Material balance evaluation is an important measure to determine whether or not nuclear material is diverted. A prototype code to evaluate material balance has been developed for uranium fuel fabrication facility. However, it is difficult to analyze the code’s functionality and performance because the utilization of real facility data related to material balance evaluation is very limited. It is also restricted to deliberately implement various abnormal situations based on real facility data, such as nuclear diversion condition. In this study, process flow simulator of uranium fuel fabrication facility has been developed to produce various process data required for material balance evaluation. The process flow simulator was developed on the basis of the Simulink-SimEvents framework of the MathWorks. This framework is suitable for batch-based process modeling like uranium fuel fabrication facility. It dynamically simulates the movement of nuclear material according to the time function and provides process data such as nuclear material amount at inputs, outputs, and inventories required for Material Unaccounted For (MUF) and MUF uncertainty calculation. The process flow simulator code provides these data to the material balance evaluation code. And then the material balance evaluation code calculates MUF and MUF uncertainty to evaluate whether or not nuclear material is diverted. The process flow simulator code can simulate the movement of nuclear material for any abnormal situation which is difficult to implement with real process data. This code is expected to contribute to checking and improving the functionality and performance of the prototype code of material balance evaluation by simulating process data for various operation scenarios.

Nuclear power plants, which are important national facilities, require special attention against the threat of terrorism using various methods. Among the terrorist threats, as structural damage and human casualties due to explosions continue to occur, interest in the blast load is increasing. However, domestic nuclear power plants do not have sufficient design requirements for protection against the threat of explosives. To prepare for the threat of terrorism using explosives, it is necessary to evaluate the physical protection performance of nuclear power plants against blast load, and to use this to improve protection performance and establish regulatory standards. Most of the explosion-proof designs used abroad use the empirical chart presented by UFC 3-340- 02 (DoD 2008), which does not take into account the effect of near-field explosions. When explosions occur inside nuclear power plants, near-field explosions occur in most cases. In this study, it was assumed that explosives were installed in the corridor inside nuclear power plants. A spherical TNT was placed in the middle of the corridor floor to simulate near-field explosions, and the structure response according to the weight of the TNT was evaluated. The corridor was modeled with a reinforced concrete material and the LS-DYNA program was used for analysis. For the explosion model, the Arbitrary-Lagrangian-Eulerian (ALE) analysis technique applying the advantages of the Lagrangian and Eulerian methods were used. By analyzing the pressure history and the degree of deformation of the structure according to the explosion, the degree of threat caused by the explosion was analyzed. Based on the analysis of this study, physical barriers performance database (DB) using Modeling & Simulation (M&S) will be constructed by performing sensitive analysis such as representative structure shape setting, boundary conditions, material of structures, etc. The constructed DB is expected to be used to establish regulatory standards for the physical barriers of nuclear power plants related to explosives.

새롭게 육성된 낭충봉아부패병 저항성 신품종 토종벌(Apis cerana koreana) 과 기존 농가에서 관행적으로 사육되는 토종벌 사이의 형태학적 차 이를 육안으로 확연하게 구분하는 것은 어렵지만 본 연구에서는 신품종 토종벌(A. c. koreana) 을 기존 토종벌(A. c. koreana) 품종 및 계통 간 형태학적 비교를 통해 신품종 만의 특성을 결정할 수 있는 표현형 정보를 제공하였다. 신품종 토종벌(A. c. koreana)의 외부형질을 이용한 품종 특성은 22가지의 형태학적 특성을 기하학적, 형태학적 분석 방법을 적용하고 토종벌(A. c. koreana)의 로얄젤리 생산량, 일벌, 여왕벌, 수벌의 특성을 비교 분석하였다. 본 연구 결과, 신품종 토종벌(A. c. koreana)은 기존 토종벌과 앞날개의 길이에 차이를 보였으며, 중국의 동양종꿀벌(A. cerana)과 비교한 결과, 일벌은 몸무게, 혀의 길이, 앞날개의 길이 등의 값이 높았다. 또한, 신품종 토종벌(A. c. koreana)은 A. cerana indica 보다 두 가지 부위에서 형태학적인 차이를 보였다. 그리고 신품종 토종벌(A. c. koreana)은 로얄젤리를 다른 품종과 비교하여 많이 분비하여 봉군의 발육에 긍정적인 영향을 끼쳤다. 따라서 본 연구결과는 신규 육성 토종벌(A. cerana)에 대한 형태학적 분석 방법을 이용하여 품종을 분류하는데 도움이 될 것으로 기대한다.

A molten salt reactor (MSR) has considerably attracted attention due to its several advantages for the safety and efficiency over the light water reactors. Because the structural material in MSR is contacted with high-temperature liquid fuel during long-term, the excellent material for corrosion resistance is required to be applied in MSR. In this study, we evaluated the corrosion resistance for alloy 600 and 617, which are the nickel-based materials, in KCl molten salt at 800ºC for 100 h under Ar atmosphere containing less than 1 ppm of moisture and oxygen. After the corrosion experiments of alloy 600 and 617, the amount of the weight loss for them caused by the KCl molten salt were determined. In addition, the variation in the crystal structure, surface morphology, and elemental distribution was examined using X-ray diffraction and scanning electron microscopy equipped with energy dispersive X-ray spectroscopy.

