 성분에서는 K(221.100ppm), Mg(17.920ppm), Ca(5.129ppm), Na(2.940ppm), Si(0.638ppm)등의 무기성분들이 확인되었고, GC/MSD로 측정한 복분자 성분에서는 Boric acic(1.711), Silane(2.142), Propyl isothiocyanate(2.565), Pyrazole(3.481), Furfurole(11.521)등의 유기성분들이 확인되었다.

본 연구는 메이크업 화장품용 분체에 관한 리뷰논문이다. 분체는 피부 결함 은폐, 자외선 차단, 화장 지속성, 피부보호의 역할을 주요목적으로 한다. 이러한 기능은 분체의 형태제어, 표면처리, 캡슐화로 부여된다. 미래의 분체는 환경변화에 응답하는 스마트 형태로 진화할 것으로 보인다.

UV 경화기술은 라디칼 경화와 양이온 경화로서 크게 2 종류로 분류할 수 있다. 이 기술은 플라스틱과 금속간의 여러 기재에 대한 기능성을 개선하기 위해서 표면처리기술에 주로 초점이 맞추어져 왔다. 반면에, Electron beam 기술은 새로운 기능성 재료들을 창출하기 위해 중합공정뿐만 아니라 가교반응들을 다루었다. 이들 두 기술들은 종래의 열경화성 코팅과 비교할 때, 에너지이용 효율과 환경 친화적이어서, 건조와 경화 공정으로 부터 배출되는 탄산가스와 휘발성 유기물을 대폭 감소시킨다. 이 논문에서는 UV 경화 코팅에서 흔히 사용되는 라디칼 경화기술과, 최근의 있는 양이온 경화와 관련된 기술을 다룬 리뷰 논문이다.

Natural Curcumin belongs to Zingiber Officinale Roscoe was known to possess natural odor, natural taste, natural color, and other pharmaceutical & chemical characteristics. Natural Curcumin extract was made to use ethanol as a solvent was to show a yellow color having state of solid powder and an active component. Natural Curcumin extract tested pharmaceutical & chemical experiment to dilute in curcumin 1%-water solution. Curcumin extract tested antimicrobial experiment using microbe, and tested dye experiment using fiber. Some conclusions in the result of characteristics experiment was obtained as follow. The result of antimicrobial experiment showed that the growth of staphylococcus aureus (ATCC-001) and aspergillus niger (ATCC-002) as microbes decreased according to passage of time. This phenomenon could know that Curcumin compoment showed influence to antimicrobial effect. Also, the result of dye experiment showed that cotton and sick with fiber dyeing dyed in direction of dark yellow color. This phenomenon could know that Curcumin extract showed influence to dyeing effect in observation of optical electron microscope(OEM.) The result of instrument analysis ascertained inorganic components of K(53.300ppm), Na(1.150ppm), Ca(0.711ppm), Ti(0.351ppm), Li(0.256ppm), Cu(0.233ppm) etcs from Curcumin component with ICP/OES, and ascertained organic components of propanoic acid(1.859), benzene(10.814), phenol(14.194) etcs from Curcumin component with GC/MSD.

Natural Omija belongs to magnoliaceae was known to possess natural odor, taste, color, and various pharmaceutical & chemical characteristics. Omija extraction was extracted using ethanol as a solvent. Omija extract showed a light red-violet color of viscous liquid state. Some conclusions from the result of characteristic experiment were obtained as follows. From the result of antimicrobial experiment, occurrence of staphylococuss aureus and aspergillus niger as microbes was decreased according to the passage of time. This phenomenon could know that Omija component is affected to antimicrobial effect. From the result of dye experiment, fiber dyeing showed with some ivory color after dyed to cotton and silk. This phenomenon could know that Omija component is affected to dyeing effect from observation of scanning electron microscope(SEM). From the result of instrument analysis, inorganic components of K(107.30ppm), Na(2.110ppm), Ca(0.935ppm), Mg(0.891ppm), Li(0.270ppm) etcs from Omija were detected with ICP/OES, and aromatic components of benzene(10.808), a-pinene(13.996), phenol(14.183), β-terpene(15.840), a-terpinolene(17.616) etcs from Omija were also detected with GC/MSD.

