게임을 구현하는 동안 주기성을 보장해야될 필요성이 있는 경우가 많이 있다. 예를 들어 많은 경우에 캐릭 터의 충돌은 주기적으로 처리되어야 될 필요성이 있는데 주기적으로 처리하지 못하는 경우 게임에서 충돌 을 감지하지 못하는 경우가 발생할 수 있다. 또한 슈팅 게임에서는 많은 경우에 사용자의 편의를 위하여 특 정 버튼을 누르면 무기를 자동적으로 발사하는 기능을 포함하고 있어 주기적으로 무기를 발사해야될 필요 성이 있다. 한편 유니티를 사용하여 게임을 구현할 때 이러한 주기성을 보장하기 위해서 WaitForSeconds로 지연을 발생시킨 코루틴, InvokeRepeating, FixedUpdate, .NET의 Timers.Timer가 사용될 수 있다. 그러나 이러한 다양한 방법들로 인하여 방법의 선택에 어려움이 있어 연구를 진행하였다. 본 연구에서는 1분 동안 6000번 메서드를 주기적으로 실행하고 주기성과 횟수를 측정하였다. 또한 다양한 환경에서의 실험을 위하여 추가의 모델 렌더링이 없는 경우와 렌더링을 추가한 경우, 다양한 해상도에서 주기성과 메서드 호출 횟수를 모두 측정했다. 실험 결과, 부하가 적은 환경에서는 InvokeRepeating이 가장 6000회에 가까웠으며 부하가 큰 환경 에서는 Timers.Timer가 가장 6000회에 가까웠으며 실행 주기의 편차가 가장 적었다. 이러한 실험들을 통하여 유니티를 통하여 게임을 구현할 때 일정 시간 내에 실행되는 횟수가 중요한 게임에서 성능 부하가 크지 않 은 경우 InvokeRepeating을, 성능 부하가 크다면 .NET의 Timer를 쓰는 것이 적합함을 알아내었다. 본 연구를 통하여 개발자는 유니티에서 제공되는 주기성 제공 방법들 중에서 적절한 방법을 선택할 수 있다.

독립형 VR기기가 활발히 개발되기 전 스마트폰을 HMD로 만들려는 움직임이 있었고 구글의 카드보드와 삼 성의 기어 VR이 그 예이다. 하지만 독립형 VR기기의 출시와 모바일 기기의 한계로 현재는 대부분 AR로 전 환되어 사용되었다. 그렇지만 지난 10년간 모바일 VR과 AR의 기술도 발달했지만, 그동안 모바일 기기의 성 능도 향상되었다. 따라서 발달한 기술들을 바탕으로 손 추적을 뛰어넘어 손동작 분류를 모바일 기기에서 기 존의 VR과 AR 콘텐츠와의 상호작용에 활용할 수 있다. 본 논문에서는 Manomotion을 이용하여 2D 또는 3D 의 골격을 추적하고 손동작 분류를 구현했으며 게임을 사용하여 검증하였다.

In Korea, research on the introduction of dry storage facility is being conducted as an alternative to saturation of temporary storage facilities for spent nuclear fuel. The introduction of dry storage facilities requires a radiological impact assessment on the workers of the facility, and for this, an appropriate exposure scenario must be derived through work procedure analysis. In this study, the procedure for storing spent nuclear fuel in dry storage facilities was analyzed based on the case of evaluating the radiological impact of workers in dry storage facilities abroad. We investigated cases of radiological impact assessment on workers at on-site dry storage facilities by PNNL, Dominion, and P. F. Weck. PNNL and Dominion analyzed the storage work procedure of the VSC (Vertical Storage Cask) method using CASTOR V/21, TN-32, respectively, and conducted a radiological impact assessment. P. F. Weck analyzed the storage work procedure of various spent nuclear fuel casks for VSC and HSM (Horizontal Storage Module), conducted a radiological impact assessment. As a result of comparing the procedure for storing spent nuclear fuel by case, it was found that the storage procedure was determined by the storage method and the cask type. In the case of VSC method, canister-type casks and basket-type casks are used, and the storage procedure are partially different according to each. Canister-type cask requires repackaging from transfer overpack to storage overpack, but basket-type cask doesn’t require that procedure. In the case of the HSM method, only the canister type cask was found to be used. However, the storage procedure was different depending on the type of HSM system. Depending on the type of HSM system, the necessity of cask for on-site transport was different. In this study, we investigated and analyzed the work procedure according to the storage method of dry storage facilities abroad. It was found that the dry storage procedure of spent nuclear fuel different according to the storage method and type of cask. The results of this study can be used as basic when deriving the exposure scenario for spent nuclear fuel dry storage workers suitable for the domestic situation.

Non-destructive estimation of leaf area is a more efficient and convenient method than leaf excision. Thus, several models predicting leaf area have been developed for various horticultural crops. However, there are limited studies on estimating the leaf area of strawberry plants. In this study, we predicted the leaf areas via nonlinear regression analysis using the leaf lengths and widths of three-compound leaves in five domestic strawberry cultivars (‘Arihyang’, ‘Jukhyang’, ‘Keumsil’, ‘Maehyang’, and ‘Seollhyang’). The coefficient of determination (R2) between the actual and estimated leaf areas varied from 0.923 to 0.973. The R2 value varied for each cultivar; thus, leaf area estimation models must be developed for each cultivar. The leaf areas of the three cultivars ‘Jukhyang’, ‘Seolhyang’, and ‘Maehyang’ could be non-destructively predicted using the model developed in this study, as they had R2 values over 0.96. The cultivars ‘Arihyang’ and ‘Geumsil’ had slightly low R2 values, 0.938 and 0.923, respectively. The leaf area estimation model for each cultivar was coded in Python and is provided in this manuscript. The estimation models developed in this study could be used extensively in other strawberry-related studies.

In this study, graphene was rapidly grown by chemical vapor deposition using a liquid cell for supplying methanol as a carbon source of graphene. To realize the rapid growth, methanol which is carbon-contained organic solvent was used instead of methane gas, a widely used carbon source for graphene growth. The graphene grown with the growth time as a variable was transferred to a SiO2/ Si substrate with an oxide thickness of 300 nm to confirm whether it was grown with full coverage with an optical microscope. The results confirmed a full coverage in 0.5 min of growth. The Raman spectra also confirmed the G-peak position at 1585.0 cm−1 and an intensity ratio of 2D/G at 2.3 or higher. Concerning electrical transport characteristics, at an induced carrier density of 1 × 1012 cm−2, the hole (μh) and electron (μe) mobilities were 1524 cm2 V−1 s−1 and 1528 cm2 V−1 s−1, respectively. Thus, our study confirmed that high-quality, large-area graphene can be grown within 0.5 min.