The site used for a nuclear facility can be released after decommissioning if the results of dose estimation meet the regulatory requirements and the site release is approved by the regulatory body. RESRAD-ONSITE, developed by the Argonne National Laboratory, is a computer code used to estimate the dose to the residents on radiologically contaminated sites. The dose estimation for site release should consider various exposure pathways, including inhalation, ingestion, and external exposure. This study used RESRAD-ONSITE to evaluate the internal exposure dose and identify radionuclides due to the intake of food produced on radiologically contaminated sites. The upper limit of the clearance level of radionuclides expected to remain at the site was used as the source terms for the dose evaluation. In addition, the amount of food intake per capita was obtained from eight countries using nuclear power generation as of 2020. The default values of RESRAD were used for other parameters except for intake by type of food and source terms. As a result of the dose evaluation, the contaminated water and vegetables showed a great contribution to the exposure dose. The dose due to tritium in drinking water was highest in the third year. In addition, regarding the intake of vegetables, the internal exposure due to 90Sr was the highest in the first year.

As of 2023, there are a total of 24 nuclear power plants (NPPs) in operation in Korea, with 21 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Korean NPPs discharge radioactive effluents into the environment every year. Radioactive effluents from NPPs contain various radionuclides and materials, including 3H, 14C, Noble gas, particulates, and iodine Among the radioactive effluents discharged from Korean NPPs, 14C is a pure beta emitter with a half-life of 5,730 years. The human body can inhale and ingest 14C to cause internal exposure. In addition, the amount of 14C present in the environment is decreasing, but the amount of 14C discharged from NPPs is increasing. 14C discharged to the environment can be inhaled and ingested by the public around NPPs through various pathways. For this reason, it is very important to monitor and manage 14C because it affects the dose of the public around NPPs. Therefore, this study compared and analyzed the average emissions of 14C discharged from PWRs and PHWRs during the recent 10 years (2012-2021). An average of the public dose due to 14C released from NPPs depending on the reactor types from 2012 to 2021 was also compared. It is inevitable to discharge radioactive effluents while operating NPPs. Korea Hydro & Nuclear Power (KHNP) manages and monitors radioactive effluents released into the environment. According to a survey and analysis of 14C discharged from PWRs and PHWRs and the average dose of the public over the recent 10-year (2012-2021) around Korean NPPs, 14C released from PWR accounted for 3.1% of the total discharge but accounted for more than 93.67% of the total public dose. In addition, 14C discharged from PHWRs accounted for 1.12% of the total discharge, but its resulting dose to the public accounted for more than 83.87% of the total public dose. As a result of analyzing the public dose due to 14C from 2012 to 2021, it was gradually increasing every year. Based on these results, monitoring and managing 14C discharge and its resulting doses to the public are important in the future.

After the Fukushima nuclear accident in Japan in March 2011, many Koreans were concerned that products exposed to radioactive materials released from the nuclear power plant would be imported into Korea. Systematic radiation monitoring was required for food and daily necessities imported from the nuclear accident area. The need for a legal system to support systematic radiation monitoring was also demanded. The Act on Protective Action Guidelines against Radiation in the Natural Environment was enacted to resolve concerns regarding environmental radiation in Korea in July 2011. According to this law, radiation monitoring equipment has been installed and operated at major airports and ports nationwide. This paper aims to review the radiation monitoring system of the Korean government comprehensively. The legal system and the legal basis for radiation monitoring of imported cargo conducted by each department were investigated by analyzing the laws and regulations of radiation monitoring for the relevant cargo items. In addition, the current status of radiation monitoring by the government departments was examined to determine how radiation monitoring for imported cargo is performed within the legal system. The investigation of the current radiation monitoring system for imported cargo in Korea confirmed that radiation monitoring is conducted by classifying cargo items under the jurisdiction of each government department for all imported cargo. However, the reduction in efficiency of radiation monitoring of imported cargoes, unclear legal grounds for radiation monitoring of imported cargo by some departments, the occurrence of overlapping inspections by departments, and the difficult process of issuing the radiation test certificate required for customs clearance by the Korea Customs Service were also identified. As a result of the analysis, it was found that the current radiation monitoring system for imported cargo in Korea ought to be improved, taking into account efficiency, overlapping inspection, legal background, and the difficult process of issuing the certificates.

Metal waste generated during the dismantling of a nuclear power plant can be contaminated with radionuclides. In general, the internal structure is very complex. Thus, metal waste requires various cutting processes. When metal waste is cut, aerosols are generated. Aerosols are generally various particles of very small size suspended in the working area and remain for a considerable period. This may cause internal exposure of workers due to inhalation of radioactive aerosols generated when cutting radioactive metal waste. This study investigated various cutting processes and the size distribution of aerosols generated during the cutting process. The cutting process is normally classified into thermal cutting, mechanical cutting, and laser cutting. Thermal cutting includes plasma, flame, and oxygen cutting. Mechanical cutting includes mechanical saws, cutters, nibblers, and abrasive water jets. Stainless steel, carbon steel, aluminum, and copper are commonly used as cutting materials in nuclear power plants. The size of the aerosol generated from cutting showed a very diverse distribution depending on the cutting methods and cutting materials. In general, aerosol size is distributed within 0.1-1 μm. This size distribution is different from the 5 μm aerosol size suggested by the ICRP Publication 66 Lung model. These results show that it is necessary to conduct further studies on the size of aerosols generated when decommissioning nuclear power plants.