Elite trees of evergreen oaks (Quercus glauca, Quercus acuta, Quercus salicina, and Quercus gilva) were selected from Jeju Island and Wando Island. Elite trees were carried out by modifying the tree selection criteria. Elite trees were selected by height, DBH, clear length, crown diameter, leaf length, and leaf depth. Regarding height, Q. acuta was the highest, and the other three tree species were similar. Clear length showed the same trend as height. In the case of Q. glauca, height showed a positive correlation with DBH, crown diameter and leaf depth. In the case of Q. acuta, positive correlations were shown with all characteristics of DBH, and correlation analysis between DBH and crown diameter, and leaf length and leaf depth also showed positive correlations. In the Pearson correlation coefficient of Q. salicina, height showed a positive correlation with DBH. In the case of Q. gilva, height showed a positive correlation with DBH (0.539). As a result of analyzing the principal components for each of the six growth characteristics, the four species were divided into two principal components with an eigenvalue of 1 or higher, and the cumulative explanatory power was 57% or more. Based on the principal component results, it was possible to confirm the relationship between growth and trait characteristics by species. Still, it was not easy to understand the relationship among each selection tree, so a cluster analysis was performed using the principal component score. Based on the distance levels 5.0 and 6.0 of the selection tree of each species, they were classified into 4-5 clusters. It is judged that the above results can be used as data for the selection of elite trees of evergreen oaks.

Aster koraiensis Nakai (A. koraiensis) which has been used as a food and medicinal plant in the past, is valuable as functional food material. Therefore, the aim of this study was to determine the antioxidant properties and major phenolics of A. koraiensis extracts with different ethanol concentrations (0, 50, 70, and 100% aqueous ethanol solution). When ethanol concentration in the extraction solvent was increased, extraction yield decreased; 34.2, 23.2, 21.0, and 5.5% in 0, 50, 70, and 100% ethanolic extracts, respectively. Total phenolics content and antioxidant activities of extracts were increased in an ethanol concentration-dependant manner. The major phenolics in the extracts were chlorogenic acid (21.264~58.666 mg/g), isochlorogenic acid A (10.432~145.353 mg/g), and isochlorogenic acid C(0.239~13.148 mg/g), and these phenolic contents were higher in 70 and 100% ethanolic extracts than other extracts. Significant correlations were observed between ethanol concentration of extraction solvent, antioxidant properties, and major phenolics. These results indicated that the optimal ethanol concentration for extraction was 70%.

This study examines the effects of the public’s perception of emergency medical service (EMS) on the public health system’s brand equity and the moderating effect of governance on this relationship using Keller’s customer-based brand equity model. It uses four EMS functions: rescue/first-aid and transfer activities; disaster prevention, preparation, and response activities; educational activities in urgent situations; and medical treatment in emergency rooms to examine the effects of them on brand meaning of the public health system. Our findings are important for understanding the public as customers of the public health system and devising and/ or adapting healthcare policies and marketing strategies to develop brand equity and increase customers’ loyalty to the public health system.

Periodontitis and periimplantitis are caused as a result of dental biofilm formation. This biofilm is composed of multiple species of pathogens. Therefore, controlling biofilm formation is critical for disease prevention. To inhibit biofilm formation, sugars can be used to interrupt lectin-involving interactions between bacteria or between bacteria and a host. In this study, we evaluated the effect of D-Arabinose on biofilm formation of putative periodontal pathogens as well as the quorum sensing activity and whole protein profiles of the pathogens. Crystal violet staining, confocal laser scanning microscopy, and scanning electron microscopy revealed that D-Arabinose inhibited biofilm formation of Porphyromonas gingivalis , Fusobacterium nucleatum , and Tannerella forsythia . D-Arabinose also significantly inhibited the activity of autoinducer 2 of F. nucleatum and the expression of representative bacterial virulence genes. Furthermore, D-Arabinose treatment altered the expression of some bacterial proteins. These results demonstrate that D-Arabinose can be used as an antibiofilm agent for the prevention of periodontal infections.

Fresh Omija (Schisandra chinensis) has good marketability, but its quality is difficult to maintain during storage and distribution. Freezing and freeze-thawing treatments can be utilized for the quality maintenance and processing of cold press juice. In this study, the color, antioxidant properties, and the major components of soaked liquor from Omija with freeze-thawing treatment were analyzed during the extraction periods. Each of the frozen and freeze-thawed Omija samples was soaked in 35% ethanol, extracted for 15 days, and used for analysis. The frozen and freeze-thawed samples showed a tendency toward better color and higher antioxidant activity and major component levels than the controls, and freeze-thawing was the best. The results of this study showed that freeze-thawing treatment improved the color, antioxidant properties, and level of the major components of Omija soaked liquor, and freeze storage is suitable for making soaked liquor.