This study was conducted to estimate the effect of different cutting lengths on fermentation characteristics and aerobic stability of whole crop rice (WCR) silage. The WCR was harvested at the yellow ripe stage (43.7%, DM), and then cut at 5 (R05), 10 (R10), and 20 cm (R20) of the theoretical length of cut with no cut WCR (R60). Each forage was ensiled into 20 L mini bucket silo (5 kg) for 150 days in quadruplicates. The cutting lengths were not affected the chemical compositions of WCR silage (p > 0.05). The pH (p < 0.001) and concentration of ammonia-N (p = 0.022) in WCR silage were increased linearly with the increase of cutting length. The concentration of lactate had quadratic effect (p = 0.007), which was highest in R20 silage (p < 0.05). The concentration of acetate was increased linearly (p = 0.014), but the concentration of butyrate was decreased linearly (p = 0.033). The lactic acid bacteria count was decreased linearly (p = 0.017), and yeast count had quadratic effect (p = 0.009), which was the highest in R20 silage (p < 0.05). Aerobic stability had strong quadratic effect (p < 0.001), which was the highest in R20 silage (p < 0.05). In conclusion, R60 silage had highest pH by a linear increase of ammonia-N concentration and led to low aerobic stability. While R20 silage had the lowest pH by high lactate concentration and led to high aerobic stability.

In this study, a chlorination technique for recycling Li2ZrO3, a reaction product of ZrO2-assisted rinsing process, was investigated to minimize the generation of secondary radioactive pyroprocessing waste. It was found that the reaction temperature was a key parameter that determined the reaction rate and maximum conversion ratio. In the temperature range of 400−600℃, an increase in the reaction temperature resulted in a profound increase in the reaction rate. Hence, according to the experimental results, a reaction temperature of at least 450℃ was proposed to ensure a Li2ZrO3 conversion ratio that exceeded 80% within 8 h of the reaction time. The activation energy was found to be 102 ± 2 kJ·mol−1·K−1 between 450 and 500℃. The formation of LiCl and ZrO2 as reaction products was confirmed by X-ray diffraction analysis. The experimental results obtained at various total flow rates revealed that the overall reaction rate depends on the Cl2 mass transfer rate in the experimental condition. The results of this study prove that the chlorination technique provides a solution to minimize the amount of radioactive waste generated during the ZrO2-assisted rinsing process.

The reaction between Li2CO3 and Cl2 was investigated to verify its occurrence during a carbon-anode-based oxide reduction (OR) process. The reaction temperature was identified as a key factor that determines the reaction rate and maximum conversion ratio. It was found that the reaction should be conducted at or above 500℃ to convert more than 90% of the Li2CO3 to LiCl. Experiments conducted at various total flow rate (Q) / initial sample weight (W i) ratios revealed that the reaction rate was controlled by the Cl2 mass transfer under the experimental conditions adopted in this work. A linear increase in the progress of reaction with an increase in Cl2 partial pressure (pCl2) was observed in the pCl2 region of 2.03–10.1 kPa for a constant Q of 100 mL∙min−1 and W i of 1.00 g. The results of this study indicate that the reaction between Li2CO3 and Cl2 is fast at 650℃ and the reaction is feasible during the OR process.

Biosilica is a material extracted from the shell (cell wall) of Melosira nummuloides, a type of sea diatom, and is one of the widely distributed biominerals. Recently, some studies have revealed that biosilica has a characteristic bio-modulatory activity compared to synthetic silica. However, there has been little research on the effects and action mechanisms of biosilica in immune cells. In this study, we investigated the effect of biosilica water on mouse dendritic cells (DCs), the most potent antigen-presenting cells in immunity, and whether it may alter the function of DCs. Biosilica water decreased the metabolic activity of DCs at 20% concentration (v/v) and the production of IL-1 beta in a concentration-dependent manner. And also, more cells with fragmented nuclei were observed in the DCs treated with 20% biosilica water compared to other treatment groups. The mixed leukocyte response experiment showed the biosilica water-treated DCs significantly modulated the metabolic activity and proliferation of allogeneic spleen cells compared to control DCs. This result suggests that biosilica water may modulate the antigen-presenting capability of DCs. Taken together, this study shows the immunomodulatory activity of biosilica on DCs and may affect immune responses. Further research is needed to investigate the immunological activity of biosilica water.

Strontium is known as a salt-soluble element during the electrolytic oxide reduction (EOR) process. The chemical behavior of SrO during EOR was investigated via thermodynamic calculations to provide quantitative data on the chemical status of Sr. To achieve this, thermodynamic calculations were conducted using HSC chemistry software for various EOR conditions. It was revealed that SrO reacts with LiCl salt to produce SrCl2, even in the presence of Li2O, and that the ratio of SrCl2 depends on the initial concentration of Li2O dissolved in LiCl. It was found that SrO reacts with Li to produce Sr during EOR and that the reduced Sr reacts with LiCl salt to produce SrCl2. As a result, the proportions of metallic forms were lower in Sr than in La and Nd under various EOR conditions. The thermodynamic calculations indicated that the three chemical forms of SrO, SrCl2, and Sr co-exist in the EOR system under an equilibrium with Li, Li2O, and LiCl.