Natural Ginger extract was extracted from Ginger component using ethanol as a solvent, and we tested various pharmaceutical characteristics in this extract. Characteristics experiment to use natural Ginger extract tested antimicrobial experiment using microbe, and analyzed organic and inorganic component with analysis instrument. From the result of characteristics experiment, some conclusions are obtained as follow. In this experiment, natural Ginger extract was obtained about 22.50 g-Ginger extract(extraction ratio : 1.80%) as liquid state of some viscous yellow-brown color. The result of antimicrobial experiment with staphylococcus aureus and aspergillus niger in microbe decreased more and more according to passage of reaction time. This phenomenon could know that Ginger extract has influenced to antimicrobial effect. In the result of instrumental analysis, aromatic organic components of benzimidazole(1.283), propyl isothiocyanate or isothiocyanic acid(1.477) etcs from Ginger extract were detected with GC/MS and inorganic component of Ca(27.6 ppm), K(24.08 ppm), Mg(6.03 ppm), Na(1.02 ppm), Zn(1.02 ppm), Sb(0.711 ppm) and Li(0.079 ppm) etcs from Ginger extract were detected with ICP/OES.

Natural grape extraction was extracted from grape component using diethyl ether as a solvent, and we tested various pharmaceutical and chemical characteristics of this extract. Characteristic experiments to use natural grape extract tested antimicrobial experiment using microbe in pharmaceutical material, and tested dye experiment using fiber in chemical material. From the result of characteristics experiment, some conclusions are obtained as follow. From the result of characteristics experiment, it obtained about 7.5%-grape extraction ratio as semi-solid state, and after dried in freezing from grape extract of semi-solid state, it obtained about 10%-grape extraction ratio as solid state of dark purple color. From result of antimicrobial experiment of grape extract, number of staphylococcus aureus (KCMC-01) and aspergillus niger (KCMC-02) in microbe decreased more and more according to time passage. This phenomenon showed that grape extract influences to antimicrobial effect. From the result of dye experiment of grape extract, it appeared in direction of dark purple color after dyed to use cotton and silk with fiber to control in pH 7.5. Specially the result which confirmed dye of fiber with optical electron microscope(OEM), we could know that it appears darker silk than cotton.

Natural Artemisia extraction was extracted from Artemisia component using diethyl ether as a solvent, and we tested various pharmacetical and chemical characteristics of this extract. Characteristic experiments to use natural Artemisia extract tested antimicrobial experiment using microbe in pharmacetical material, and tested dye experiment using fiber in chemical material. From the result of characteristics experiment, some conclusions are obtained as follow. From the result of extraction experiment, it obtained about 10.4%-Artemisia extraction ratio as semi-solid state, and after dried in freezing from Artemisia extract of semi-solid state, it obtained about 10%-Artemisia extraction ratio as solid state of dark blue-green color. From result of antimicrobial experiment of Artemisia extract, number of staphylococcus aureus (ATCC-01) and aspergillus niger (ATCC-02) in microbe decreased more and more according to time passage. This phenomenon showed that Artemisia extract influences to antimicrobial effect. From the result of dye experiment of Artemisia extract, it appeared in direction of dark blue-green color after dyed to use cotton and silk with fiber to control in pH 7.5. Specially the result which confirmed dye of fiber with optical electron microscope (OEM), we could know that it appears darker silk than cotton.

From the experiment result on pharmacetical characteristics and analysis of Garlic extract, some conclusions were obtained as follows. From the results on extract experiment of Garlic, extraction ratio was about 6.0%, and after dried with dry oven from Garlic extract, it obtained about 50%-Garlic extract of solid state. From results on antimicrobial experiment of Garlic extract, number of staphylococcus and fungus in microbe decreased more and more according to time passage. This phenomenon showed that Garlic extract keeps antimicrobial effect. From results on antioxidation experiment of Garlic extract, DPPH scavenging activity of free radical showed that Garlic extract appears more remarkable reduction ability than reference samples. This phenomenon means that antioxidation of Garlic extract appears higher than Vitamin-C and BHA. From results on instrument analysis, inorganic components of K, Na, Ca, Si, Mg, Zn etcs from Garlic extract were detected with ICP/OES and the fatty and aromatic components of trimethyl sulfide, diallyl disulfide, diallyl trisulfide, 2-mercaptobenzothiazole etcs from Garlic extract were detected with GC/MS.

From experiment results on pharmacetical characteristics and analysis of Glycyrrhizin extract, some conclusions are obtained as follows. From results on extract experiment of Glycyrrhizin, it appeared about 8%-extraction ratio as semi-solid state, and after dried in freezing from Glycyrrhizin extract of semi-solid state, it obtained about 70%-Glycyrrhizin extract as solid state of yellow gold color. From results on antimicrobial experiment of Glycyrrhizin extract, number of S-typhimurium and Fungus in microbe decreased more and more according to time passage. This phenomenon shows that Glycyrrhizin extract keeps antimicrobial effect. From results on antioxidation experiment of Glycyrrhizin extract, DPPH scavenging activity of free radical shows that Glycyrrhizin extract appears more remarkable reduction ability than reference samples. This phenomenon means that antioxidation of Glycyrrhizin extract appears higher than Vitamin-C and BHA. From results on instrument analysis, the fatty and aromatic components of 2-pentanone, cyclohexasiloxane, tetrasiloxane, benzoquinoline-2-carboxylic acid etcs from Glycyrrhizin extract was detected with GC/MS and inorganic components of Ca, Mg, Ti, Zn, Fe etcs from Glycyrrhizin extract was detected with ICP/OES.