Transport packages have been developed to transport the decommissioning waste from the nuclear power plant. The packages are classified with Type IP-2 package. The IAEA requirements for Type IP-2 packages include that a free drop test should be performed for normal conditions of transport. In this study, drop tests of the packages were performed to prove the structural integrity and to verify the reliability of the analysis results by comparing the test and analysis results. Half-scale models were used for the drop tests and drop position was considered as 0.3 m oblique drop on packages weighing more than 15 tons. The strain and impact acceleration data were obtained to verify the reliability of the analysis results. Before and after the drop tests, radiation shielding tests were performed to confirm that the dose rate increase was within 20% at the external surface of the package. Also, measurement of bolt torque, and visual inspection were performed to confirm the loss or dispersion of the radioactive contents. After each drop test, slight deformations occurred in some packages. However, there was no loss of pretension in the lid bolts and the shielding thickness was not reduced for metal shields. In the package with concrete shield, the surface dose rate did not increase and there was no cracks or damage to the concrete. Therefore, the transport packages met the legal requirements (no more than a 20% increase of radiation level and no loss or dispersion of radioactive contents). Safety verifications were performed using the measured strain and acceleration data from the test, and the appropriate conservatism for the analysis results and the validity of the analysis model were confirmed. Therefore, it was found that the structural integrity of the packages was maintained under the drop test conditions. The results of this study were used as design data of the transport packages, and the packages will be used in the NPP decommissioning project in the future.

Currently, there are 25 nuclear power plants (NPPs) in operation in Korea, including 22 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Two NPPs, including Kori Unit 1 and Wolsong Unit 1, are permanently shut down and awaiting decommissioning. If Kori Unit 2, which is expected to be permanently shut down soon, is included, the number of decommissioning NPPs will be increased to three. Spent fuels (SFs) are continuously generated during the NPP operation, which are stored in an SF storage pool in NPPs to cool down the decay heat emitted from SFs. For safe NPP operation, SFs must be regarded as waste, and a disposal site must be selected to isolate SFs. However, an appropriate site has yet to be selected in Korea. SFs contain long-lived nuclides with a high specific activity. For disposal, it is important to characterize the nuclides in the fuels and delay the migration of the nuclides to the environment when SFs are placed in a future disposal facility. If the disposal container is broken, the nuclides in the fuels escape from the filling material, such as bentonite. These escaped nuclides are dissolved in groundwater and migrate to the surface of the earth. Thus, it is possible to assess the radiological impact, such as the exposure dose during and after the disposal, if the types and characteristics of nuclides in SFs are known. This study investigated the nuclides in SFs and identified exposure scenarios that may occur in the disposal process of SFs and migration characteristics when the nuclides leak into groundwater to propose a dose assessment methodology for workers and the public.

The Korea Laboratory Accreditation Scheme (KOLAS) is the national accreditation body responsible for providing accreditation services to testing and calibration laboratories. The primary objective of KOLAS is to promote the quality and reliability of laboratory testing by providing nationally and internationally recognized accreditation services. Laboratories accredited by KOLAS are required to meet rigorous international standards set by the International Organization for Standardization (ISO) and are subject to regular assessments to ensure ongoing compliance with the standards. KOLAS accreditation is highly regarded both domestically and internationally, and is recognized for providing high-quality and reliable testing services. The nuclear analysis laboratory at KINAC has been working to establish a quality management system to ensure the external reliability of analytical results and to secure its position as an authorized testing agency. To achieve this, a detailed manual and procedure for nuclear material analysis were developed to conform to the international standards of ISO/IEC 17025. This study presents the preparation process for establishing the management system, focusing on meeting technical and quality requirements for the implementation of the ISO/IEC 17025 standard in the KINAC nuclear analysis laboratory, specifically in the field of chemical testing (dosimetry, radioactive, and neutron measurement subcategories). The preparation process involved two tracks. The first track focused on satisfying technical requirements, with Thermal Ionization Mass Spectrometer (TIMS) and Inductively Coupled Plasma-Mass Spectrometer (ICP-MS) selected as the major equipment for analysis. Analytical methods for determining isotope ratios and concentrations of nuclear materials were determined, and technical qualification was ensured through participation in proficiency test programs, inter-experimenter comparison tests, and uncertainty reports. The second track focused on developing the quality system, including quality manuals, procedures, and guidelines based on the requirements of the ISO/IEC 17025 standard. Various implementation documents were produced during the six-month pilot period, in accordance with the three levels of documents required by the standard. Implementation of ISO/IEC 17025 is expected to have a systematic quality management process for the analysis lab’s operations and to increase confidence in KINAC’s nuclear analysis.

실버 페이스트는 상대적으로 낮은 열처리로 공정이 가능하기 때문에 전자 소자 응용분야에서 유용한 전극 재료이다. 본 연구에서는 은 페이스트 전극에 대기압 플라즈마 제트를 이용하여 전극 표면을 처리 했다. 이 플라즈마 제트는 11.5 kHz 작동 주파수에서 5.5 ~ 6.5 kV의 고전압을 사용하여 아르곤 분 위기에서 생성되었다. 플라즈마 제트는 대기압에서 수행함으로써 인쇄 공정에 더 유용할 수 있다. 플라즈 마 처리시간, 인가된 전압, 가스유량에 따라 전극의 표면은 빠르게 친수성화 되었으며 접촉각의 변화가 관 찰되었다. 또한, 대면적 샘플에서 플라즈마 처리 후 접촉각의 편차가 없었는데, 이는 기판의 크기에 관계없 이 균일한 결과를 얻을 수 있었다는 것을 의미한다. 본 연구의 결과는 대면적 전자소자의 제조 및 향후 응 용 분야에서 적층 구조를 형성하는데 매우 유용할 것으로 기대된다.