The corrosion behavior of Hastelloy C-276 was investigated to identify its applicability for carbon-anode-based oxide reduction (OR), in which Cl2 and O2 are simultaneously evolved at the anode. Under a 30 mL·min-1 Cl2 + 170 mL·min-1 Ar flow, the corrosion rate was less than 1 g·m-2·h-1 up to 500℃, whereas the rate increased exponentially from 500 to 700℃. The effects of the Cl2-O2 composition on the corrosion rate at flow rates of 30 mL·min-1 Cl2, 20 mL·min-1 Cl2 + 10 mL·min-1 O2, and 10 mL·min-1 Cl2 + 20 mL·min-1 O2 with a constant 170 mL·min-1 Ar flow rate at 600℃ was analyzed. Based on the data from an 8 h reaction, the fastest corrosion rate was observed for the 20 mL·min-1 Cl2 + 10 mL·min-1 O2 case, followed by 30 mL·min-1 Cl2 and 10 mL·min-1 Cl2 + 20 mL·min-1 O2. The effects of the chlorine flow rate on the corrosion rate were negligible within the 5–30 mL·min-1 range. A surface morphology analysis revealed the formation of vertical scratches in specimens that reacted under the Cl2-O2 mixed gas condition.

The corrosion behavior of the Inconel X-750 alloy was investigated for its potential application under a Cl2-O2 mixed gas flow in an Ar atmosphere. The corrosion rate was found to be negligible at temperatures up to 400℃ under a flow rate of 30 mL·min-1 Cl2 + 170 mL·min-1 Ar, whereas an exponential increase was observed in the corrosion rate at temperatures greater than 500℃. The suppression of the corrosion reaction due to the presence of O2 was verified experimentally at flow rates of 30 mL·min-1 Cl2 (4.96 g·m-2·h-1), 20 mL·min-1 Cl2 + 10 mL·min-1 O2 (2.02 g·m-2·h-1), and 10 mL·min-1 Cl2 + 20 mL·min-1 O2 (1.34 g·m-2·h-1) under a constant Ar flow rate of 170 mL·min-1 at 600℃ for 8 h. The surface morphology analysis results revealed that porous surfaces with tunnel-type holes were produced under the Cl2-O2 mixed-gas condition. Furthermore, the effects of the Cl2 flow rate on the corrosion rate were investigated, indicating that its impact was negligible within the range of 5–30 mL·min-1 Cl2 at 600℃.

Here, the stability of stainless steel 316 (SS-316) was investigated to identify its applicability in the oxide reduction process, as a component in related equipment, to produce a complicated gas mixture composed of O2 and Cl2 under an argon (Ar) atmosphere. The effects of the mixed gas composition were investigated at flow rates of 30 mL/min O2, 20 mL/min O2 + 10 mL/min Cl2, 10 mL/min O2 + 20 mL/ min Cl2, and 30 mL/min Cl2, each at 600℃, during a constant argon flow rate of 170 mL/min. It was found that the corrosion of SS-316 by the chlorine gas was suppressed by the presence of oxygen, while the reaction proceeded linearly with the reaction time regardless of gas composition. Surface observation results revealed an uneven surface with circular pits in the samples that were fed mixed gases. Thermodynamic calculations proposed the combination of Fe and Ni chlorination reactions as an explanation for this pit formation phenomenon. An exponential increase in the corrosion rate was observed with an increase in the reaction temperature in a range of 300 ~ 600℃ under a flow of 30 mL/min Cl2 + 170 mL/min Ar.

The development of drugs from natural plant sources is at growing interest due to the limitations of chemical drugs in terms of side effects and cost-effective factors of natural medicines. Among the various components contained in natural plant materials, flavonoids are of increasing interest because of their extended biological benefits. Flavonoids are classified into various types according to their structure and possess different activities depending on the structure. In this study, the flavonoids contained in Artemisia, native to Korea were examined and reviewed. HPLC chromatograms of three Artemisia species (Artemisia annua L., Artemisia iwayomogi and Artemisia argyi H.) were examined from published sources and their component analysis by MS data were summarized. The various flavonoids of Artemisia were classified into 12 types according to the main structure, and 10 flavonoids based on various activities were examined. The 10 flavonoids were identified as quercetin, kaempferol, rhamnetin, diosmetin, luteolin, methoxyflavone, catechin, apigenin, malvidin and genkwanin with extensive reported studies till date. The ten flavonoids examined have been reported to be effective in preventing and treating various diseases and exhibit activities such as anti-cancer, anti-inflammatory, antioxidant, antiviral, anti-obesity, anti-diabetic and anti-Alzheimer. The collective results from the reported studies suggest that the three types of Korean native Artemisia, contains various flavonoids with beneficial activities and may have therapeutic effects against diseases.

PURPOSES : Almost every design method for airport concrete pavements considers only traffic loading and not environmental loading. This study proposes a mechanistic design method for airport concrete pavements, that considers both environmental and traffic loading simultaneously. METHODS: First, the environmental loading of concrete pavements in Korean airports was quantified. FEAFAA, a finite element analysis program for airport pavements, was used to calculate the maximum tensile stress (MTS) of the slab, caused by both environmental and traffic loadings. The factors that influence the MTS were identified via sensitivity analysis, and an MTS prediction model was developed using the statistical analysis program SPSS. The ratio of MTS to the tensile strength of slab was calculated using the prediction model. The fatigue model under the AC 150/5320-6E and AC 150/5320-6F standards of the FAA was corrected to make it suitable for the predicted stress-strength ratio. RESULTS : The MTS prediction model and corrected fatigue model were used to redesign the slab thickness and joint spacing of airport concrete pavements originally designed using the AC 150/5320-6D standard, which empirically considers traffic loading only. As a result, different slab thicknesses and joint spacings were redesigned with consideration for environmental loading, specifically the weather conditions of airports. . CONCLUSIONS: The slab thickness and joint spacing can be mechanistically designed at the same time, whereas previously, only the slab thickness was designed, and the joint spacing was determined empirically.