From the result of pharmacetical characteristics and analysis of Green-tea extract, it could obtain some conclusions as follows. The extract experiment of Green-tea appeared about 10%-extraction ratio as semi-solid state, and after dried in freezing from Green-tea extract of semi-solid state, it obtained about 65% Green-tea extract as solid state. In the results on antimicrobial experiment of Green-tea extract, number of S-typhimurium and fungus in microbe decreased more and more according to the time passage. This phenomenon could show that Green-tea extract keeps antimicrobial effect. In the results on antioxidation experiment of Green-tea extract, DPPH scavenging activity of free radical showed that Green-tea extract appears more remarkable reduction ability than reference samples. This phenomenon means that antioxidation of Green-tea extract appears higher than Vitamin-C and BHA sample. In the results on intrument analysis, the fatty and aromatic components of aniline, acetaldehyde, acetic acid, trichloroethylene, caffeine etcs from Green-tea extract was detected with GC/MS analysis and inorganic components of Ca, Mg, Cu, Mo, Sb, Ti etcs from Green-tea extract was detected with ICP/OES analysis.

Modified polyesters (TTBA-10C, -20C, -30C) that contain phosphorus and chlorine were synthesized by the condensation polymerization of tetramethylene bis(orthophosphate), neohexanediol trichlorobenzoate, 1,4-butanediol and adipic acid, in which tetramethylene bis(orthophosphate) and neohexanediol trichlorobenzoate were prepared previously in our laboratory. In this study, two-component flame-retardant polyurethane coatings (TTBA-10C/HDI-trimer=TTHD-10C, TTBA-20C/ HDI-trimer= TTHD-20C, TTBA-30C/HDI-trimer= TTHD-30C) were obtained by curing at room temperature with the synthesized TTBAs and hexamethylene diisocyanate (HDI)-trimer as a curing agent. The obtained TTHDs were made into coating samples and used as test samples for various physical properties. The physical properties of the flame-retardant coatings containing chlorine and phosphorus groups were generally inferior to those containing only phosphorus group. Flame retardancy was tested by vertical and horizontal combustion method, and 45˚ Meckel burner method. Since the retardancy of flame-retardant coatings containing chlorine and phosphorus groups was better than that containing only phosphorus group, it could be concluded that the retardancy by the synergism effect of chlorine and phosphorus groups exhibited.

The influence of fluorophor, scatterer, absorber in turbid materials by light scattering were interpreted for the scattered fluorescence intensity and wavelength, it is studied the molecular property by laser induced fluorescence spectroscopy. It can be found that the effects of optical property are penentrated in scattering media by the optical parameters(μs, μa, μt, γ, σ). The value of scattering coefficient μs is large appeared by means of the increasing particles of scattering, it can be found that the slope appears exponentially as a function of distance from laser source to detector. It may also utilize in designing the best model for oil chemistry, laser medicine and application of medical engineering.

In order to improve resistant properties of water-borne acrylic pressure sensitive adhesives(PSAs) for automobiles, this study was carried out. Removable PSAs for automobiles were synthesized by emulsion polymerization of monomers, n-butyl acrylate(BA), n-butyl methacrylate(BMA), acrylonitrile(AN), acrylic acid(AA) and 2-hydroxyethyl methacrylate(2-HEMA), and AA and 2-HEMA could act as functional monomers for crosslink. Emulsion polymerization was carried out in a semi-batch type reactor. Water resistance, heat resistance, acid resistance, alkali resistance and smoke resistance were examined. As a result, water resistance increased with the amount of BMA, however, the effect of BMA content on the water resistance was insignificant at a range of over 14 wt%. The water resistance also increased with the amount of functional monomers, AA and 2-HEMA. The prepared PSAs satisfied all the standard for automobiles except heat resistance. However, the heat resistance comes nearly up to the standard. Also, acid resistance, alkali resistance and smoke resistance of the prepared PSAs satisfied with the standard.

To maximize a synergy effect in flame-retardancy of flame-retardant coatings, phosphorus and chlorine were introduced in polymer chains. Two-components PU flame-retardant modified polyesters (ABTTC-10C, -20C, -30C) were prepared by curing, at room temperature, of isocyanate (allophanate-trimer) and prepared modified polyesters which contain phosphorus and chlorine. To examine the film properties of the prepared flame-retardant coatings, film specimens were prepared with the prepared coatings. The film properties of ABTTC, ABTTC-10C and ABTTC-20C, which contain 0, 10 and 20wt%, 2,4-dichlorobenzoic acid (2,4-DCBA), respectively, were proved to be good, whereas the film properties of ABTTC-30C, which contains 30wt% 2,4-DCBA, were proved to be a little bit poor. Two kinds of flame retardancy tests, 45˚Meckel burner method and LOI method, were performed. With the 45˚Meckel burner method, three flame-retardant coatings except ABTTC showed less than 3.4 cm of char length, and showed less than 2 seconds of afterflaming and afterglow. From this result, the prepared flame-retardant coatings were proved to have the 1st grade flame retardancy. With the LOI method, the LOI values of the coatings containing more than 10wt% 2,4-DCBA were higher than 30wt%, which means that the coatings possess good flame-retardancy. From these results, it was found that synergistic effect in flame-retardancy was taken place by the introduced phosphorus and chlorine.

This experiment extracted the natural green-tea using ethanol and obtained the refined oil component after filterated green-tea extract. This study tested the antimicrobial effect as characteristics experiment, and analyzed refined oil component with pH-meter and GC/MS. In the result of this experiment, it obtained the next conclusions. In the first result of extraction experiment, it could know that extraction ratio of refined oil component appeared about 9.0%. In the second result of characteristics experiment, it could certificate that in case of increasing the refined oil component in concentration of 100ppm and above, and according to passage of cultivation time, the number of S-aureus and E-coli in microbe decreased less and less. But in case of blank test not adding the refined oil component, the number of microbe increased more and more. In these phenomena, it could certificate that refined oil component of green-tea appeared antimicrobial effect against microbe. In the third result of instrumental analysis, refined oil component of green-tea appeared about 7.6 in 1% distilled water solution with pH-meter, and the aromatic components of benzene, bonyl acetate, campene, α,β,γ-pinnene etcs from refined oil component of green-tea was detected with GC/MS.

The propagation of light radiation within tissues is an important problem that confronts the dosimetry of therapeutic laser delivery and the development of diagnostic spectroscopy. In the clinical application of photodynamic therapy(PDT) and in photobiology, the photon deposition within a tissue determines the spatial distribution of photochemical reactions. Scattered light is measured as a function of the distance (r) between the axis of the incident beam and the detection spot. Consequently, knowledge of the photosensitizer(Chlorophyll-a) function that characterizes a phantom is important. To obtain the results of scattering coefficients(μs) of a turbid material from diffusion described by experimental approach. It was measured the energy fluency of photon radiation at the position of penetration depth. From fluorescence experimental method obtained the analytical expression for the scattered light as the values of (I /Io)wavelength vs the distance between the center of the incident beam and optical fiber in terms of the condition of "in situ spectroscopy(optically thick)" and real time by fluorometric measurements.

We extracted pine-needles using ethanol as solvent, and we obtained the refined oil component from pine-needles extract. Also we tested the tyrosinase activated inhibition effect with melanin experiment and analysed with ICP/OES and UV/VIS. Accordingly we obtained the next conclusion from the result of this experiment. From the first result of this experiment, we could know that the degree of recovery of refined oil component from pine-needles extract appeared in about 8.0%. From the second result of this experiment, we could know that the tyrosinase activated inhibition rate increased more and more in case of increasing concentration of pine-needles, green-tea, vitamine-C. Also we could know that vitarnine-C influences to tyrosinase activated inhibition contained in pine-needles. From the third result of this experiment, we could know that inorganic materials of Ca, Mg, V, Mn, etc contained in pine-needles detected with ICP/OES analysis, and the absorbance of pine-needles extract appeared very high in UV/VIS analysis.

Cysteine-silver complexes were prepared and investigated the antimicrobial activity on rubber mat manufactured with waste rubber. We are exposed to harmful bacteria and fungi all the time. We manufactured antimicrobial mat to be imposed to mats that it can prevent generation of bacteria and microorganisms, and restrict their reproduction. Infection of medical devices causes significant morbidity and mortality. For aim of this study, we measured the antimicrobial mat manufactured with cysteine-Ag complex by CCD, FT-IR and NMR. The effect of mole ratio of cysteine-Ag complex on antimicrobial activity to bacteria and fungi is investigated. Reduction rate is evaluated using the Quinn method. Antimicrobial activity of complex on mole ratio 1:4 was effectively inhibited. The complexes had a better antibacterial activity than antifungal activity on rubber mat.